It's possible that the date and/or year were set incorrectly. You can correct these settings by expanding the date range from the" Data List" report. To expand the date range: the top of the "Report" window, select the "Date Range" field and choose "Custom" from the drop-down list.

Meters and laboratory equipment may be calibrated to test and measure blood glucose in different ways and therefore give different results.

If there are no meter readings shown on your bill, this indicates your charges were calculated based on a RUBS (Ratio Utility Billing) method. Using this method, utility charges are calculated based on the size of your home, number of occupants, or both. This is a fair and reasonable method of calculating utility charges when it is not physically or economically feasible to meter each unit.

If you think that we may have incorrectly estimated your account, or if our meter reader has been unable to access your meter, you can take your own meter reading and send them on-line.

If two meters are not of the same manufacturer, readings will likely not correspond, because of the different calibrations used. Made in the USA, Delmhorst meters are calibrated on the USDA standard, while foreign made meters use other standards and often have different species and temperature correction factors. Even readings on two meters of the same manufacturer may vary.

Estimations could occur when the meter is inaccessible to the Meter Services personnel. Your estimate will be based on your billing record by Billing Services at a Supervisor's direction.

If we are not on site witnessing the measurements ourselves or how the meter is being used, then we cannot take responsibility for any actual risks, nor can we guarantee how well our advice will apply to your particular situation. Also, we may or may not own your particular brand of meter and be familiar enough with it's operation and/or peculiarities to be as authoritative as we would like.

Like other shops that sell downloadable products, we do not refund or exchange a product that has been downloaded. This is not only because of the obvious reason, the fact that you now have the music file, and there’s nothing we can do to “take it back” or “un-sell” it to you. Besides this obvious reason, there are also other additional factors: Once you've paid for your order, you actually have a License Certificate for this piece of music.

Whether is it electric fields, magnetic fields, or radiowaves, the source of the field will always be in the direction of the strongest signal. It is critically important to avoid being fooled by thinking that the meter points in the direction of the source. A perfect example of this phenomenon involves powerlines. You should remember that the direction of magnetic field lines around a current carrying wire is circularly perpendicular to the wire.

Check that the Microsoft Media Player or a similar program is installed on your computer. If it is not, try downloading the software and installing it. If you still have trouble with the sound, contact us [link] explaining as best as you can the problem. We will try to help you solve the problem as best as we can.

The report comes as an Adobe PDF file, which most computers can open very easily. But I realize that there are some people who do not have the program necessary to open these files (Adobe Acrobat Reader), and have no desire to download it and install it just so they can see the report. And that is fine.

Packed carton box contains - Quick Start Guide of ELF3200 series meter, Limited Warranty Certificate, Test and Calibration certificate. First check the carton for signs of damage or liquid spills. If any damage is found, then you must lodge a claim with the transporter. In this case, please contact the transporter before proceeding with the unpacking; he may want his agent to be present. Please also read the Conzerv Limited Warranty certificate received with the meter.

However, it really does not matter. As long as you measure every time in the same place and at the same distance from the lamp.

After moisture content and a moisture gradient, if one exists, wood temperature is the most important factor affecting the accuracy of your readings. As wood temperature increases its electrical resistance decreases and indicated moisture content rises. The lower the temperature, the lower the indicated moisture content. Depending on the temperature and moisture content, you may have to make a correction. Delmhorst meters are calibrated at 70° F (20° C).

In cold and/or dry climates, static charges may cause erratic meter readings in the range below 8 percent. Measuring such high resistance under these conditions is difficult enough, but the winter months can make it more so. The analog meter pointer "jumps" all over the scale or the digital display may flash erratic numbers. To minimize the effect of static: Drive the electrode pins into the wood with the meter turned off, and then turn the meter on when you are ready to take the reading.

This is due to mechanical failure of the remote register, located outside the house, causing it to stop registering usage. The actual water meter, which is located inside the house, should still be operating properly. If you notice this, please contact Public Works at 847-599-6800, to have a service technician come out and upgrade your water meter to newer equipment. This new equipment will eliminate this problem. There is no charge for this service.

Check for correct CT connections. If CT polarities are reversed, negative KW readings will be displayed In order to identify the phase having CT reversal, view phase wise kW readings under kWavg. (Use'®' key to view phase wise kW). The phase showing negative reading is the phase in which CT is reversed. Check readings of phase angles of Current signal. If the polarities are interchanged, phase angle will be 180º out of phase.