We do not use Chipboard or Melamine. We often use MDF; mostly for internal surfaces and especially for the superior finish on painted furniture. We are happy to accommodate clients' wishes and can quote for ply, blockboard or solid wood as substitution materials.

A paperboard used for many purposes that may or may not have specifications for strength, color, or other characteristics. It is normally made from paper stock with a relatively low density in the thickness of 0.006" and up.

MDF is a wood product made from wood pulp. This results in a very dimensionally stable material that has no pitch pockets, sap streaks, grain tear out or knots. This makes an ideal surface for painting.

There's a huge debate on this one. MDF is know to be seriously bad if inhaled as the sawdust is extremely fine.

MDF and hardboard produce dust which is much finer and more readily dispersed than dust from solid wood, plywood or particleboard. MDF must not be machined in schools unless all occupational health and safety issues are addressed; including the use of WorkCover NSW approved extraction system. Schools generally do not have facilities to control the hazards from dust created when MDF is machined. The risks associated with the use of manufactured timber products are significant.

ldquo;The American College of Internal Medicine (ACVIM) has recommended that pets (dogs and cats) that ingested pet food that was on the recall list, whether showing signs of illness (lethargy, vomiting, diarrhea, anorexia, etc.) or not (asymptomatic) should be seen by their veterinarian for baseline blood chemistries and urinalysis in order to ascertain the status of their renal (kidney) function.

It appears that melamine was introduced through wheat gluten from a specific supplier from China. The FDA announced, during their press conference of March 30, 2007, that their investigation had not identified any violations at either of the Emporia, Kansas or the Pennsauken, New Jersey facilities of Menu Foods. The FDA also announced that they did not find melamine in any of non-recall impacted samples of finished product or raw materials.

HDF and MDF are man made products, manufactured from the waste thinnings of trees. Basically, hardwood and softwood chippings that would otherwise be discarded. They are then blitzed with resins in a huge blender and then compressed under massive pressure to form a dense sheet material. HDF stands for High Density Fibreboard, and MDF Medium Density Fibreboard. This process produces a very stable , strong and workable material.

Yes, this can be done if the area is relatively small. In a larger area, the glue dries from the outside, creating a seal that doesn't allow the center to dry. For large areas contact Roo for assistance.

Compression bits are designed to compress the material to avoid chipping and tearing the material. The result is a much cleaner cut without chipping or tearing the melamine.

What are the different high pressure laminate (HPL) thicknesses and how do the different thicknesses change the price and lead times.

We no longer sell MDF shutters. While similar in appearance to a solid wood shutter, we found they had two major drawbacks; the weight of the panels resulted in them sagging in the middle especially when hinged together and also screws tended to pull out because of the pressure on them and then didn't re-thread

a wood product, its usage is quite similar to solid wood. A list of suggested tools and techniques are included in the product installation guide.

Foster Farms feed ingredient suppliers have provided written guarantees that there is no supply linkage to China or recycled pet food products.

We only use pine professional stretcher bars that are industry standard. We consider MDF blocks with fabric glued to them to be far too heavy and inconsistent with quality canvas stretching workmanship.