Unfortunately, that's far too complicated a question to answer here. In general, turn compression off, and turn uucp 'spoofing' on. This can all be done on the fly by sending register settings as part of your send-expect sequence when you call out, or you can do so as part of your modem initialization string in static. Some Telebit modems don't save the register settings. You might have to set the registers in both the init string and in the calling sequence.

Sure, you could do that, but it's not a good idea for several reasons. First, a vast majority of ISPs won't let you legally use a residential cable modem or a DSL line to host a public server. You would have to get a more expensive business package. Second, ADSL and cable lines usually have lower upstream bandwidth than downstream bandwidth, so your site may appear to be sluggish under heavy traffic. Third, DSL and cable lines have a much lower reliability than dedicated T1 or better lines. See similar questions...

Modern pacemakers do not need any special precautions. For somewhat older devices we advise to keep a distance of 6 inches / 15 centimeters between the cellular phone and the pacemaker site. Go to “mobile phones” for more information. See similar questions...

You may use any you'd like. Please note: it is your responsibility to purchase the correct, DSL appropriate, modem. If you need assistance, please contact our customer support team. See similar questions...

No, Alpha Telecom has a list of approved modems that have been tested with the ADSL service and are ACA approved. You may install a non Alpha Telecom if it is approved. Most importantly, it is a legal requirement that any equipment connected to the ADSL Service must be labelled with the ACA telecommunications compliance mark. See similar questions...

It can reach speeds of up to 61 kbps under perfect conditions--but such perfection is elusive. You'd need an especially clean, quiet line from the phone company's central office to your house, no problems with the FCC, and all-digital service between the phone company and your ISP, assuming you're connecting to one. But this was all before the FCC puts on the brakes. The chilling news came just days before U.S. See similar questions...

ClearSail recommends that no modems be used under the speed of 56K. It is recommended that you consider upgrading to a 56K x2 or v.90 modem. These modems will perform approximately twice the speed as a 28.8, and with prices coming down, most major computer stores offer 56K v.90 modems for under $50.00. See similar questions...

A#8.6: Currently the GNO serial drivers only support the two built-in serial ports. This does not imply that you cannot use a serial card in a remote machine (such as a IIe) that is connecting to your IIgs running GNO. A#8.7: These settings will usually work. See the Notes, below. See similar questions...

Basecamp is a great example of a web application done right. However, the state of mobile web browsers makes the experience much less useful on a phone than on the desktop. The limited size of the screen and the overall slower data speeds can make for a frustrating experience. Even on fast networks, browsers just respond like they do on the desktop. Just take a look at the mobile version of the basecamp overview screen on a windows mobile smartphone. See similar questions...

Many people (including myself) use things like "they" and "one" to get around the gendered pronoun problem, and they can work quite well in that purpose. But ultimately they are not satisfying solutions, because they only allow for limited types of use. "They" and "them", for example, can be used with indefinite persons by combining with "somebody", "anybody", "no one", "everybody" — as in "if anyone calls, tell them I'm not here. See similar questions...

Good quality temporary bonds may be made with cyanoacrylate (e.g. "super glue"). An added benefit of cyanoacrylate bonds is that the bond easily achieves electrical contact. The length of time the bond will last will be application dependent, from seconds to years. For a short time the performance of the part is very close to that achieved using the best bonds, which makes it useful for exploratory work. See similar questions...

Inserting debug statements into code is a low-tech method for debugging it. It usually requires that output be scanned manually every time the program is run to ensure that the code is doing what's expected. It generally takes less time in the long run to codify expectations in the form of an automated JUnit test that retains its value over time. See similar questions...

Debuggers are commonly used to step through code and inspect that the variables along the way contain the expected values. But stepping through a program in a debugger is a manual process that requires tedious visual inspections. In essence, the debugging session is nothing more than a manual check of expected vs. actual results. Moreover, every time the program changes we must manually step back through the program in the debugger to ensure that nothing broke. See similar questions...

Enter your quote and service availability request information below to view, shop and compare DSL rates in "real time". See similar questions...

The v.92 modem-on-hold function is software that is located on your computer that should have come with your modem or computer. See similar questions...

Yes you can, but there are some complications you need to be aware off. If you have a permanent connection, with a fixed IP number then there is no problem. If you have a fixed IP number but you don't have a permanent connection then your site will not be available sometimes and you may wish to consider putting your Web or FTP site on a permanently connected computer- it can be very frustrating for users of your site to find that it is mysteriously not available some times. See similar questions...

The internal modem is a 56k baud modem, which uses modem manager technology. Modem Manager Technology initializes the modem, it answers the phone when a call is received and it controls the flow of data to the modem during dropouts. This eliminates most common problems. The internal modem will take over communication port 2 on the Nexus 1250. Port 2 can then become a gateway for other Modbus based serial devices. See similar questions...

Not for DSL. A DSL modem is required. Your old modem can still be used if you are ever away from your DSL line and need to connect to LavaNet via traditional dialup. See similar questions...

Although our headsets are not tested to work with modems, we have had some customers request this and have had reported back to us that they have been successful. However we cannot guarantee that this will definitely work. See similar questions...