Yes, the halogen lamp doesn't differentiate between whether the power source is AC or DC, as long as the potential is 120 Volts. However, when the lamp fails, the filament will break and may draw an arc. You need to fuse properly for this event.

If you want a long lasting and more powerful, professional quality dryer, buy an AC motor dryer. A dryer with a DC motor is usually lighter and less expensive, however it will need to be replaced more frequently. DC dryers are best suited for at home use.

Dimming increases incandescent lamp life, and haloge lamps are incandescent lamps. Lutron test data suggests that all halogen lamps will have an expected lamp life similar to that of other incandescent (non power factor corrected) lamps when dimmed, i.e. a halogen lamp dimmed 25% has a life extension of about four times that of a non-dimmed lamp.

Halides are reactive elements that include iodine and bromine. These are added in very small amounts to the inert argon gas in the lamp. The "halide cycle" acts to redeposit tungsten evaporated from the filament thereby preventing the tungsten from condensing on the inside of bulb, causing gradual darkening.

LBL Lighting manufacturer recommends the Xelogen lamp, if available. Unlike MR 16 Halogen's parabolic dome-shape metal housing, Xelogen bulb gives off more evenly dispersed lighting and makes the colors from hand blown glass shade glow much better. The socket will receive both the Halogen and Xelogen bulbs. Thus, if you pick Xelogen on your order now, you can always switch back to MR16 Halogen later. MR16 Halogen bulbs are widely available in most hardware stores for about $2-3 apiece.

All Watchdog systems will switch to DC battery power when the AC power is out, or when the main pump fails. But if the power is on, the AC/DC Big Dog can pump directly off of the AC wall current without depleting the battery. The other systems will only pump off of battery power.

With DC (Direct current), the current always flows in one direction with no relation to change in time, as is the case with a dry cell battery or a car battery. (The DC output of Honda generators is for charging batteries only.) Alternating current, on the other hand, reverses its direction at uniform time intervals. Almost all-household electrical appliances are made to run on alternating current. Well, let’s use an example to illustrate why.

Large offshore wind farms over 100 MW generally use HVDC (High Voltage Direct Current) because DC technology : DC emits about 5% of the electromagnetic radiation of AC which is good for elasmobranchs (sharks etc)

Both AC and AC/DC welders have a large transformer in them that converts the power from the wall outlet to a voltage that is proper for welding. AC welders simply convert the outlet AC voltage - DC welders convert the voltage AND change the AC from the wall outlet to DC. When the electricity is changed to DC, it has a polarity associated with it. AC (alternating current) power has no specific direction - it cycles back and forth 60 times a second (alternates).

Yes, both AC power source or dry batteries can be used on our Techwinder. So you could use it anywhere in your home or office or store, or place it inside your safe or vault to safe guard your watch collection while winding your watch at the same time.

Most of the countries use alternating currents (AC). DC stands for direct currents. All appliences and voltage transformers run only on AC electricity. There is no worldwide standards for the plug configuration. Plugs, plug shapes, electric outlets differ from country to country. For that reason you need to get a plug adapter, in order to plug your aplliance into foreign electric outlet. You still need a voltage converter, otherwise you might demage your applience or cause fire!

It works through the halogen cycle. As tungsten evaporates from the filament, it combines with halogen gas and becomes tungsten halide. This tungsten halide state is maintained at temperatures between 250°C and 1400°C. The temperature of the bulb is kept above 250°C in order to maintain this state and prevent the tungsten from sticking to the bulb wall and darkening it.

MR16 lamps without front glass should only be used in a closed fixture (fixture that keeps all parts of bulb enclosed) since the filament tube of all MR16 lamps is pressurized. In the unlikely event that the filament tube breaks, the closed fixture keeps glass particles from leaving the fixture. MR16 lamps with a built-on cover glass can be operated in an open fixture since the cover glass will contain any broken pieces of the filament tube.

A halogen lamp emits 95 % of light that is within infrared wavelength field and its energy characteristic is basically the same as with infrared lampsr.

Technically speaking it could and it is possible to adapt the light colour produced. However, this would lead to substantial loss of intensity, thereby canceling out the particular advantages gained. i.e. Increased driver concentration and reflection of the road marking etc of white light. The International regulations governing light distribution and intensity on the road are very strict. Xenon light falls well within these standards.

Most commonly used functions are accessible through Icons located on the top or bottom of the screen. Different screens are designed to have a similar look and feel, pull-down button are commonly used for looking-up predefined items selection.

The 600 watt HPS is the most efficient High Intensity Discharge lamp to operate to date. It has the highest lumen per watt ratio of any of the HID lamps on the market.

Search our FAQ for information about Associated Content, including signing up, submitting content, making money, managing your account and partnering with AC. Tip: Type "CTRL" + "F" to search for a keyword related to your question. (Example: If you have a question about submitting a video, search for the word video.)