Your system board will support this new memory if you have the PE desktop model. Please check the parts list to verify which memory speed your system is equipped with. If you have 266MHz memory and wish to upgrade, please ask your store technician to help you upgrade to 333MHz.

SDRAM (single dynamic randomn access memory) is the older style of memory with 2 notches on the stick. The speed of SDRAM is either 100 or 133 MHz (older SDRAM was 66 MHZ - do not mix with pc133 memory !) DDR (double dynamic rate) memory has only 1 notch. The DDR memory will read twice (double) as much information as the SDRAM - the speed of DDR is from 266 to 400 MHz

Actually, there's no such thing as dual-channel DDR memory. There are, however, dual-channel platforms. If you have a dual-channel platform, simply purchase your DDR memory in pairs. However, be very careful to order two modules with the exact same specifications; the modules must be identical to each other to perform correctly.

First, disconnect the AC power by unplugging your power adapter. Turn over the laptop and remove the battery. Locate and remove the memory panel. Insert the memory module into the open socket, and replace the memory panel. NOTE: You should verify that your notebook has an open memory socket available (some models may not). If no open socket is available, please contact Best Buy technical support and service.

Yes, there will be a new Jinitiator. It will install automatically when you log onto the system following the upgrade. In some cases, an LSP will load the Jinitiator for you in advance of the upgrade. The old and new versions can co-exist.

Day Delegate Rate. This is the cost per person in hiring the conference room. Day Delegate Rates normally come as a package typically including room hire, teas/coffees and lunch. DDR packages will vary from operator to operator and package to package.

No, you can't. DDR memory is not backwards compatible. And you most likely can't use EDO. The bx chipset indeed has support for EDO memory, but most boards don't (an exception to that are the bx based boards from supermicro). If you really happen to have a board which has support for EDO modules (check your manual) you can't mix EDO rams with PC66/100/133 sdrams, and you can only run at 66mhz FSB (that is, you'd have to use a P2 up to 333mhz or a Celeron up to 766mhz).

No, DDR2 DIMM memory modules are not backwards compatible with DDR DIMM, due to incompatible pin configurations, core voltage, and memory chip technology. DDR2 modules are designed with a different "key" in the edge connector to prevent insertion into incompatible memory sockets such as DDR motherboard. A DDR2 SDRAM DIMM will not fit into a standard SDRAM DIMM socket or a DDR DIMM socket. DDR2 modules use a 1.8V power supply, providing a big power saving over the 2.5V DDR modules.

A full detail explanation and product guidelines for memory modules and DDR applications can be found in our Applications section under Memory Modules.

Please contact us if you really want to do it. Our fees are: €100 for the script update (with a new clean database and a default template). Additional €100 for the database update (which saves all user and admin data and all the settings from the old version). The "tpl" (template) folder will be new after the script version change, so if you made any changes to the script before, you'll have to make them again for the new script version.

When you're "selecting" a memory card on the Memory cards tab in the Configuration window, just type in the name of the new memory card file, and press OK, and pSX will automatically create the memory card file. Although many games will be able to format the memory card if it detects that it is unformatted, some don't. Because of this, you should start pSX with the memory card loaded, but without any game loaded.

Important Note: Your humble authors got tired of writing dry formal technical prose in the rest of this document, and succumbed to the temptation to try to be funny in parts of this appendix. Sarcasm abounds here. Please do not take any of this personally! The humor-impaired should interpret my comments not as attacks on them, but as an attempt to make fun of myself for being impatient with you, my devoted and valued, if sometimes demanding, users.

Consult your user/owner's manual for details about the original memory configuration and capacity. If you've misplaced the manual, you may be able to contact the retailer where you bought the PC from. If you have a hand-me-down PC or inherited a pre-owned PC, you probably may not have the user manual or know any detail of the original memory configuration or the memory configuration may have been changed.

Ans: To answer this question you really have to break down how it is that companies "certify" or "match" Dual Channel memory modules. What is Matched or Certified Dual Channel Memory? Companies like Corsair, OCZ, and Mushkin produce what they call "dual channel" memory, or Dual Channel Kits. These are sold in pairs, so for instance you might buy a 512MB or 2x256MB Dual Channel Kit, which consists of 2 sticks 256MB DDR memory paired together by the manufacturer.

No. You do not need new software to upgrade. However, once you upgrade you will be offered additional software to download to optimize the enhanced features of SBC Yahoo! DSL.

With your @metro enabled handset you will be able to select, purchase, and download a variety of games, ringtones, entertainment options and productivity programs - on the go - directly to your handset. No cables required. No time wasted connecting to a computer or browsing the Web. With data, you can personalize your MetroPCS phone with the applications and information services YOU want and need - anytime, anywhere.

There are several signs indicating it may be time to upgrade your memory. If you see your mouse pointer turn into an hourglass for significant periods of time, if you hear your hard drive working, or if your computer seems to work more slowly than you expect, the reason is probably insufficient memory. When physical memory is insufficient, the system uses Hard Disk Space as memory. This is called "Virtual Memory".

Make sure the cable from the case's power switch is connected properly to the board's power on jumper; refer to the motherboard manual.