That's a matter of personal preference. Both work well. The glossy finish will be a little sharper; the matte finish will be a little softer. Bear in mind that laminating will add some gloss to the finished product. There are two types of coaster holders. The lucite holders are made to fit each of the four sizes of coasters. The sides of these holders can be of varying heights to accommodate four, five, six or seven coasters.

When you create your card(s), you can select glossy or matte finish. (The glossy finish adds a UV protective coating.) If you are ordering a box of cards, your choice of glossy or matte will be applied to the entire set of cards. You can, however, have sets of cards with different finishes in the same order.

Yes. If the cd or dvd media has a glossy white inkjet printable top, it will be specified in the product title and description. You can also go to here to find our entire selection.

For Photo Announcements printed on Fujicolor Crystal Archive Photo Paper, we can provide either. If you do not indicate a preference, it will automatically be printed on matte photo paper. The Oversize Photo Cards and Mini Photo Cards can be printed with a satin matte finish, or a glossy ultraviolet coating. If you do not indicate a preference, they will be printed with a satin matte finish. Photo Note Cards can be printed with a matte or a linen finish.

Color laser printers produce a vivid, natural sheen image on quality paper (both matte & glossy). However, the glossy has a distinct shine even where the label remains white. It's usually a matter of personal preference as to which will work for your chips. However, glossy is recommended for actual photos or intricately detailed designs with multiple colors.

Gloss paper is shiny and reflective, reproducing photography in a brighter, snappier way, while matte paper is much more dull and flat. Matte is generally recommended for applications and mailers. Gloss paper is best used for brochures and flyers. (back)

A glossy finish will have a much more shiny finish. The matte finish will not be as shiny. The resolution of the photos is the same for both options.

Some people prefer matte because it’s less reflective - so there’s less glare - and because fingerprints tend to show up better on glossy surfaces. Other people prefer glossy since the lack of texture can make the image look a bit sharper. Many others prefer pearl or semi-matte surfaces as a compromise between the two.

Most woodstains and varnishes are relatively thin and over time the flatting agents may settle out into fairly solid layers on the bottom of the can. Applying an incompletely stirred mid sheen product often results in a high gloss coating on the timber as a large proportion of the flatting agents are left at the base of the container. To achieve the specified sheen level all of these flatting agents must be distributed evenly throughout the can.

OC Eight, although designed to control excess facial shine, can be used by anyone to create a great matte finish and beautifully clear skin. Because OC Eight will not chemically dry your skin, OC Eight works where you need it to — not where you don't.

Yes, a matte finish can be applied on top of the last coating. It should be applied thinly as otherwise the matte effect will not come out. It is not recommended for decks or floorboards as it is more slippery than the gloss finish. This is due to the microscopic sized glass particles which create the overall matte effect.

We use a matte varnish on match boxes and books, sewing kit booklets, and toothpick box and booklets with full coverage on the printing surface. This dulls the gloss from the inks. The charge is the same as a 2-color charge. Matte varnish may affect the shade of ink colors very slightly. Since the varnish is overprinted as a final application, it is not possible to exactly predict the final color tone.

Answer: The large scanner and matte/glossy plotter require several important tasks to operate correctly and avoid any damage to either the machine or the work you are trying to scan/plot. A CADGIS employee must log on to either of these computers and assist in the scanning/plotting job. The solution: Simply ask someone working behind the desk if they can help you scan or plot your work (However, at certain times there may not be a qualified employee on duty.

Yes you can choose either gloss or matte for your photo finish when you Checkout. Most folks usually pick the traditional gloss finish, but the matte finish also looks great and doesn't collect fingerprints quite as quickly.

The clear matte finish is a polyurathane product that is applied after the project is complete and the paint is dry. This is an optional step that protects against scratching, etc. It's not shiny, so you can't tell by looking at your brick that it's there.

A thin water based acrylic wax is the key to preserving the new look of indoor decorative concrete. Depending on the amount of foot traffic, once or twice a year is enough for most residential applications. For those desiring higher sheens, or those having large pets and other floor intense situations, you may want to max three or four times a year. Our wax products can be applied with a sponge mop in thin coats to create a sacrificial barrier and preserve the seal coat and color appearance.

The clear matte finish is not included in the kit and needs to be ordered separately. The cost is $24.95.

A: A matte finish is a bead blast finish on tubing exterior only. The surface has a uniform dull appearance. Most fittings are constructed with a matte finish. An electropolished finish removes a small portion of the surface of the vacuum tubing, usually both inside and out, which results in a surface that traps less water vapor than an unpolished surface. In most high vacuum and many ultrahigh vacuum applications, a matte finish is acceptable.

All races share the same finish in beautiful Chumash Park. Look for the large red arch. All races finish on the grass. For spectators, the last tenth of a mile is highly visible from many locations in the park.

The silver KoolSink® has a clear anodized finish and the 13" Black KoolSink is black anodized..