Everyone wants these to be TV's, but in most instances they are actually more closely related to the VCR. In a lot of models the only remote control that will satisfactorily work combo sets is the manufacturers original. In many cases even manufacturers that build their own TV's, have some other manufacturer build their TV/VCR combo's.

No, it will not. ProtecTV must be able to edit out the pre-selected swearword before it reaches the TV. This is not possible with the TV/VCR Combo units.

Long answer: The minimum requirement for reproducing audio and video on DVD is an MPEG video stream and a PCM audio track. (Other streams such as Dolby Digital audio, MPEG audio, and subpicture are not necessary for the simplest case.) Basic DVD control codes are also needed. At the moment it's difficult in real time to encode the video and audio, combine them with DVD-V info, and write the whole thing to DVD. Even if you could do all this in a home recorder, it would be extremely expensive.

It's generally not a good idea to route the video from your DVD player through your VCR. Most movies use Macrovision protection, which will cause problems such as a repeated darkening and lightening of the picture. See 1.11 and the Video RF section of 3.2 and for more info.

Our boats are equipped with generators so you can bring a TV/VCR. Don’t bring a TV alone as you won’t pick up any channels out on the lake. Our Lady of the Lake Series boat comes with a TV/VCR so don’t forget to bring some tapes along if you wish. Many people enjoy not having a TV.

Simply connect your coaxial cable into the HUSKYvision faceplate (the faceplate with only one coax connection) and the input jack on your cable-ready TV or VCR. Coaxial cables are available at the UConn Coop. If you have a VCR, connect your coaxial cable from the cable INPUT to the HUSKYvision faceplate. Then connect the OUTPUT jack from your VCR to the INPUT jack on your TV.

After you have set your TV / VCR to receive a cable signal, you will need to autoprogram it. You may also need to autoprogram your TV after any power outage or if your TV / VCR is unplugged.

It's probably because you're also using a cable box. The VCR or Combo will need to stay on channel 3 (or 4) at all times. You will need to use your cable box remote to tune the channels. For a timer recording, the VCR/Combo should be set to record channel 3 (or 4) and the cable box should be turned on and tuned to the channel you wish to record before the timer program begins.

VHS/DVD recorder combos are on the way from several makers, including Sansui and GoVideo (both of which may be available by the end of 2003). Panasonic has tentative plans to introduce one into the Japanese market in late 2003. If well received, you may see a similar unit on U.S. and European store shelves in 2004.

Sauder furniture is designed to hold most popular audio, video and computer equipment. However, there's simply no way to design furniture that will hold all makes and models. To be sure you're getting the space you need, measure your equipment, then check the furniture dimensions listed in our brochures or on the furniture cartons. Sauder Consumer Service Department can also help you with exact measurements of inside compartments and shelves.

LodgeNet™ is available in the guest rooms, featuring 13 regular stations as well as Pay-Per-View Movies. There are no VCR's in the rooms.

The cheapest TV seems to be at the large "GS" supermarket in Casteletto Tichino just outside Sesto Calende, towards the west side of Lago Maggiore. VCRs can be bought at several shops in Besozzo. Both TVs and VCRs are likely to be Samsung and made in the UK (and sold for less than they cost in the UK).

Using a switch on the front or back of your TV / VCR, it is often concealed by a door or panel. Using your TV / VCR remote, select "set-up" or "menu" to prompt an on-screen display.

No, both the Paging Assign Remote CP R1 and the Source / Level Remote CP R2 are discontinued and remaining stock has been sold. These are the only remotes that are compatible with the discontinued CP 62. Parts to repair existing remotes can be ordered through Customer Service. IMPORTANT NOTE: The CP 62 is the only Rane remote powered model produced which must use the RS 2 power supply.