Yes. Our technician will install your DSL service on one system to verify that the service is working correctly. One additional computer can be configured, parts not included, at no additional cost. Each additional system can be configured at a special discounted rate. Please contact us for more information.

Getwireless.net will install a single Ethernet cable inside your home. If you have more than one computer, you will need to purchase your own wireless router. A router acts as a splitter, allowing up to four computers to be plugged in directly, and it also wirelessly sends your Internet signal throughout your home to any computer or laptop with a wireless card. An 802.11g wireless router typically runs under $50, and can be purchase from any computer or office supply store.

In Route mode, the MM2211 can allow multiple PCs to connect. Since the MM2211 only has a single Ethernet port, the user should connect a hub or a switch behind the MM2211 to accommodate multiple PCs.

Yes, AB Tutor Control uses the TCP/IP protocol which is the networking standard of the Internet. In order to connect to another machine, you need to know its IP address. An IP address is a unique number that identifies the machine on the Internet. You need to add this IP address into the Tutor Control program (See Tools - Configuration - Network). The performance will vary depending on the amount of networking bandwidth you have.

First the router needs to be upgraded to the latest firmware level. The manufacture web site will contain this information as well as information on how to install the firmware. The computers need to be running the latest version of SecuRemote. That version is SecuRemote NG AI. It can be downloaded from the ASU Security web site.

All computers have connection set up using an 0845 number. Such a connection is intended for light use as the charge (1p per minute off-peak) can mount up. Should you wish to connect for long periods, the installed connection will let you browse the internet and find another connection package that suits you.

Yes. You can connect multiple computers in your home to the same high-speed connection. However, if you need a separate IP address for the additional computers, then you will need to pay an extra fee in most cases. You can learn more about setting up a network in your home by talking to your service provider. Broadband Summary ? Glossary ? FAQ ? Order Retrieval ? Privacy ? Disclaimer ? Intel Home ? Terms of Use

If you are using the multi-user service, you can connect up to 29 hosts to your DSL router with one or more Ethernet hubs. When using an Ethernet hub, you will need to connect one port to the DSL router; the other ports can each be used to connect to a PC. If you are using the single-user service, you will only be able to connect one PC directly to the ADSL modem/bridge.

Yes. An individual account's connection can be shared among multiple computers in that household. Of course, sharing your services with others outside of your household is not allowed.

There are Ethernet ports in each room and these remain active during the summer. However, due to a varying maintenance schedule, Internet connections are not guaranteed during your stay. The connections in your rooms, should they be active, are available for use by summer conference guests at no charge. Please let our office know if you would like to store your luggage and we will make arrangements for this service.

In order for your computers to connect to the campus network, they must have an Ethernet interface. Modems cannot dial-in to the Stanford University Network from the residences, so they are not a substitute for Ethernet capability (although technically you could dial-up to an external Internet service provider). If your computers have built-in Ethernet with a standard RJ45 connector (as do all Macs and most PCs), you won't need any additional hardware.

I am connected to MegaQuebec Internet and I get the following error message: The DNS server cannot find the address.

Of course. Just connect them together using Windows Networking, a network card in each computer and each computer can access the Internet for the same price. You can also connect this into your existing network. Actually it is very easy to share the satellite connection across your local area network. With DW4000 you won't be able to use a hardware router like you might use for a cable modem or dsl modem.

Yes, your AT&T PrePaid Internet account is transferable from computer to computer. You must install your AT&T PrePaid Internet software from the CD on each computer you want to use. However, when accessing the Internet, you can only be logged on to one computer at a time. A PC with a Pentium (or equivalent) 166 MHz processor or faster Windows 95, 98, Me, 2000, NT 4 (SP 5+) and XP.

You will only be assigned a single IP address. However, you can still use proxy software such as Wingate or ISA to share your connection with multiple users. This requires special setup, but Terranet highly discourages you from doing that as it will substantially degrade your service. The service is designed to be used on a single computer only. Some weather conditions affect the service, such as wind blowing the dish off target, water soaking connectors or service outages.

Yes. You may use the Sandboxie software on any number of computers that you, as an individual, own. This does not apply to commercial use. See the End User License Agreement for more information.