QueryCAT Logo
Search 5,000,000+ questions and answers.

Frequently Asked Questions

What should I do if my decoder will not power up?

FAQ - PSC / Percon - Decoders
Make certain the decoder is connected to the host computer with the correct interface cable and that all the connections are tight. If you have a Series 20/Plus, make sure that the A/B switch on the back of the box is in the B position. If you have a Wyse or HP dedicated decoder (model #s 22-050-00, 22-055-00, 23-050-00, or 23-055-00), make sure to use it with a PSC power supply or equivalent 9V, 500mA, negative center, power supply.

What is a decoder?

MP3 FAQs - Audio-Now.com
A decoder converts an MP3 file into a WAVE file. This is the process most CD burning software goes through in order to burn your MP3s onto CD.

Do I need to use the Power DVD software decoder?

Addonics: Support: FAQs: Pocket DVD
No you do not need to use that decoder. You should be able to use any decoding program.However, other programs have not been tested nor are they supported.

What should I do to get optimal performance out of the decoder?

QDESIGN : Frequently Asked Questions
For best results, ensure that your QuickTime sample rate settings are set to the same sample rate as the audio file you are playing back. This is done from the Control Panel/Sound /Sound Out dialog settings on the Macintosh, and the Control Panel/QuickTime/Sound Out settings dialog box on Windows platforms.

What is Fill Power?

FAQ
Fill Power is a measurement of the quality of down products. Fill power is determined by placing 1 ounce of down in a glass tube. It is compressed, the weight is removed, and then the down is allowed to loft for 72 hours. The space the down occupies is measured in cubic inches. Down comforters with a higher fill power are lighter, fluffier, and warmer than down comforters with less fill power. Once the down has been separated, cleaned and sterilized, it's sorted by fill power.

Is WinAMP the only/best decoder?

Sound File Formats
No and no. WinAMP is very popular as a decoder because of it's popularity as a player, but the links in [5.3] will take you to some other decoders. www.mp3bench.com lists some interesting information about decoders and their bitrates. While WinAMP will decode at 32 or 64 bits, NAD decodes at 110 bits and reportedly delivers the highest quality .wav output. NAD is available at: http://nad.inept.org/

How do I get the decoder authorized?

American Forces Network Europe > Footer Links > FAQs
To request a decoder authorization customers must log on to the PowerVu Connect site at www.pvconnect.net and select "authorize decoders."  Customers then complete the decoder authorization request form by filling in the decoders Tracking Identification number (TID) and Unit Address (UA) and other requested information. The decoder request information will be reviewed by AFRTS-HQ.

What is a DVD decoder?

Showshifter Support - Frequently Asked Questions
A DVD decoder is a piece of software that decodes the MPEG data on your DVD so that it can be displayed.

What is the Protected Cart Decoder (PCD)?

elitendo.com - faq
The PCD is an accessory by UFO company that allows you to mix and match boot chips and save types. It plugs into the backup unit and has two cartridge connectors, one for the boot chip and one for the save type. This allows you to employ two different carts for booting and saving purposes. For Example: In the boot connector you have Jet Force Gemini which has a 6105 boot chip. In the save connector you have Yoshi's Story.

How do I adjust the color decoder?

Panasonic Plasma Display FAQ
There are several issues here. Generally speaking, the Panasonic decoder seems to push blue a bit. The R-Y Axis Angle and B-Y Axis Gain in the service menu are used to correct this behavior. There used to be a problem on some Panasonics with the Y/C delay on the S-video input. See the Quality Control section for more information.

How do I know which cable is correct for my decoder?

FAQ - PSC / Percon - Decoders
Our fixed station decoders and decoded scanners interface with over 300 different computers and terminal models. We also make a line of dedicated decoders for keyboard wedge configuration with specific models of Wyse and HP terminals. If your keyboard or terminal does not function when the decoder is connected, you may be using the wrong cable. The required cabling differs for each type of connection and decoder/terminal combination.

How do I program my decoder or decoded scanner?

FAQ - PSC / Percon - Decoders
Programming a decoder refers to controlling how it either interfaces with an input device or host, or how it reads and processes bar code data. All of PSC's decoders and decoded scanning devices have some type of programming capability. They can be programmed to work with a wide variety of host computers, from PCs to terminals, and most work out-of-the-box with standard undecoded scanners, wands, badge readers, and magnetic stripe readers (MSR).

What is a Higher Power... ?

FAQs - Adult Children of Alcoholics - World Service Organiza...
ACA is a spiritual program, based on no particular religion or set of beliefs but rather an understanding of a power greater than ourselves that can aid us on our path to recovery. This Higher Power is as diverse as the individuals of the group.

What is a power law ?

Self-Organizing Systems FAQ for Usenet newsgroup comp.theory...
If we plot the logarithm of the number of times a certain property value is found against the log of the value itself we get a graph. If the result is a straight line then we have a power law. Essentially what we are saying is that there is a distribution of results such that the larger the effect the less frequently it is seen. where N(s) is the number of events with size s and t (tor) is the exponent (the minus sign indicates that the numbers fall with increasing s).

What is a power spectrum?

Digital Photography FAQ
A power spectrum is the distribution of light energy at different wavelengths. This can be viewed as a graph where the vertical axis is energy and the horizontal axis is wavelength.

I have Orbit TV decoder. Do I need another decoder for the Satnet service?

Orbitsatnet-FAQ:::
long as you are an active Orbit TV subscriber you qualify, and all you really need is your computer, an Orbit Satnet Modem that we will supply along with all the necessary accessories and cabling.

What if there is no power?

FAQ
Not a problem. We can provide a generator to run the blower for your moonwalk. There is an additional $50 charge for the generator rental.

How much is your power bill?

Zimmerman Christmas 2005 - FAQ
About $400 over normal. Fortunately, not all the light bulbs are on at the same time with all the animation.
More Questions >>

© Copyright 2007-2012 QueryCAT
About • Webmasters • Contact