The entrance to the loading dock is located off of Fourth Street and has a height restriction of 13'2"and no semi-trucks, single axle trucks only. Please contact the building management office at 589-4280 before scheduling any dock deliveries.

We ship on trailers that are generally 50-54’ long and require 75-80’ with the tractor included. Your loading dock’s length, available turning radius, access for backing-up to the dock and from the street must accommodate the truck’s dimensions. Standard loading docks are commonly 48-52” in height. Is your dock within these parameters? If not, you will need a fork–lift and the ability to move furniture from the trailer.

Yes, there are two docks available for van loading. We do require that all trailers are equipped with tie down capabilities.

The ideal way to send us your cartridges is to stack them on a skid and shrink wrap them. But this method does require a loading dock. If you don't have a dock, you can tape them in bundles or bulk pack them in larger boxes which can be easily lifted onto the truck. Look at our Packaging Suggestions page for more detailed information on packaging your cartridges for shipping.

Loading docks are ideal, but not mandatory. Orders should be stacked on a skid and shrink-wrapped, but without a loading dock this method will not work. Instead you can tape your boxes in bundles or bulk pack them in larger boxes that can be easily lifted onto the truck.

Yes, GenTech has a ground level entry dock and a semi truck loading dock that may be used for shipment deliveries given advanced notice and scheduling with GenTech.

All hosiery products are measured and sized using circumference measurements along the leg. They will fit most feet lengths and widths.

Trailer and its contents together must not exceed truck, hitch and/or trailer tow ratings. Towing vehicle must have a manufacturer's rated towing capacity equal to or greater than the gross trailer weight (dry weight of the trailer plus payload of the trailer).

We always want the ankle to be the closest measurement, since this is where the compression is the highest. If the calf or thigh measurement is within a few inches, then go with the size that accommodates the ankle. If the measurements are vastly different, a custom garment may be needed.

All Crystal Ear® products feature a readymade size/design that should fit most adult ears. Several alternate sizes of tips are included with your order to provide a proper and comfortable fit.

Most HPI Nitro kits will accept .12 or .15 "small block" engines from any engine company. HPI Nitro kits that include the Nitro Star 15FE engine must be fitted with our #A863 engine mounts to fit an optional engine (use #Z543 and #Z517 screws to attach the engine to the mounts and the mounts to the chassis). Note that "large block" engines will not in any HPI "Nitro" brand kits. Large block engines use a .

The number of product pallets that can fit on a truck vary depending on the weight of the pallet. To quickly calculate a rough estimate, divide the weight of one product pallet into 40,000 lbs. For example if the product pallet weighs 1200 lbs, then roughly 33 pallets will fit on a truck (40,000 lbs. / 1200 lbs. = 33 Pallets).

Sized to fit cars, SUV's and trucks. Three different size garages are available and will fit Ford Excursions, Chevrolet Suburbans, Hummers, Lincoln Navigators and Cadillac Escalades and other SUV's and trucks.

No. Each Armor Lid is specifically designed to exactly match your truck bed. It contours around your truck bed wrapping over the tail gate and bed rail providing a weather-tite, secure fit!

Yes. SUVs, vans, and light duty trucks up to 7 feet tall including extended cab, 4 door and dual wheel pick-ups can be accommodated in our LaserWash bays thanks to the unique ability to size every vehicle with ultrasonic and infrared sensors. No, there is no reason to be worried whatsoever. All antennas will absolutely not be damaged in any way by going through our carwash!

That all depends on what type of hitch receiver you have. Most trucks will have a Class III Hitch receiver which will require a 2 inch Hitch Cover. However some trucks have a class II Hitch Receiver which requires a 1.25 inch Hitch Cover.

Firstly is the "standard" that fits pallets sized 1000 x 1200 (40" x 48") or commonly known as the blue Chep pallet (yes, they are blue!). The trucks overall width from the outside of one fork to the outside of the other is 680mm (27") approx. The standard length is 1000mm (40"), a longer 1220mm (48") is also available. Secondly the Euro size.

Phase I: The port will measure 125 metres in length and accommodate up to eight 800 DWT (Dead Weight Tonne) vessels

We don't know. We don't know how big you are. Consult the size chart here SHIRT & SHIPPING INFO Gildan shirts are generously cut.

That is our responsibility. You just supply us with your height, weight, and actual waist size. We've been fitting athletes for over 10 years. We've picked up a little bit of knowledge along the way. We know how important the fit is to your success.