ACE's security film is much thicker than window tint. In addition, security film also uses a pressure sensitive adhesive that forms a physical bond with glass. The combination of increased thickness and aggressive adhesive greatly increases the film's ability to absorb the energy of an impact and keep the glass intact.

ACE security film is five times thicker than most window tint. In addition, ACE security film also uses a pressure sensitive adhesive that forms a physical bond with glass. The combination of increased thickness and aggressive adhesive greatly increases the ability to absorb the energy of an impact and keep the glass intact.

No. Any material adhered to the inside surface of the glass must be removed in order to properly install our ACE film.

No. All window tint, decals, signs, and stickers must be removed prior to installation. The security film must be applied directly to the bare glass surface.

No security film can completely eliminate fading. However, our ACE film blocks 98% of ultra violet light which can significantly reduce the rate of fading of furniture, carpets and floors.

Tinting film is usually a very thin layer of clear polyester film with tinting agents such as dyes and/or metals infused onto the film. Once this tinting film is applied to a window, how outside visible light comes through that window becomes altered. Normal auto glass without any tint applied will Reflect around 5% of visible light (known as VLR%), Absorb another 5% (known as VLA%), and Transmits 90% of visible light (known as VLT%) into the car.

Common thieves target your vehicle by the contents left in plain sight. Window tint can help hide any of your valuables you may have forgotten in your vehicle.

Dealer installed window security film costs between $10 and $12 per square foot and have up to a 6-month delay during peak hurricane season to secure a local installer. You can do-it-yourself today and save up to $8 per square foot. Installation is reasonably easy - you can do it, we will show you how. If you purchase your DIY Window Security Film Installation kit from DIYWindowSecurity.

Do not wash windows for 30-60 days after installation to allow for curing of our film. After this period, common glass cleaning solutions such as water, water/alcohol mixtures or ammonia based mixtures – which do not contain abrasive materials – may be used. Use a soft cloth, paper towel or squeegee. Do not use any material that is abrasive.

Security film can be used on any glass that is vulnerable to windborne debris or smash and grab thieves. This includes your home, office, or storefront windows, display cases, and automobiles.

Yes, clean window film just like a normal window using store bought cleaner, squeegees and soft paper towels. Just no razor blades or abrasives.

There is a scratch resistant coating on the film. However, the film can be scratched or punctured with keys, watches, rings, safety belt buckles, etc. Scratches caused by user neglect are not covered by warranty. Take

No, your window tint is on the inside of the glass. The decal is applied to the outside of the glass.

This is because the installation was performed by an inexperienced person. T here are special techniques, procedures and equipment used to ensure that bubbling will not occur. At Malcolm's Tinting, we always have an experienced installer doing the work for you. In fact, our installation is GUARANTEED not to bubble for the lifetime of your vehicle.

Yes, window tint can be removed at any time after installation. However, it must be scraped off entirely. It is a messy job. Please call us if you require a removal. We would be more than happy to assist you.

Yes, you can. We provide detailed measuring instructions for determining the amount of window security film you should order, a fast and easy ordering process via this website, and detailed installation instructions for installing security film on your windows. Security film is installed on the inside surface of your existing windows. On interior windows, the security film is installed opposite the strike or impact side so that it can absorb the force of the blow.

We provide nearly all of the professional grade tools necessary for you to correctly install the security film yourself. The only thing you will need is distilled water, a measuring tape, a cutting surface and a straight edge. See the Installation Instructions for more information.

This is difficult to answer with any degree of certainty because it is difficult to test for this. Window glass varies in strength from piece to piece, and lot to lot. So, if a 3M? Safety and Security Window Films? protected window were impacted, yet, failed to break, it would be difficult to determine if the glass alone, the film alone, or the film and glass together resisted the breakage.

Measuring is easy - you can do it. All you need to do is complete our Measuring Worksheet and you will instantly know how much window security film to purchase.