Yes, we use a heavy-duty piezo ignition system and the switch for it is located next to the temperature control. In case igniter fails to light, there is a 1/2" opening on the right side of the body of the grill where the burner can be lit manually.

We use only stainless steel for our burners and we build them ourselves. The burner has a lifetime warranty. If there is a problem with the burner we will replace it.

Yes, the Coastal Professional Barbeque Grill is an indirect heat grill. On the inside of the grill there is a 1/8" thick steel baffle. This design serves three purposes: 1) A very consistent overall grill temperature so you do not have to worry about crossover grilling because the entire grill surface is very consistent. 2) You will have limited flare-ups because of the deflector shield. 3) A convective grill that cooks from the top as well as the bottom.

Gauge on the Body and 16 Gauge on Lid. The materials used are heavier than most of the other barbeque grill manufacturers. The Coastal Professional Barbeque Grill is all handmade using all barstock steel tubing for the frame; no angle iron is used on any part of the grill. All welded barstock construction gives the barbeque grill impeccable strength and will last for many years.

The 20" X 24", 2 X 3 and 2 X 4 Grills temperature range is from 275 degrees to 500 degrees. The 3' X 4 1/2' Pull Behind Pig Cookers temperature range is from 180 degrees to 500 degrees.

On the bottom of the body of the grill, where the steel is creased, there is a slight pitch from left to right and the grease and drippings constantly drain as they fall off of the top deflector shield and drain into a spout on the bottom right-hand side of the grill where there is a hook for a grease pail. There is no waiting for an accumulation of grease for it to drain.

Absolutely, to clean the grill it is just a matter of removing both deflector shields inside the grill and you have plenty of room to work with. Just a matter of taking a paint scraper and working grease and drippings to one side and taking a regular spray hose and forcing it out the two air intakes on the left side of the grill. There are no messy lava rock or ceramics to deal with.

The finish is a industrial grade semi-gloss; high heat rated enamel black paint designed to last for many years. Most barbeque grills today are mass produced. Coastal Professional Barbeque Grills are all handmade and 100% welded construction. Coastal Professional Barbeque Grills are built heavier than most of the grills being built in the United States today. We build one grill in four different sizes; 20" X 24" - 2' X 3' - 2' X 4' - 3' X 4 1/2' Pull-Behind Pig Cooker.

Absolutely, we personally deliver to North Carolina, Virginia, and South Carolina. For all other areas, we palletize/crate our barbeque grills and freight them to all areas of the country using Old Dominion Transportation Company. If you have a question about freight costs please give us a call or click on the contact us link located at the bottom of every page.

Actually Coastal Professional Barbeque Grills are both. You have the convenience of LP Gas but you also have the option to use a Charcoal Tray. Once started the Coastal Professional Barbeque Grill will achieve 425 Degrees in 4 to 41/2 minutes so you have a gas grill for convenience and when time allows you can use charcoal to grill your favorites. We also can set up all of our barbeque grills to be used with Natural Gas. We also build 100 % all Charcoal Grills as well.

To give you an example, the 2' X 3' Grill is our most popular model for the homeowner. You can grill 12 Whole Chickens at one time or a 50 LB. Whole Hog (less head and feet); the 2' X 4' Grill grills 16 Whole Chickens or a 70 LB. Whole Hog (less head and feet); the 3 X 4 1/2' Pig Cooker will grill up to 26 Whole Chickens or a 150 LB. Whole Hog with room to spare; the 20" X 24" Grill is a standard small size grill where space is a premium.

Electronic ignition has been around a long time; it was invented by Chrysler and used on their cars starting in 1971 or 1972, but didn't hit some automakers until years later (Volkswagen in 1980 - when they already had multiple-point electronic fuel injection!). The system is a computer-controlled way to deliver power to spark plugs without cumbersome and maintenance-heavy breaker points, and with better timing and far higher levels of current.

All homes have a propane gas barbeque grill for your use. Some grills are located on top decks, others at ground level. Local ordinance prohibits the use of grills under the house so please move it to a location free of cover.

You have invested some money in your grill and now you need to protect that investment. One of the first ways that you can accomplish this is to buy a bbq grill cover. This is one item that you will defiantly want purchase but, if you are not sure... Many people would wonder why there are folks who prefer to buy unfinished kitchen cabinets. It just seems to be an awful lot of inconvenience to buy a product that needs you to work on it before you can actually use it.

Answer:The standing pilot system is a self-contained millivolt system. You do not need a 110 power source to operate the fireplace. The pilot model will operate during a power outage. The electronic model will not operate when there is a power outage.

Yes, however you must take proper care and precaution by clearing all flammable material from around it and you must stay with it until it is completely extinguished or turned off.

Mount the electronic ignition module to the breaker plate at position indicated with the screw provided. Loosen the breaker plate screws, rotate the breaker plate fully clockwise, tighten breaker plate screws. Home | Aqua Scooter | Aqua Scooter Parts | Aqua Scooter Service | About Us | FAQ | Policies | Contact Us

The points are replaced by optical pick-ups/triggers which consist of an infra-red lamp and sensor, there could be one, two or three of these pick-ups per lamp set depending on the vehicle. A plastic or metal rotor with a cut out blade is fitted on to the points cam/ATU or replaces the points cam/ignition drive shaft.

Optical trigger(s): The lamp set supplied consists of one, two or three optical triggers connected to a long wire lead to be connected to the switching unit. Mounting for Optical Trigger(s): This will be a new baseplate, segment plate or adapter plate depending on the kit. Rotor(s): In some kits there are several rotors supplied to increase the number of motorcycles that kit will fit. Switching Unit: This will be a single, twin, or triple channel switching unit depending on the motorcycle.

Absolutely. We are insured with at least enough liability insurance to do business with the city of Jacksonville, the schools department, the parks and recreation department, business corporations, and other organizations or association's that require their vendors to be insured and are able to provide proof of liability insurance. Yes we do. We maintain our inflatables everytime they are used. Our inflatables are inspected for worn areas that might cause a safety concern.