It takes less than a week to install the system. The system starts running in production mode in less than half a month.

SentryAccess can be deployed in a matter of hours. Our solution consists of three software components: the SentryAccess Agent, SentryAccess Server, and SentryAccess Manager. SentryAccess Agent software should be installed on the same machines as your Web server software. SentryAccess Server software should be installed on a machine capable of connecting to your user and policy database(s).

MIRUS can deploy these solutions in a minimal amount of time throughout your restaurants and at your regional or corporate offices because they are already built and tested with live customers in real environments. You avoid the internal development time, budget and headaches and more quickly realize the benefit of these applications. Typical implementations are at 30-90 days.

Frontal Airbag deployment takes approximately 30-55 milliseconds. It takes 100 milliseconds, or 1/10 of a second, to blink an eye. Side impact Airbags typically deploy even faster. Deflation begins immediately after the frontal Airbag has been fully deployed. Some side Airbags remain inflated longer to help protect occupants in the event of a rollover.

Simply lay the parachute out behind the airframe and start the engine. As the pilot and aircraft start rolling forward for takeoff, the parachute will kite overhead. Upon reaching flying speed, the parachute will lift the pilot and aircraft up into the sky.

The Sparklit Survey Appliance is designed to get up and running very quickly. Generally setup consists of simply plugging it in.

Cranial Release Technique takes only minutes to perform and requires no special diagnostic equipment or tables. CRT is gentle and very easily tolerated by patients and clients. It is also very easy on the practitioner. Your everyday physical demands in the office will be reduced considerably after incorporating CRT, leaving more time and energy for family and other interests.

Much depends on the model. Some can be assembled in about 10 to 15 minutes once you get the hang of it. Others can take a half hour or more. For the record, the fastest assembly of a folding kayak, a double Klepper, is a little over 4 minutes starting from the parts being in their bags. It should be noted that you don’t have to assemble and disassemble a folding kayak around each outing. They can be left assembled for years if you have a place to store them that way.

The system is easy to install and takes approximately one hour to an hour and a half, depending on the persons expertise....Each processor is pre-set in the factory for both water and air injection and is bench-tested to be free of defects. Any tampering to the unit will automatically void the Guarantees other than the air adjustment. The first step for installation is to locate a place for the water tank with a good supporting area away from direct heat such as exhaust manifold.

Aging can be done with a higher degree of accuracy until the horse is about 15 years old. Keep in mind that differences in breed, feed types, and vices (such as cribbing) can make individuals look older or younger than they actually are.

It is not difficult at all. It is a simple process that once you get the hang of seems ridiculously easy. Typically it takes 10 to 15 minutes the first time you do it. When you master the process it usually only takes a few minutes to do the refill. It saves you a trip to the mall to buy a new cartridge, and can actually be quite satisfying to you know you are saving so much money!

The installation is quite easy, involving staking a wire down to the perimeter of your lawn. Complete instructions are included in the owner's manual. In addition a small ruler is included to help guide you in the installation. The average installation will take approximately 1 to 1.5 hours.

Building a 7 is straightforward and, providing you have some basic mechanical knowledge, requires no special skills. The time taken to complete the car depends on many factors such as specification chosen and the space available to unpack the parts, but 70 to 90 man-hours is typical. The chassis is supplied fully panelled and with safety critical items pre-installed at the factory, such as brake lines, loom, seatbelt mountings and instruments.

Folding Block barriers have been designed specifically to be easy to transport, install, and re-locate. It can be installed in less than one day (typically 4-6 hours) onto any traffic-bearing surface or roadway (most commonly bitumen or concrete) using standard tools, and simple instructions. The usual anchoring method to bitumen or virgin ground requires a steel ‘ground anchor’ to be installed within a sound footing – usually one cubic metre of concrete.

Approximately two to four hours. The conversion is not difficult and is designed for a handy man. It does require the use of several tools. (screwdriver, drill, square, hammer, hacksaw, pliers, x-acto knife and wire cutters).

Lightness should last from one to five years, depending on your personal habits such as smoking and drinking coffee and tea. At this point you may choose to get a touch up. This procedure may not be as costly because you can probably still use the same mouthguard. The retreatment time also is much shorter than the original treatment time.