Brush off all loose debris and scrape off any large deposits of moss or algae. Apply the solution with a pump sprayer to cool shingles! If the shingles are in sunlight, the solution will evaporate before it can work. Keep the roof surface wet with the solution for at least 30 - 45 minutes. Scrub lightly with a broom or brush and rinse well with water. Try a test section first using just one quart of solution. If it is still stained, boost the concentration to 8 ounces per gallon of water.

ZigiBoom.com recommends that all installation be done by professionals. We also recommend that the installer performs a 'bench test' on all the products prior to their installation. This test will enable you to know if a unit is malfunction and needs to be replaced. In that case the unit can be returned for exchange in an 'as new' condition.

The body of the unit can be cleaned with a damp cloth. The rear lint screen should be washed in a weak solution of ammonia and water, rinsed and then dried completely. The activated oxygen plates should be removed and gently scrubbed in the same weak ammonia solution and dried completely before being reinstalled in the unit. Do not put the screens or filter plates in a dishwasher.

Ensure the controls cannot be damaged and that it cannot slide about in either the boot or van you are transporting it in. If you are transporting a combo or cabinet ensure the speaker is facing down and the controls on the combo are not put under any strain, due to anything else in the boot or van. If transporting a cabinet with castors in a van either place the cabinet face down if this is not possible transport the cabinet on its side not on the castors.

The best way currently is to use your liquid dish detergent with warm water and rub w/fingers to remove and oil and dirt, than wipe with an optical cloth. Never use paper towels, Kleenex or fibrous cloth as this can cause your lens to permanently scratch. Also keep your lens from hair spray which can damage A/R coatings.

Even if you rinse your pots and cups after every use, which is advisable, they will eventually build up stains. Some people regard these stains as desirable, analogous to seasoning a wok. This seasoning is certainly desirable (and unavoidable) on unglazed equipment such as Yixing-style pots (see 3.1.2). Opinions differ on whether it is desirable on china, porcelain, or glazed earthenware pots. Those who do want to remove tea stains face some minor complications.

Wash your cart with a professional auto wash liquid and a soft, clean sponge. Do not use dishwashing detergent, laundry soaps, or other cleansers not designed for automotive uses. Waxing your cart from time to time is a good idea, but don’t use a wax containing abrasive compounds. Clean your windshield using water – don’t dry with a cloth of any type.

Some dentists still recommend brushing with a toothbrush, but most agree that a tongue cleaner (tongue scraper) is a far better tool. Toothbrushes are designed for cleaning teeth. Tongue cleaners are designed to clean tongues, which are very different to teeth! A tongue cleaner such as Dr. Tung's U-shaped cleaner is designed to gently 'scrape' off the unwanted bacteria and soft plaque, even from the back of the tongue where most is found.

We recommend that you use a slightly damp cloth for the daily care of your furniture. Should your furniture need a thorough cleaning, please use a mild soap that will not damage your furniture. No wax nor polish should be used. Though your furniture is protected with the Bermaguard? coating, we suggest that you use coasters to protect your furniture against heat and dampness.

The best and safest method is to use a toothbrush and toothpaste. You can, also, use proprietary cleaners but please follow the manufacturer's instructions carefully.

We sell special cleaning cloths and lens-cleansing solution to help you keep your glasses clean. You should also wash your glasses once or twice a month in warm, soapy water. Be sure to rinse well and dry them with a soft cloth.

If polished marble is protected with floor finish, the finish must be buffed or burnished and periodically replaced to keep the surface protected and looking good. Because marble is sensitive and porous, it needs to be cleaned with a neutral cleaner solution and then polished dry. Scratched and dull surfaces can be revived with a marble restorer (available from janitorial supply stores). Cultured marble is stronger than real marble, but it does lose its luster after being cleaned for years.

Regular sweeping, followed by a clean with a mop dipped into water with added liquid detergent works well for small areas. Commercial cleaning machines are suitable for larger areas.

We recommend you use a dry powder cleaning product only. Liquid cleaners should be used only with professional supervision. For major cleanings, standard carpet cleaning methods carried out by reputable carpet cleaning company are advised

Power vacuum with HEPA filtration along with a reversible power brush. The HEPA filter cleans the air and the brush scrubs the duct clean.

We give all of our customers a special cleaning cloth that makes eyeglass maintenance easy. Once a month you can wash your lenses with warm, soapy water and dry with a cleaning cloth.

The best way to clean the protector is rinse it under warm water and use a mild soap (not dish detergent, hand soap is fine). Once you're finished rinsing it, you want to go to place that is as dust-free as possible and dry the protector by flapping it up and down in your hand, like an old Polaroid photograph. You never want to leave the sticky side of the protector out for a prolonged period of time because it will catch unwanted dust.

Cleaning: After every treatment, thoroughly rinse the nebulizer to remove medication. Hand-wash with warm water and dish soap. Rinse thoroughly. OR... Wash in the dishwasher using a dishwasher basket on the top rack. Disinfecting: (done after cleaning) every 2nd treatment day, mix a solution of 1 part distilled white vinegar and 3 parts warm tap water in a clean bowl. Soak the nebulizer parts (except the tubing and mask) for 60 minutes. Rinse thoroughly. OR..