If this problem still exists probably the EEPROM of the frame grabber has been overwritten so that the board will have to be send to SILICONSOFTWARE or your distributor. It is possible to send another board to you in change.

First, boot up your computer from the DSL livecd, frugal, or USB-frugal. Note that it is not possible to do a USB install, or any other kind of install from a DSL Embedded system. In the Fluxbox menu, go Apps >> Tools >> Install to USB Pendrive and choose either USB-ZIP emulation or USB-HDD emulation, depending on what is supported by your computer's bios. See similar questions...

The kernel complains that it can't load device drivers for devices you don't have. They're harmless, ignore them. For some reason the nfs service has disappeared from your /etc/services file, NIS map or NIS+ table. You need to have an entry like: If you used your SunOS 4.x services file, that would explain it: SunOS 4.x doesn't have an entry for nfsd in /etc/services, Solaris 2.x requires one. This will usually not happen until you upgrade to Solaris 2.4 or a later revision. Solaris 2. See similar questions...

Windows 2000 and Windows XP provide their own certified drivers for some EMU10kX-based audio cards. Our kX Audio Driver has not been certified by Microsoft (WHQL-ed) and thus a special installation procedure might be required. It is recommended that you first try running kXSetup, and if that fails, follow our Windows XP installation guide. See similar questions...

Our systems come with extra detailed instructions and are easy to install. Most of our customers have successfully installed our systems themselves without any professional help. However, if you really can not or are just afraid to do the job, not a problem; just call on any plumber in your yellow pages and they can install it for you for a small fee. |TOP| See similar questions...

The software is compressed with WinZip, it can be decompressed in windows XP by right click on downloaded file and then click Extract, if you are not using windows XP you must extract the software with winzip software can be downloaded from www.winzip.com See similar questions...

The kX Mixer and kX Setup are statically linked to certain Windows DLLs, which may or may not be found on every system. You can download the required files from the kX Download page if they are not present on your system. See similar questions...

No. The QuikRuler is designed to replace software applications that use the Wintab driver. If you use the QuikRuler with your computer, the computer will treat the QuikRuler data as if you entered it via the keyboard. Software applications that accept keyboard input, such as spreadsheets, can be used with the QuikRuler. See similar questions...

The drivers for the PA820 are pre-installed on the Jornada 560-series. To activate them, open the Programs page and tap on the Stowaway icon. Close the window that explains that the Keyboard is an option, etc and enable the Stowaway Keyboard. That's it, the Stowaway Keyboard is now ready to use. Note: If the drivers are not pre-installed, or need to be reinstalled, you can download the drivers from the Targus website, www.targus.com/support. See similar questions...

For best performance, use Print Manager at the bottom left of the Printers group (should contain an "X"). Insert the supplied printer driver diskette into your computer's A: or B: (3.5) disk drive. If you insert the diskette in a drive other than the A: drive displayed in the Install The ID card printer should now be listed in the Add Unlisted or Updated Printer dialog box. Select the OK button. Your PC's disk drive will now load the printer driver. See similar questions...

Choose type of hardware. midiLink is to be installed as "Sound, Video and Game controllers". Select the proper serial port for your system ("Advanced"-settings usually not necessary. Additional info in the file: README.TXT) See similar questions...

It depends on which software operating system you are using on your computer. Pixera currently supports Windows? 95, 98, Me, NT, 2000 and XP including Mac? OS 9.0-9.2.x Each operating system requires a slightly different approach. You can download detailed installation instructions from the Pixera web site's Support section. Generally speaking, the driver and application software require separate installations, where the driver is always installed first. See similar questions...

It may be that on some manufacturers' computers, the operating system will only take the driver when prompted to do so. In such case you would not insert the software CD first, but let the computer detect the hardware and when requested, insert the software CD for driver installation. See similar questions...

Visit the webpage of your graphic card vendor, download the driver for your specific card and read the provided instructions. Installing the 3D driver on your computer is your business, not mine. See similar questions...

The LAN driver can not be automatically installed. Install it manually by the following steps: Control Panel -> System -> Device Manager -> Ethernet Controller -> Driver -> Search for a suitable device driver, and specify the path "X:\9100-9200\LAN\98SE(or NT4, W2K)". (X is the letter of the CD-ROM (drive). If any error occurs during installation, please input the driver location again.) See similar questions...

My SAINT2 is not showing up in the SAINT Bus Engine 2 or the SAINT2 USB driver is not installed correctly. See similar questions...

Depending on the Operating System you are using, you may need specific access rights to install or use MUSIC PLAYER. Once you see the list of files in the “BIN” folder, double click on the folder named “WIN32”. Once you see the list of files in the “WIN32” folder, double click on the file named “MQSETUP.EXE”. Note: On Windows XP Home Edition system, you need Administrator rights to use MUSIC PLAYER. You cannot use MUSIC PLAYER with User rights. See similar questions...