Periodically the demonstration copies and some licensed copies of the ODBC/32 driver expire. Please contact your Minisoft sales representative about getting an extension. The port number specified on the client must match the port number in the MSJOB file for the ODBCSRVR process. As shipped, this number is 30006. The address given in the DSN is not that of the HP 3000 CPU. Most TELNET access to the HP e3000 is via an external box (DTC) and is a separate address from the HP e3000.

This could be a symptom for a range of problems resulting in you not being able to connect to the tracker, you internet connection going down, firewall/router interfering with your connection, server/tracker being busy or even being banned from a tracker, most commonly this error will resolve itself or you could try restarting your client.

If you are at work, check with your system administrator to see if your system has access to all system files. Access to some Web pages can be restricted at the work place by your administrator. If you are still unable to see our Web page, call Access Group toll-free at 800-282-1550, Monday through Friday, 9 a.m. to 8 p.m. ET.

This error is caused by a setting in your FTP client, that limits the amount of time your FTP client will wait for a server to respond. In order to fix this problem, increase the "server timeout" setting; a setting of 180 seconds should be enough time to connect to the archive.org servers. If you use SmartFTP, the "server timeout" setting can be found in Tools > Settings > Connections.

Try telnet <hostmachine> <port> and see if it's listening. You should get some form of response from the server (actual text varies by vendor & version). That will connect to the server, bypassing the freetds.conf file. If it doesn't work, the problem lies upstream. That will connect to the server using freetds.conf. This allows you to isolate freetds.conf mistakes. man tsql for more. Check your ./configure and environment variables.

Answer: First of all, check which ip address do you used for remote control. Goto "log" folder to find "sys" log file in ezProxy. You would find such line "16:12:32;service [remote control:127.0.0.1:7532] starting". From this message, you could know the IP address and port used by remote control. Then when you do ezProxy Manger login, you must use the correct address to login. Attention, if address is 127.0.0.1, you can not login unless on the same host.

This error is caused if there is no Connection object associated with the Command Object. To resolve this This is caused if you are attempting to use the same DataReader more than once in your code without closing the previous Datareader. Or you might have a DataReader open on the same connection as the DataAdapter/Command uses.

Wide-ranging OnLine Data for Epidemiologic Research (WONDER) -- is an easy-to-use internet system that makes the information resources of the Centers for Disease Control and Prevention (CDC) available to public health professionals and the public at large. It provides access to a wide array of public health information.

Very likely there is either a network problem or a technical problem with the server. Check the Audio Stream Support forum to see if someone else has already reported the problem. If not, try reconnecting after a while and if it still doesn't work, start a new thread with subject that describes your problem.

Your firewall may be restricting communication between your PC and the SEER server (over the Internet). Your firewall needs to allow communication via ports 2038 and 2039. This problem is not that uncommon, your network administrator may be able to fix it. You should check with your network administrator. Please provide them with the information in the "How should my firewall be configured?" FAQ.

Genesis tries to connect to an instance of the GO database at discover.nci.nih.gov/GEEVS port 3306. Connecting is either prevented by a firewall on your computer or by a firewall in your network, which causes the exception.

This error means that the connection to your web site or server was denied. This usually happens if a web site or server is protected by a firewall or the server reaches its connections limit and drops or denies the connection from our system.

This error is caused by a setting in your FTP client, that limits the amount of time your FTP client will wait for a server to respond. In order to fix this problem, increase the "server timeout" setting; a setting of 180 seconds should be enough time to connect to the archive.org servers. If you use SmartFTP, the "server timeout" setting can be found in Tools > Settings > Connections.

The connection to your network operator may be interrupted while accessing your ordered items. Simply make a new attempt to retrieve your download. Some of the downloads available are not compatible with all mobile phones. For this reason, the server automatically determines your handset model and lets you know if your phone can handle the requested download.

A connection attempt failed because the connected party did not properly respond after a period of time, or the established connection failed because the connected host has failed to respond. The most likely cause of this error message is that both you and the user you are attempting to communicate with are behind firewalls or a NAT with no port forwarding activated. You will need to refer to your firewall / NAT documentation for information on setting up port forwarding.

If you try to send mail via our SMTP Server (mail.yourdomain.com port 25) just remember it needs SMTP authorization as well as POP3 authorization, and you have to use your mail-box login and password. Please read Help for you local mail program (Microsoft Outlook, or anything else you use). You can contact our Support Team for help shall you face any difficulties or need detailed instructions.

If you are trying to connect to the news server from your GDN account and were refused, there may be a problem with the news server or the load may be high.

Mail Direct connects to the recipient's mail server directly to send mail. But, sometimes it can't connect to the target host for various reasons. For example, connections may not be allowed to some hosts in military networks, or perhaps a host may be experiencing problems. Usually, however, the problem exists in your network. Be sure you have a good internet connection.