If you can't hear sound from your speakers, it means the speakers are not connected properly, the sound card isn't setup correctly, or the speakers could be defective. First, check the speaker-to-computer connections. Make sure the cable connected to the "Audio In" jack on the speakers is also connected to the "Speaker Out" or "Line Out" jack on the sound card. You can test the sound card jack by connecting headphones to it.

When you can only hear sound from the front speakers, it usually means the sound card does not support surround sound, and/or the sound card is not configured correctly, the speakers are connected incorrectly or the speakers could be defective. First, make sure your sound card supports surround sound 4.1. A surround sound card should have a front and rear speaker jack.

If you can't hear sound from your speakers, it means the speakers are not connected properly, the sound card isn't setup correctly, or the speakers could be defective. First, check the speaker-to-computer connections. Make sure the cable connected to the "Audio In" jack on the speakers is also connected to the "Speaker Out" or "Line Out" jack on the sound card. You can test the sound card jack by connecting headphones to it.

When you can only hear sound from the front speakers, it usually means the sound card does not support surround sound, and/or the sound card is not configured correctly, the speakers are connected incorrectly or the speakers could be defective. First, make sure your sound card supports surround sound 4.1. A surround sound card should have a front and rear speaker jack.

Check to make sure that the volume, for your Operating System's Volume Control, is not Muted or turned too low. RichCast presentations requires a Windows Media Player to be installed on the machine to watch video or listen to audio. You may need to installor update Windows Media Player to hear the audio.

You probably don't have the proper software installed on your computer. Most of what you might need is free to download. Please go HERE for links to sites from which you can get what you need.. You're asking for a credit card as security, but we're going to pay by check, in full, day of the party. I'm not comfortable giving out my credit card to strangers. Ahhhh...so you don't trust me, but you want me to trust you? As an agent, I guarantee my performers payment.

A few possible answers here. For those of you who are completely technologically challenged, please check that the volume is turned up! This isn't as obvious as it sounds as of course there's the volume control on your speakers (and if it is this, then go and hang your head in shame), but also your windows settings (go to Control Panel then click on Sounds and Audio Devices to check). There is also the possibility that you don't have the right program.

Press and hold the main button for 1/2 second to change the VOLUME knob to its Mix / Separate Outs function, which is a balance control between instrument and drum machine signals. Set it to "EqU" (equal) at the middle of its range. If you turn the little Input Level knob up all the way and play, does the CLIP light go on? If not, check your guitar cable and guitar output.

It is possible that you either do not have HTML email enabled, or do not have Java enabled. Check to see if you are enabled. In addition, you must also have a sound card and an active connection to the internet.

Loose cables or cables that are not grounded properly can cause static. Check the connections to make sure all cables are connected correctly. Also, try adjusting the input volume from the media player you are using or from the sound control panel in your system tray.

That's the steering system of the Dolby Pro Logic decoder in your receiver extracting the rear channel information. Because the process is very phase dependant, the swishing sound (phase shift) can be evident during action scenes with a lot of panning. The latest Pro Logic II is less susceptible to this effect.

kX Audio Driver fully supports GSIF specification. There are currently two GSIF driver sub-sets: VxD and WDM-based. Since kX Audio Driver is a WDM driver, it supports WDM GSIF only. Under certain circumstances, this causes certain compatibility problems with GSIF-aware applications (such as GigaStudio and GigaSampler), especially under Windows 9x / Millenium. Please upgrade your Giga application (and install any patches available from Tascam).

What is the scratching sound I hear when I drive off in my Touareg? 4. Known Issues and Troubleshooting

It has been suggested that the quiet scratching sound that is heard when you drive off in the Touareg is part of the security system. Specifically, it may be the Immobilizer system reading the transponder in the key.

In Windows Media Player, make sure codec installer is turned on. From the menu bar select Tools/Options/Player/Auto Upgrade/Enable automatic codec download Your connection speed is too slow. If you are connecting using a 28.8 modem, your connection speed is too slow to view Stocking Videos. If you are accessing video from overseas, you may be experiencing slow response or packet loss in the delivery of video.

In this case you won't be able to talk with the other party. Most modems have a half-duplex voice circuit, which means that they can either receive (record) or transmit (play back) digitized voice. You can only talk through internal or external microphone attached to the modem. Your modem must support a speakerphone mode, which is intended to provide a full-duplex, hand-free telephone emulation. Usually a speakerphone support is declared on the modem box or in the name of the modem.

a first step, make sure that your PC has a sound card to play the audio and the volume on your speakers is turned up.

This can happen when the audio stream is badly interpreted, meaning there is a problem on AVI header. To check that, you can use GSpot. It will give you the encoding bitrate mode (in the bottom right of the "Audio" part): CBR or VBR (written in green on black background). If none mode is lighted, then you just pointed out the problem. You can use the following guide (FR) to rebuild quickly the AVI header and fix the sound problem.