Yes. You must ensure however, that port 3306 is available in order to permit connection to your remote mySQL server. Network Address Translation boxes are not a problem. Non-translating proxies might be however - contact your systems administrator if you are operating under a proxy to ensure that packets will be properly routed.

Outgoing SSTP connection can pass through any kind of NAT and firewalls - as long as TCP port 443 is allowed (which is normally the case). If the VPN client is behind a web proxy, then outgoing SSTP connection can go through in normal web proxy. SSTP does not support "authenticated" web proxies (i.e. proxies which require some form of authentication during HTTP CONNECT request). See similar questions...

If you are running through separate proxies for each service, you shouldn't need to do anything. If you are working through sockd, you will need to "socksify" your application. Details for doing this can be found in the package itself, which is available at: See similar questions...

Oh, no -- it is very likely that it WILL work. I am personally behind them, and everything works 100% at the Extranet. It just that it's also likely that such a firewall or proxy *does* interfer... See similar questions...

To let the PEER agent run in the background without seeing the window, go to Options, then Preferences. Here you will see an option for Launch PEER window at startup. Make sure this box is unchecked and hit Save. This error most commonly occurs on machines with foreign (non-Roman character) sets, such as Chinese, Japanese, Hebrew, etc. Contact your administrator for help installing a version of the PEER that will handle your character set. See similar questions...

Yes, the InfoGate 3020 can work behind a firewall or NAT, by opening the following ports: TCP/IP: 8481 UDP: 6024, 6026, 6028 & 6030 UDP: 1588 for InnoSphere See similar questions...

eCare uses the HTTP port (port 80) for initial communications and services between the Support Agent and the Client. The SSL port (port 443) is used for the View Remote User and Control Remote User features. Because of this, firewalls and/or proxies do not have to be reconfigured to enable online support, thus maintaining the safety of the corporate network. See similar questions...

FTP CLIENT will work with a proxy server or firewall as long as the proxy server or firewall is a "true" FTP proxy or firewall -- not one that substitutes FTP protocol with HTTP. (Note that Web browsers convert FTP to HTTP commands which is why a browser might work with a firewall when FTP Client will not.) If you are behind a [proxy server or] firewall, fill in the Firewall is tab in the Connection screen. See similar questions...

For best results, you should open/redirect ports 6881-6890 (this will allow for 10 concurrent transfers) to the machine you're running burst! on. If you cannot redirect these ports, but there is a port already redirected, then into Advanced: enter "--minport x --maxport y" without the quotes, replacing x and y where approriate. See similar questions...

For most routers, yes. The service is designed to work behind a NAT router and you should be able to just plug in and go, assuming your router is handling DHCP services. In addition, there is an excellent network connection troubleshooter built into the XBL front-end. You can configure your Xbox with a static IP if required, you can manually set various network settings, and you can even have the Xbox spoof a certain MAC address if required by your ISP. See similar questions...

This depends upon how your firewall / NAT server is configured. Please ask your network administrator if your firewall (or NAT server) is configured to allow PING and TRACERT to work (which use ICMP ECHO, ECHO REPLY, and TTL EXPIRED packets). You can test this yourself by running these programs on your computer (For example, try "tracert www.visualware.com"). If these programs work, VisualRoute should work just fine on your computer. See similar questions...

It should work with any type of firewall including Symmetric NAT. Symmetric NAT is performed only by advanced enterprise routers, in that case NATPass™ will recognize this scenario and will make the call succeed by signaling and doing RTP bridging. It is all transparent for the user and there is no need to reconfigure anything. See similar questions...

A firewall is a program that protects the resources of a private network from users from other networks. They are also often used by businesses to prevent employees from accessing certain ports or programs. Depending on the setup of the firewall, you may be prevented from accessing etree.org servers when behind a firewall. A proxy or gateway is an intermediate program that connects an internal network to the outside internet. Proxys can also be used as caching or logging servers. See similar questions...

I'm doing firewall/network configuration and need to know how the GIDB™ Client communicates with the data servers. All of the traffic from GIDB™ Client occurs over port 80 (with the exception of key requests that occur over port 443) and should look the same as regular web browser traffic to your firewall. See similar questions...

Yes, though you will either have to set up port forwarding or enable UPnP support on your NAT box (internet router). Many modern NAT boxes enable UPnP by default. Note that the UPnP support is currently in beta. You will have to download some additional libraries and change one setting to make it work. See question 24. See similar questions...

You can find classification of NAT in RFC 3489 – STUN http://www.faqs.org/rfcs/rfc3489.html. It should not mater what type of firewall you have. See similar questions...

Yes. WuWu is completely Firewall/NAT compatible! For additional information on this topic, please read the WuWu Firewall / NAT how-to. See similar questions...

The quick summary: You need to forward your ports if you have NAT in order to get the fastest speeds. This is probably the most common thing that people fail to do when using BitTorrent. Read on for more details of what all this entails, and if it's something that you need to do. Prior to version 3.2, BitTorrent by default uses ports in the range of 6881-6889. As of 3.2 and later, the range has been extended to 6881-6999. (These are all TCP ports, BitTorrent does not use UDP. See similar questions...

If you use your web browser at work, it is very likely that you are behind something called a firewall or a proxy (not the same thing, though). Most people using Internet from a school or company are behind one. These are used to act a guardian on Internet traffic to and from the company. Unfortunately, they often interfere a lot - for example, when it comes to uploading images at the Extranet. However, lots of people HAVE experienced upload problems without any firewalls or such. See similar questions...