The 18” x 9” is the perfect size wheel to fit the 240 tire. Sturgis Wheel offers it in most of the styles. On all other custom swing arm kits and bikes check with the manufacturer and us to make sure. Yes. The balancing of the wheel and tire combination together is the best way to insure the smoothest ride. Sturgis Wheels will come to you perfectly balanced. But some tires may not.

Several people have successfully installed 18" wheels on their E46's, however it is unlikely that this improves performance over a 17" wheel. The advantages of a larger wheel are better steering response and aesthetics. The disadvantages are greater unsprung weight (may affect suspension response) and greater rotational momentum/inertia, i.e. acceleration and braking will suffer.

All M coupes use the same size tires (225/45ZR17 in the front and 245/40ZR17 in the rear) mounted on one of two versions of the five-spoke "M RoadStar" alloy wheel. Both are sized 7.5x17-inch (front) and 9x17-inch (rear), but there are two distinct finishes: Early M coupes (S50 and S52 engines) feature a Chromeline finish, while the later models (S54 engine) utilize a darker Chrome Shadow finish.

Yes we do - and we will be adding this information to the website shortly. The advantage of purchasing a wheel/tire package is that you are eliminating the need to have your wheels and tires balanced by your tire shop - we do that for you. Not only does this save you the money that it would cost at an independent tire shop, you also reduce the risk of that tire shop damaging the wheels.

If you are comfortable on your current bike, we take 3 measurements off of your current bike and build the bike to those specifications. We have been very successful in providing bikes that fit perfectly using these measurements. The fit is guaranteed, and we will swap stems as you need to get the fit correct. If you don't have a bike that fits well, check out our bike fit recommendations under the "Bike Fit" tab. These are general recommendations based on height.

Never try to mount your own tires. Tire mounting is a job for the people who have the proper equipment and experience. If you try to do it yourself, you run the risk of serious injury to yourself as well as possible damage to the tire and rim. Never choose a smaller size than those that came with the car. Tires should always be replaced with the same size designation -- or approved options -- as recommended by the vehicle manufacturer.

Some replace the factory wheels to customize their car or to facilitate plus sizing, while others purchase aftermarket wheels to use on the track. Whatever the reason, a wheel and tire package selected must fit within the wheel well without rubbing on the suspension or fender. On street cars, it should have an overall diameter that is within ?3% of the factory specification.

There were two available wheel and tire sizes for the M635CSi. Early European-spec cars used the standard 6 Series metric-sized wheels (390mm x 165mm) with 220/55VR390 Michelin TRX tires. However, optional from the start of production (standard in some markets) were larger, two-piece alloys in a cross-spoke design measuring 415mm x 195mm (16.3-in. x 7.7-in.). Cars with these wheels carry 240/45VR415 Michelin TRX tires.

Any medium to heavy duty tripod will work. Even though the MICRODOLLY JIB Arm only weighs 9 lbs. (4.08kg), remember you need a tripod that will support the total weight of the camera, Jib, and counterweight.

We have a 285/35/18 A048R fitting very well currently. We hear that a 305 can fit, but have not yet tested.

on factory Buick wheels using a 3/16" spacer between the axle-hub and rear drum (intermittent slight rubbing)

A proper fit is often unique to each individual skater. However, in general, the boots should be just slightly longer than the length of the foot or ? or ? size larger than the foot for a growing child. The ball of the foot should lay flat and the toes pushed slightly together. A little wiggle room for the toes is acceptable. The width should not be so wide that you can curl your toes under or have to put two pairs of growth innersoles to take up the space. The heel must be very snug.

To assure proper fit, orthotics must be designed and cut to fit in a specific shoe type that has a determined amount of volume. Orthotics are also designed differently for their specific application (i.e. cycling vs. running vs. golf). That being said, it is possible to use an orthotic made for a specific purpose and shoe in a different shoe for a different purpose. Most people find that two pairs cut slightly different will fit into the majority of their shoes.

It depends on the type of wheel. For wheels that use a Rivet Nut attachment, you do NOT need to remove the tires to install the Natural-Fit. For wheels that use a Tab attachment, the tires need to be removed to install the Natural-Fit. For “flat free” or solid insert tires on wheels with Tab attachments, the Natural-Fit must be installed prior to the solid insert tires.

The Natural-Fit is available for 22", 24", 25" and 26" wheels (including spoked wheels, Spinergy Wheels, X-Core, and mag) with either a 1) 6-position tab mount (e.g., connecting screws go perpendicular to the axle into the wheel rim and through flat tabs on the handrim), 2) a 6-position rivet nut mount (connecting screws go parallel to the axle through plastic round spacer sleeves), or 3) a 6-position or 7-position mag wheel mount.

In 99% of the cases, wheel covers are interchangeable among different makes and models as long as you stay within the same tire size. In other words, our wheel cover line will fit 99% of all vehicles on the road today. In the majority of cases a 14" wheel cover will fit a vehicle with 14" tires. The same is true with all other wheel sizes*.

We stock many styles of center caps for specific vehicle models. Wheel center caps are not generic fit. Return To Top

Any 13-24” steeel, alloy or mag wheel and all golf cart wheels can be fitted with Cap Ads™. Currently trucks & buses etc cannot accommodate Cap Ads™ however development is on the way to make this possible. Cap Ads™ for these will soon be available. Cap Ads™ are immediately available in 13, 14, 15, 16, 17, 18, 19, 20, 22, & 24 inch and all golf cart wheels.