QueryCAT Logo
Search 5,000,000+ questions and answers.

Frequently Asked Questions

Where does fly ash come from?

Boral Material Technologies, Inc.
Fly ash is produced through the combustion of coal used to generate electricity. After coal is pulverized, it enters a boiler where flame temperatures reach up to 1500 degrees Celsius. Upon cooling, the inorganic matter transforms from a vapor state to a liquid and solid state. During this process individual, spherical particles are formed. This is fly ash. It is then collected by either using electrostatic precipitators, baghouses or a combination of both.

Why does concrete made with fly ash last longer?

Boral Material Technologies, Inc.
By reacting with free lime to form additional binder material, the permeability of concrete made with fly ash is lower than that made without it. Since virtually all durability aspects of concrete are improved with a reduction in permeability, the use of fly ash improves concrete durability. In addition, concrete water demand is typically reduced when using fly ash, leading to a lower water/cementitious ratio thus increasing strength. See similar questions...

What is Fly Ash?

Axim Concrete Frequently Asked Questions
Fly Ash is a pozzolan. A pozzolan is a siliceous and/ or siliceous and aluminous material which in itself is not cementitious but will, in the presence of moisture and temperature > 40°F (> 5C), combine with calcium hydroxide to form cementitious compounds. The major use of fly ash is as a partial replacement for cement in concrete. The amount of cement replaced depends on the fly ash type, the fly ash quality, the application and the atmospheric conditions. See similar questions...

How does the use of fly ash help the environment?

Boral Material Technologies, Inc.
The use of fly ash in concrete improves the environment in a variety of ways. By using fly ash as a partial replacement for portland cement, the production of carbon dioxide emissions is reduced. Every ton of portland cement produced creates approximately one ton of carbon dioxide emissions. Therefore, the use of 20 percent fly ash in a structure containing 500 cubic yards of concrete would reduce CO2 emissions by approximately 25 tons. See similar questions...

How much fly ash should be put into concrete?

Boral Material Technologies, Inc.
Typically, concrete designers use fly ash a partial replacement for portland cement at values up to 30 percent of the total cementitious composition. The use of high percentages (high volumes) of fly ash in concrete have been studied extensively over the last 15 years and the benefits have been well documented. See similar questions...

Is fly ash safe to use?

Boral Material Technologies, Inc.
Fly ash is classified by the EPA as a non-hazardous product. As indicated by the MSDS, it is a relatively inert material. Fly ash is a product of coal combustion thus possesses no significant risk of fire or explosion. Fly ash is similar to sand in composition and consistency. When transporting and handling fly ash, the recommended precautions for safe handling as outlined on the product MSDS should be followed. See similar questions...

Question: What is fly ash?

Century Cement- F.A.Q.
Answer: Fly ash is a by-product from coal fired electric power generating plants The inorganic or inderal constituents of the coal, such as clay, quartz and shale, fuse and chemically recombine during burning to produce various crystalline and glassyphases of fly ash. The fly ash is entrained in the flue gas and cools into spherical, usually hollow shaped particles. See similar questions...

Will any of Ash's Pokemon ever come back?

PokeZam.com - FAQ
Well Charizard returned to help Ash in Pokemon 3: The Movie. I know Butterfree isn't going to come back for sure because in the Japanese version of the show, they said that Butterfree fly over the ocean to die. Regarding the rest of Ash's Pokemon, your guess is as good as mine, but I think that it would make sense for him to meet up with some of them again. See similar questions...

What are the effects of fly ash on air entrainment?

Boral Material Technologies, Inc.
The impact of fly ash on air entraining admixture (AEA) is primarily due to the carbon, represented as loss-on-ignition (LOI), remaining in the fly ash after combustion of the coal fuel. Due to the high rate of absorption of surfactants such as air entrainment into carbon, the loss-on-ignition generally has a positive correlation with AEA dosage demand. See similar questions...

Can fly ash be used for soil stabilization?

Boral Material Technologies, Inc.
Fly ash, particularly Class C, can effectively be used to stabilize soil for various types of construction. High calcium fly ash (Class C) acts as a good source of calcium hydroxide which "self activates", reacting with silica and alumina in the fly ash and soil to form a cementitious hydration product. In addition, C3A in fly ash (Class C) can react with sulfates to gain strength relatively quickly. See similar questions...

Where did this Emerald Ash Borer come from?

FAQ, Emerald Ash Borer, Department of Public Works, City of ...
this point no one knows specifically how it arrived in Michigan. It is an exotic pest species. The natural range of Agrilus planipennis, or the Emerald Ash Borer, is eastern Russia, Northern China, Japan, and Korea. See similar questions...

What is the difference between Class C and Class F fly ash?

Boral Material Technologies, Inc.
The primary difference between Class C and Class F fly ash is the chemical composition of the ash itself. While Class F fly ash is highly pozzolanic, meaning that it reacts with excess lime generated in the hydration of portland cement, Class C fly ash is pozzolanic and also can be self cementing. ASTM C618 requires that Class F fly ash contain at least 70% pozzolanic compounds (silica oxide, alumina oxide, and iron oxide), while Class C fly ashes have between 50% and 70% of these compounds. See similar questions...

How do you include fly ash in a "concrete mix design"?

Boral Material Technologies, Inc.
For mix design purposes, fly ash itself should be considered like portland cement, except that the specific gravity for fly ash is different. The specific gravity of portland cement is typically 3.15, while the specific gravity of fly ash may range from 2.2 to 2.8, depending on fly ash composition. Therefore, if a certain percentage of cement is replaced with fly ash on a mass basis, simply multiply the initial portland cement quantity by the percent replacement. See similar questions...

Question: Addition of fly ash in concrete is detrimental to its strength?

Century Cement- F.A.Q.
Answer: This is not true. In-fact the advantages of addition of fly ash are many, a few of which are listed below: See similar questions...

Is fly ash used in SafeCrete AAC production?

SafeCrete.com - AAC Internet Sales / AAC Products / AAC Info...
Sometimes. The primary ingredient in the chemical reaction needed for autoclaved aerated concrete production is silica. The silica and other raw materials combine to form Tobermorite, a manmade version of a naturally occurring mineral. This gives AAC its unique strength-producing crystalline structure. Silica is found in many sources, such as sand, copper mine tailings, volcanic ash, and fly ash. See similar questions...

Where does the name come from?

Internet Archive Frequently Asked Questions
The Wayback Machine is named in reference to the famous Mr. Peabody's WABAC (pronounced way-back) machine from the Rocky and Bullwinkle cartoon show. See similar questions...

Where is ASH headquartered? How many employees does ASH have?

Guest Frequently Asked Questions
ASH is located in downtown San Diego. The company employs almost 600 people in its corporate office and has satellite offices in California, Arizona, Colorado, Florida, Georgia, Illinois, Maryland, Massachusetts, Minnesota, New Jersey, Ohio, Oregon, Pennsylvania, Texas, Washington, and Washington, DC. See similar questions...

What services does ASH provide?

Guest Frequently Asked Questions
Through its subsidiaries, ASH provides specialty benefits for physical medicine, complementary health care, wellness, and disease management for obesity programs nationwide. Benefit programs include chiropractic, physical therapy, occupational therapy, acupuncture, massage therapy, dietetic counseling, naturopathy, vitamins and minerals, fitness clubs, and exercise centers. See similar questions...

D. How does a student go about learning to fly?

FAQ's
The USHGA certifies hang gliding instructors and schools. All students should learn from a certified instructor. Lists of certified schools can be obtained from the USHGA at (719) 632-8300, or on this web page. The time required for training varies considerably with the student's innate skills and with the type of training conditions. See similar questions...

Explore Other Topics

My home has a forced air furnace but no air conditioner. Can I add central air?
What's the best way to bait?
Do I have to apply a course through the UCAS system?
What size of gas logs can I install into my Heatilator or Heat-N-Glo wood burning fireplace?
Why does my notebook shut down when the battery has a charge?
What is the difference between an "indictment" and an "information"?
What file format is compact disc?
How do I change the BIOS boot order so that My PC will boot from a CDROM or a floppy disk?
What is the difference between digital and analog signals for speakers?
Why do I see silver on the penny after it is elongated?
HOW CAN I RECORD A FREEVIEW DIGITAL CHANNEL & WATCH A DIFFERENT FREEVIEW DIGITAL CHANNEL?
More Questions >>

© Copyright 2007-2012 QueryCAT
About • Webmasters • Contact