There are hundreds of thousands of types of molds. All are fungi, which means they are many-celled organisms that reproduce by sending tiny seeds called spores into the air. Molds need four things to grow: food, air, the right temperature and water. Although fungi grow naturally "outdoors", molds are very common in buildings and homes and will grow anywhere indoors where there is sufficient moisture.

Mold cannot be identified by sight and there are thousands of species of mold. My job is the first step, which is to collect samples and have the lab analyze them.

Molds can only be positively identified with a microscope. Bluish-green to green molds are usually Penicillium or Aspergillus. Black to brown-black molds can be Aspergillus niger , Alternaria alternata, Cladosporium herbarum, Cladosporium sphaerospermum, or Stachybotrys chartarum (a highly toxic mold). Reddish or pink molds are usually species of Fusarium.

Molds are the most typical form of fungus found on earth, comprising approximately 25% of the earth's biomass. Other fungi include yeasts and mushrooms. Molds are ubiquitous on our planet and are essential decomposers of organic substances necessary for sustaining plant and animal life. Molds are made up of masses of filament-like cells called hyphae. Under the appropriate conditions, the hyphae will grow into long intertwining strings that form the main body of the fungus, or the mycelium.

Much has been said recently about the problematic effects of mold growth on the indoor environment. Some would have you believe that mold is of little concern, while others, such as some in the media, are nearly hysterical. The truth lies somewhere in between. Mold or fungi have been with us since the beginning of time and place a vital role in the ecology of the planet.

If casting into a silicone rubber mold, it is usually not necessary to use a mold release because of it's natural no-stick tendencies. If in doubt, Alumilite offers a Stoner Urethane Mold Release that will not only help release your part but will also extend the life of your mold. If you are pouring into molds that are not made of silicone, a thick layer paste wax or Stoner is required. If you use a mold release, you may need to wash your parts prior to painting in order for the paint to stick.

A fungus problem usually starts with an injury or harsh chemicals under the nail plate at the free edge, creating a pocket in which the fungus can develop. It grows through the nail, turning black/green when reaching the top. Filing will not kill it, This type of problem must be looked at by a doctor. Yeast is perhaps the most common. The free edge pulls away from the plate, and if not checked can continue to the matrix area. Mold can happen anywhere moisture collects.

Anything can mold as long as there is moisture or a food source. Carpet, including those made of natural fibers such as wool, that is kept clean and dry shouldn’t have a mold problem.

I've had good experiences buying resins directly from Resins by Randy, Kitty Cantrell, Candace Liddy, Sarah Rose, Animal Artistry, Desert Artisans, among others.

Cutting speed can be 200 - 800 m/min. But please be careful that at plastics' high speed machining, softened chips by the cutting heat may adhere to the finished surface. K-grade carbide is also available but use an insert with the rake angle as large as possible in order to realize the sharp cutting and prevent chips' adhesion. Cutting speed should be under 200 m/min.

You are not obligated to purchase Liquid Resins equipment. Liquid Resins acquired A.C.T. to serve all windshield repair technicians, regardless of the equipment they use. However, Liquid Resins/A.C.T. is a truly complete windshield repair program. Please contact Liquid Resins for a FREE Product Catalog. You are not obligated to use A.C.T. for any length of time. We are certain that you will see the value in A.C.T. and will desire to continue utilizing this service.