The AC adapter is plugged into an AC outlet you know has power (don't laugh, I'm guilty of this one myself). Both ends of the cable from your computer to the speakers is pushed in all the way (subwoofer and computer). The cable going to your computer's sound card is plugged into the speaker out plug (not the line out, line in, digital in or out, or microphone plug). With sound cards capable of feeding more than two speakers, make sure the speaker plug you choose is for the front speakers.

If you can't hear sound from your speakers, it means the speakers are not connected properly, the sound card isn't setup correctly, or the speakers could be defective. First, check the speaker-to-computer connections. Make sure the cable connected to the "Audio In" jack on the speakers is also connected to the "Speaker Out" or "Line Out" jack on the sound card. You can test the sound card jack by connecting headphones to it.

The test mode is activated by holding the RADIO button and turning on power. The head unit now enters a test mode sending audio to the amplifier in the following repeating sequence: The head unit continues to function as normal, except for this sequencing of the audio outputs. Turning off the head unit will leave the test mode.

If you can't hear sound from your speakers, it means the speakers are not connected properly, the sound card isn't setup correctly, or the speakers could be defective. First, check the speaker-to-computer connections. Make sure the cable connected to the "Audio In" jack on the speakers is also connected to the "Speaker Out" or "Line Out" jack on the sound card. You can test the sound card jack by connecting headphones to it.

No, The carpet covering we use is Acoustically Transparent and will not muffle the sound of a good quality pair of speakers, you may find a slight reduction in very high frequency's that you most probably wouldn't hear anyway.

No problem! As you can see below, we run an animated caption across the bottom of the browser of what the my Virtual Sales person™ is saying.

You can bring your own "home stereo" equipment (you may not exceed the electricity limit). Read more at the Rules page section "Music Loudness".

The squeak is coming from the rubber bumpstops where the hood rests on. Find the side that is squeaking and give it a 1/2 turn and a dab of grease on top of the rubber bump stop.

The ticking sound is normal. The ticking sound is mechanical resonance within the magnetic components caused by the anti-islanding mechanism with the PV Powered inverter family.

A small amount of buzzing is normal and comes from the transformer in the inverter. If the sound is very loud and bothersome, call PV Powered Technical Support at 1-877-312-3832 Opt. 2 for assistance.

The best way to change the sound of your speakers is to change where you put them. Ideally, the speakers should be located at ear level, in front of you, squared off between you. It's then a matter of fiddling with: Other than that, speaker modifications can be a can of worms, or can produce very subtle changes, which you might prefer. For example, you might improve a speaker by adding some cross braces of 1"x1" wood from left to right and from front to back.

When you can only hear sound from the front speakers, it usually means the sound card does not support surround sound, and/or the sound card is not configured correctly, the speakers are connected incorrectly or the speakers could be defective. First, make sure your sound card supports surround sound 4.1. A surround sound card should have a front and rear speaker jack.

The sizes and impedances of the speakers are rather unusual. The amplifier may not like, or may not perform the way it should, if speakers of different impedances are used instead of the standard speakers. The information the tables below were taken from the 95 workshop manual for model year 1999. The sum of all amplifier powers does not add up to the marketing power numbers.

This is only possible with the optional mr Handsfree Blue Mute cable. Thanks to this professional built-in solution, your conversation is carried over the car speakers. This optional cable can be purchased via our online shop. The microphone might be disconnected. Please check the connection of the microphone to the carkit. If the microphone is not disconnected, press the button of the microphone down and make sure that the Genius main unit is put correctly into the holder.

We feature a state-of-the-art theatre sound system, which broadcasts to your car in FM STEREO. Use your car's FM radio (set your ignition to the accessory position). Nearly all portable FM radios work very well at the drive-in, and you're welcome to bring them along.

Flat panel speakers and conventional speakers make sound in totally different ways. Conventional speakers have a cone, which moves backwards and forwards displacing the air directly towards the listening position. Effectively, they are very directional in nature, producing a pronounced ‘sweet’ spot or focal point for the sound. Flat panels make sound by electrically stimulating the surface of a rigid board in the same way that a tuning fork excites the surface of a table.

new question pools become available, we integrate them into our course. When questions are occasionally removed from the question pools, we update our course to reflect those changes. We keep adding features to the software, like practice exams that focus on your weak areas or on the most-often-missed questions. usage has expanded, we have upgraded our server four times to keep pace. In November, 2006, we moved to a dedicated, 64-bit, 3.4 GHz dual Xeon server with 4GB RAM.

Your speakers' sound has been switched to connect with TalkPro. Re-set your sound card to your default system sound card. Visit our Technical Support page for instructions.