Sure can! We can change your deck's color and look from red to blue. This is only available in staining products.

The answer is "Yes", but a little bit of preparation may be required first. Where a deck has been previously coated with a conventional oil, such as Cabot's Natural Decking Oil, you must first check that the surface has lost its water repellency. All that's required is a simple water spray test. Droplets of water are sprayed or sprinkles onto the surface. If the water "beads" on the surface, it is still water repellent and further weathering or sanding is required.

When you're looking for a painted-kind-of-look to match you home exterior, or when the deck has been totally neglected, solid stains hide and conceal any cosmetic imperfections that the lumber may have.

Shingles shall be applied over spaced sheathing except where local building code requires solid decks for seismic regions, in wind-driven snow or high wind areas. Shakes installed with interwoven felt may be installed on a solid deck. Pressure impregnated preservative treated products may be applied with solid sheathing and you should check with your local Building Official for specific requirements in your area. See the CSSB's New Roof Construction Manual.

You should use Cabot's Decking Oil on timber that still retains most of it's original colour. The naturally pigmented Decking Oil will enhance this natural colour and highlight the characteristics of the timber, while the enriching oil will protect it from cracking. Decking Oil is available in a range of shades designed for use on the most popular decking timbers, namely Merbau, Treated Pine, Jarrah, Cypress/Tallowwood as well as an All Purpose Natural shade suitable for all timber types.

Aerogel is made up of microscopic beads or strands connected to form a continuous network. Since the network fills space and supports itself, it is considered a solid.

The staining of visible fence surfaces is mandatory in The Meadows, Filing #8. Homeowners residing in the other sub-divisions are encouraged to stain their fences using the approved products. The Architectural Control Committee (ACC) does review the condition of private fences on an annual basis. Requests are made to homeowners to repair and stain their fences when these fences become unsightly.

Our retail partners, carry our product on their showroom display for you to see and touch. They will also be pleased to show you there stain color options and fabric options.

We offer any of the colors you see here on our website, however, stains will change color on different species of wood. We can also produce custom colored stains, just send a sample of what color you want and we will produce a custom sample board for you.

Answer: Adding the respective Clear UV formula will lighten or increase clarity; or, order a different color to mix in with your existing product to create the color you desire; or, return the product to a SANSIN COLOR CENTRE DEALER for adjustment.

The product does not require traditional timber treatments or any other kind of treatment BUT it will of course require normal cleaning with a pressure washer or hose/brush with a weak bleach solution or proprietary deck cleaning product to remove surface debris.

A major advantage of the flake system is that it does a good job hiding minor imperfections in the concrete. Since each flake color pattern incorporates many colors; you can select one that will go best with your décor and/or siding and window colors.

Most clients prefer to stain the house. These are available in many shades and hues and are available widely. There are UV repellant brands which make it possible to prevent fading over time. However should you decide to use paint any oil based paint is satisfactory.

They should not be used for solid-color coverage, but for design work. They are used for outlining, detailing, including eyes, personalizing with names and dates, and accenting design work.

Yes. There really is no limitation on using Maine Deck? in situations traditionally associated with timber decking.

you can see in the stain choice information, Golden oak is our number one seller, although we sell the other stains on a regular basis. If you have walnut or dark furniture, then walnut or chestnut might be a better color. On the other hand natural gives a clean contemporary look to the furniture. When in doubt one of our sales consultants can help you with your order. Call 432-0853 or 888-330-4807 or e-mail us info@houseofoak.com.

You can stain or paint a Catskill oiled unit as long as an oiled-based stain or paint is used. Oil-finished hardwoods, however, don't take stains that readily, but some customers do stain their bases and leave the top natural. If you do decide to stain a Catskill model, Catskill recommends that you try an oil-based stain or gel in an inconspicuous spot inside before doing the exterior. We recommend that customers always call Catskill at 607-652-7321 before proceeding with staining or painting.

Wristbands America has solved a problem that decal manufacturers have been struggling with for years ? how to get color in knife-cut exterior grade vinyl decals. We print our decals in full color, and then knife cut. We leave the lettering white for maximum visibility against a dark window. Simply put, this creates a striking decal and the best looking way to memorialize your loved one on your vehicles.

On a horizontal surface, Penofin may be expected to perform for an average of 9-18 months and 3-5 years on a vertical surface. The time will vary depending on the percentage of sunlight, weather, etc... Yes. All Penofin wood finish colors contain the same ingredients, just different amounts of colored pigments. However, you will not be able to make the surface lighter by applying a lighter shade. As always, you should test a small area before use.

HOME | PORTICO NEWS | ABOUT US | WHY PORTICO | FAQS | PRODUCTS | PERFORMANCE AND TESTING | FIND A DEALER | SITE MAP