Yes, we now have a great source where we can provide high temp tempered glass for fireplace doors. We need length, width, and thickness of glass and if the glass is enclose in full frame or has exposed edges. Turnaround time is 7-10 days.

Solution: Use smaller pieces of wood and place them to allow proper air circulation between the logs. The same weight of wood cut in many small pieces will produce more heat than fewer, larger logs. Only add big logs when you have a good bed of red embers. Logs with a diameter exceeding 6 inches (153 mm) should always be split. Avoid stacking logs to the top of the fireplace. Solution #1: In many cases, a weak draft is simply due to insufficient heat in the exhaust system.

The doors can make it easier to start a fire by channeling fresh air to the bottom of the fire. Shut the doors and open the vent at the bottom when you start the fire. Closing the doors and the damper when the fireplace is not being used will prevent more heat loss than just a closed damper. Finally, and most important, the doors let you retire for the evening while the fire is still burning. Just close the doors and keep the damper open.

Most of our cabinet suppliers offer a wide variety of glass options for your kitchen. If you can't find something you like, we can order doors prepared for glass, which can then be taken to a local glass dealer to customize to your taste.

Yes, we sell Mr. Flame Fireplace Glass Doors which are designed to work with the Fireplace Radiator™. Click here to view them.

It is recommended that fireplace glass cleaners be used; using a glass cleaner is not recommended for fireplaces because it could cause rainbowing on the glass. D o not use harsh chemicals such as windex, oven cleaners or scouring powders on the glass. This may cause scratches and damage to the surface. You should clean your gas fireplace at least two times during heating season.

This is a normal result of the curing process of the paint and logs. Glass should be cleaned within 4-6 hours of initial burning to remove deposits left by oils from the manufacturing process. A non-abrasive cleanser such as Brasso may be necessary. The glass panel must remain in place but the screen will be removed so that the fixed glass doors will not fit on the unit.

AXTRO® is capable of heating areas above 260 square meters (buildings constructed to regulation 10/91) with any number or type of radiator installed.

Solution: Gradually close the air control mechanism in order to keep the flue temperature within the comfort zone, between 250 and 475oF (150 to 250oC). If you do not have a chimney thermometer and would like to get one, visit your local Osburn dealer. Solution: Replace the gasket using a genuine OSBURN adhesive and gasket kit. Please consult our accessories sections. Solution: Put less wood into the fireplace. The fireplace will not produce as much heat and will not heat as long.

InFlame Fireplaces have a heat output of up to 9000BTUs/hr depending on the fireplace. This is guaranteed to bring ample warmth to any room in your home. A typical electric fireplace offers from 1500 to 5000 BTUs/hr (approximately.) so our entry level 6000 BTU/hr max. output fireplace will provide you with a great heat supplement.

In most cases you can use your existing glass doors and wire screen mesh. Most glass doors allow for some adjustment. The glass doors must be able to be raised up 1 1/8 inch so they can rest upon the front air diverter bar. This is very critical or the doors will have to be replaced.

Yes. We clean the doors both inside and out leaving you a perfectly clear view of what's cooking inside your oven.

Yes, we have literally hundreds of colors and textures to choose from. We have many choices in clear (no color) with contemporary as well as traditional patterns available. We can even install the glass for you! Yes, we can install your windows and door inserts if necessary. If you know how to do that sort of thing yourself, then you can just pickup your commissioned art glass at our studio and install it yourself.

No. Other than for child’s safety and curiosity there is no obvious reason to keep any screens on the fireplace unless your décor presents a need. There is no popping or risk of burning ash from the product as a risk to your home.

Woodfold offers doors fabricated of Class I fire retardant body panel material. This rating applies to the medium density fiberboard (MDF) body panel core only and does not apply to the door as a unit.

The glass and optical coatings we use are capable of withstanding very high temperatures for prolonged periods of time. Even after many thousands of hours of use, the colors do not fade or disintegrate. Similarly we use a special silicone adhesive to laminate the gobo layers together, which can withstand a continuous 205? centigrade - considerably hotter than a domestic oven. Our full color gobos are suitable for use in virtually all automated lights as well as profile spots and projectors.