No. Heaters are not UL Listed (Underwriter's Laboratory) for installation over a bathtub or in a shower.

The rooms have a bathtub and shower combination with the exception of some accessible rooms which have a roll-in shower.

The pendant is water resistant and should be worn in the shower or tub as accidents can often occur in those areas. Yes. When you sign up for our service, we will have you provide us with an emergency response plan that we will follow in the event we cannot directly communicate with you through the system and find out the best way to respond. You are able to specify up to four personal responders (friends or family) in addition to EMS.

Yes, provided it is protected by a Ground Fault Circuit Interrupter (GFCI). Keep in mind, however, that any ventilation device located in a damp environment may have a reduced life due to high humidity and a potential for corrosion. Fans used in high-humidity areas should be operated for longer periods of time, to ensure the removal of moisture and to reduce the potential for condensation in the fan body or ducting.

The Jefferson Water Department softens the water, but the bypass process does leave some of the "hard" minerals in the water. These minerals will combine with soap and can leave a "scum" ring if not rinsed or wiped off after use of the tub or shower. If this ring is not removed, the minerals may accumulate to form a hard scale that is difficult to remove.

No, you get to pick them out. We work closely with some very good fixture suppliers and will be happy to recommend them to you. In addition to that we will look after the purchase and delivery of them for you if you like.

No shower for the first 48 hours. You may bathe as long as you don't get the lasered area wet. You will have a postoperative appointment about 24 hours after the surgery. At this first postoperative appointment we will teach you how to change the dressing. The day after your first postoperative appointment you can remove the dressing, shower, and reapply the dressing yourself.

We recommend that you have your pool shower installed by a professional plumber or swimming pool contractor. Complete installation guidelines are included with each unit. Orders must be Pre-Paid by major credit card: Visa, MasterCard, Discover, Certified Check, Money Order, or Check in Advance. Aquamasters, Inc. reserves the right to require a certified check in lieu of credit card for certain items. All Sales are Final. No returns on special order items.

It's generally very easy to do, and there is a standard size of shower head mounting so you can't get "the wrong size". Check out www.HowToInstallAShowerHead.com for more info.

Basic use of hand tools are required. You will have to drill some holes in each wall. Use a level on the jambs and a hack saw to cut the header and sill and you must apply silicone. You should hire a professional if you are not comfortable with hand tools.

Have your assistant help you by locking the wheels on the Bath Helper and disabling the swivel seat feature. Then have the assistant depress the slide release button and push you down the track making sure to lift your legs over the bath wall.

Warmrails are designed to be splash proof. They are not designed for immersion in water, being drenched in water or in fact anything more than the occasional splash. If there is a chance that the Warmrail could encounter more water than the occasional splash it should not be mounted in that location. A showerhead in the bath will definitely cause a lot of splashing. Your Warmrail should be wired into a circuit that is protected by a GFI (circuit breaker).

Dr. Woods uses a 'plastic surgery' closure of both the MIS total knee and MIS total hip replacement wounds. This is essentially a single running stitch of dissolvable suture material that is woven from side to side down the length of the 2 ? to 5 inch hip incision or the 4 to 6 inch knee incision. This is in turn covered with a plastic paint-on dressing called Dermabond. There are no sutures to take out or that would allow infection to get under the skin.

All the vessels carry a good supply of water but it is important to remember that a boat is totally self-contained and in wilderness areas not always near a water supply. We ask that people not shower every day to help conserve water.

In '94 you could get a shower at the Teller Hotel in Silverton for a couple bucks. I assume this is still the case. This is ordinarily an easy walk from the start/finish, but I wouldn't want to do it after the run! There are no showers at the South Mineral Creek campground. In '94 I carried one of those disposable cameras with me during the run, and it was well worth it. This is one really spectacular area! You can see the results at http://microserf.lanl.gov/bpw/hrh.html.

If you have attempted to clean the finish with normal household cleaners, and it is still stained and or dirty, the usual cause is that the surface glaze has been sanded or etched by harsh chemicals and/or abrasive cleansers. Because of this, there is nothing you can do to restore the shine yourself.