The firmware version can be found on the USB Serial Ports Advanced Options tab of the device manager.

Most writing software has an option for showing CD recorder information, which will include the firmware version. Check the firmware version using your writing software, which will have an option for CD recorder information, including the firmware version. Or you can also check it using the RFlash/Firmware Flash Utility program for uploading the firmware.

If you want to know the current version installed on the player you have to do the following operations: All the internal version numbers are now displayed on TV (and the one corresponding to the version is the 4th one).

The current version of firmware is 2.2.6. Firmware is FLASH upgradable. A reprogramming tool, cable, and software are required to upgrade the flash. The upgrade tool kit is available for $295 from DLI. Mail-in factory firmware upgrades are $59.+ S&H Entering commas at the beginning of the modem command string will be interreted as a 2.5 second delay. Fixed a situation with some older browsers getting an error when presented with the security lockout page.

However the label3d and stereo3d scripts in 2.7b are incompatible with versions of ImageMagick and libtiff found in some older linux distributions. If you run into this problem, try version 2.6e

If you are still within the upgrade and support period of the product then you simply download the new version that you require and use the same license key. CWMail and DMailWeb both come with support and updates free for 12 months. If you are unsure whether you still qualify, you should contact sales at netwin@netwinsite.com , preferably with your product license number (supplied in the same email as your license key, e.g. DMWxxxx), and they will be able to verify it for you.

of this writing (FAQ version 0.6 of 01/06/2000 ) the latest released version is 2.006 . The latest versions should always be available from a CPAN mirror site near you (see above for info on where to get PDL). The most current version of PDL can be obtained from the CVS repository see ''CVS availability of PDL'' below.

The current version of CVSS is version 2. It was finalized and released to the public in June 2007. This FAQ addresses CVSS version 2 only, although there are many similarities between versions 1 and 2. Information on CVSS version 1 is available from the NIAC Paper on CVSS at http://www.first.org/cvss/cvss-dhs-12-02-04.pdf.

The current version of Bolo is 0.99.7. Because the various versions are not compatible with each other, if you are using an older version, you should download the new version immediately from our web archive or FTP archive.

The current development version is called Gutsy Gibbon, which will become Ubuntu 7.10. It is due to be released in October 2007.

Check the AQPP web page for information on the latest version of RADIUS. The What’s New section will provide information on upcoming versions.

A special employee, technician, bingo centre employee or gaming industry employee’s licence is valid for ten years from the date of issue, unless it is cancelled or surrendered prior to the date. If your licence was issued prior to 2001, and was issued for three years, telephone the Employee Licensing Section on 03 9651 3054 to confirm that your licence is current. From 25 June 2005, your current licence is taken to be a gaming industry employee’s licence.

You just have to press the "SETUP" key on remote control. Then just watch the top menu bar (right part).

The latest software for the PORTADISC MDP 500 is version 1.50. The version is shown briefly after power up on the MDP’s boot-up page. If your MDP contains a version other than v1.50, contact your dealer for instructions on getting your MDP updated to the current release.

Login the router, click "Status" at the top corner, then check "Runtime Code Version". The runtime code version is the firmware version.

Please take out the battery and find a serial No. in the Clip, LXXXXXXXX, and please send us a email (service@fortuna.com.tw) for us to check if your Clip-on is with 2.02 firmware version. If your Clip-on is not the Xtrac 2.02 version and you want to upgrade your firmware, we let our dealers deal with the firmware upgrade for our Clip-on GPS receiver, so please contact your dealer to upgrade the latest firmware version.

Please note you have to use Fortuna made USB cable to update the firmware and when you use the cable, it is better to take out the batteries. Please find the firmware upgrade instruction from the GPSmart download page.

The firmware version can be obtained on the Information - System page. It is listed as "S/W version".

Unless you have hardware affected by a fix (esp. specific 256MB Sandisk cards on Meridan) or you have DirectRoute, my personal advice is to remain on the lowest number above 4.06 that works with your hardware and mapping programs. Some folks on the list are happy with the newer versions, so it's up to you to decide.

contains various bugfixes, but also was released with a couple of known problems. See the release notes for details.