Most writing software has an option for showing CD recorder information, which will include the firmware version. Check the firmware version using your writing software, which will have an option for CD recorder information, including the firmware version. Or you can also check it using the RFlash/Firmware Flash Utility program for uploading the firmware.

The firmware version can be found on the USB Serial Ports Advanced Options tab of the device manager.

If you want to know the current version installed on the player you have to do the following operations: All the internal version numbers are now displayed on TV (and the one corresponding to the version is the 4th one).

Login the router, click "Status" at the top corner, then check "Runtime Code Version". The runtime code version is the firmware version.

The current version of firmware is 2.2.6. Firmware is FLASH upgradable. A reprogramming tool, cable, and software are required to upgrade the flash. The upgrade tool kit is available for $295 from DLI. Mail-in factory firmware upgrades are $59.+ S&H Entering commas at the beginning of the modem command string will be interreted as a 2.5 second delay. Fixed a situation with some older browsers getting an error when presented with the security lockout page.

This is how you can check your Firmware version number. Press Menu and go to the setup menu (blue wrench on the left). Go in, and then select screen #1. Hold down the center OK button on the 4-way switch and at the same time press the Info button (i+) at the top. This will display a little dialog with the primary version of the firmware. While that screen is visible again press the AEL button and the Info button together.

However the label3d and stereo3d scripts in 2.7b are incompatible with versions of ImageMagick and libtiff found in some older linux distributions. If you run into this problem, try version 2.6e

The latest software version (Menu->Technical Information->Manufacturer Information) is either Software Version v1.15.01 U or Software Version v1.15.01 Z

Power ON your phone and type *>*<<*<* and go to Service Info Menu and go to SW Information Menu and Press OK. (< Joystick-left , > Joystick-right, * Asterisk Key)

Choose "My Computer"---"Control Panel"---"System"---"Device Manager"--- "CDROM"---"XXXxxxx"---"Settings"

Currently, no "first" or "second generation" drives have been shipped with the new firmware version factory installed. Therefore, it is highly unlikely that your drive will already be equiped with this new version. However, the firmware installation utilitity will check and display you current firmware version, and will notify you when your firmware is already up-to-date.

of this writing (FAQ version 0.6 of 01/06/2000 ) the latest released version is 2.006 . The latest versions should always be available from a CPAN mirror site near you (see above for info on where to get PDL). The most current version of PDL can be obtained from the CVS repository see ''CVS availability of PDL'' below.

The current version of CVSS is version 2. It was finalized and released to the public in June 2007. This FAQ addresses CVSS version 2 only, although there are many similarities between versions 1 and 2. Information on CVSS version 1 is available from the NIAC Paper on CVSS at http://www.first.org/cvss/cvss-dhs-12-02-04.pdf.

The current version of Bolo is 0.99.7. Because the various versions are not compatible with each other, if you are using an older version, you should download the new version immediately from our web archive or FTP archive.

The current development version is called Gutsy Gibbon, which will become Ubuntu 7.10. It is due to be released in October 2007.

Check the AQPP web page for information on the latest version of RADIUS. The What’s New section will provide information on upcoming versions.

In order to make sure that your system has been installed from the real Debian base disks check for the existence of /etc/debian_version file, which contains a single one-line entry giving the version number of the release, as defined by the package base-files.

You just have to press the "SETUP" key on remote control. Then just watch the top menu bar (right part).

The latest software for the PORTADISC MDP 500 is version 1.50. The version is shown briefly after power up on the MDP’s boot-up page. If your MDP contains a version other than v1.50, contact your dealer for instructions on getting your MDP updated to the current release.

Please take out the battery and find a serial No. in the Clip, LXXXXXXXX, and please send us a email (service@fortuna.com.tw) for us to check if your Clip-on is with 2.02 firmware version. If your Clip-on is not the Xtrac 2.02 version and you want to upgrade your firmware, we let our dealers deal with the firmware upgrade for our Clip-on GPS receiver, so please contact your dealer to upgrade the latest firmware version.