You can power your BibleStick through the USB port on your computer (and save your battery), but it won't recognize your BIbleStick as a data storage device, so you can't erase this and put something else on it.

It might seem that the USB device is fairly slow, especially when writing to the device. This is for two reasons: Firstly, USB devices are substantially slower than hard drives or other high-speed media; furthermore, larger-capacity flash memory devices are often slower for write access than low-capacity devices. Secondly, we mount the device in "synchronous" mode, which makes writes seem slower than the more common "asynchronous" mode.

The exact error message looks like Could not find USB device (vendor 0x0000, product 0x0000). Make sure this device is connected to the computer You have to set up the permissions on your USB device correctly. See Section 4.3, "Setting up permissions for USB ports".

The simplest way is to look for a Certified Hi-Speed USB logo on the retail packaging or on the product itself. The logo is exactly as shown on the right; it tells you what you are plugging into your USB port has passed the Hi-Speed compliance tests, meaning the product can enter Hi-speed USB mode if your system supports it. USBInfo & SiSoftware Sandra can also report USB speed status.

The exact message looks like *** Error ('Could not claim the USB device') *** Could not claim interface 0 (Operation not permitted). Make sure no other program or kernel module (e.g. dc2xx or stv680) is using the device and you have read/write access to the device. You have to make sure that no such kernel module is loaded and that you have set up the permissions on your USB device correctly, such that you have (non-root) write access to the camera device.

Devices must be turned on and present when you configure the system. After adding devices you must boot -r with all the devices turned on. See also 3.18

If you have Easy CD creator 5.0 or 5.01 Platinum this can occur. Apply the 5.02c patch from the link below. Uninstalling Take Two will also correct the issue.

Before inserting your USB memory stick, please log in to the machine directly (not via SSH from another system). Logging in at the console will ensure that the USB memory device is mounted with you as the owner. It is safest to insert the device into one of the USB ports on the front of the computer (rather than those on the back or on the keyboard).

The answer is no, your AC/USB Boostaroo isn't defective. What you are hearing is the transient noise that your PC produces naturally through oscillation of your power supply and the hard drive whine caused by its mechanical spin. These noises are much more common in older PC's, but a lot of newer PC's have noise filters built into the PC's USB ports, which eliminates these noises. If this problem is occurring, we recommend using the AC power supply for your Boostaroo instead of the USB cable.

Yes- The phone should work properly when plugged into a USB hub. If experiencing problems with a vPhone using a USB hub, plug the vPhone directly into the computers USB port.

Use the KeyCarbon USB just like a regular USB extension cable - unplug the USB keyboard, plug it into one end of the extension cable, then plug the USB extension cable back into the PC.

Close all the files accessed from the USB Device. Click the green icon on the system tray. Click on "Stop USB Mass Storage Device" A window would appear "The USB Mass Storage Device device can now be safely removed from the system." Click "OK" and then unplug the USB Device. Note: The green icon do not appear on Windows 98SE Operating System. Just make sure no files are open and then remove the USB Device.

Under certain circumstances the T8 will fail to recongize a USB device which is attached to the T8 before turning ON the T8. As a workaround, try turning ON the T8 first, then attaching the problematic USB device. This may allow the T8 to recognize the device properly.

The Xbox 360 will support as big of a storage device as you can format using FAT32. Unfortunately when formatting a device in Windows Vista or Windows XP you will be restricted to a maximum FAT32 size of 32GB. You can work around this limitation by using a 3rd party utility or using an alternative Operating System that does not have this restriction. Please note that the maximum size of any single file on FAT32 is 4GB.

The Andrea USB adapter is a half duplex device which means that it does not allow you to listen and talk at the same time. Part of the reason the Adapter works so well with our mask is that it does not have additional computer to audio signals to corrupt the input signal from the Sylencer. Instead, it provides a jack and adapter cord (with pink ends) that will plug into the USB wire side of the adapter that plugs into your computer sound card.

First, try plugging the USB Drive into the port that is most convenient for you. If your computer does not recognize your USB Drive, it maybe due to a lack of power provided from that specific port. USB ports located on keyboards or on the front of your computer may have insufficient power to run a USB Drive. Try using a port on the back of your system if the USB Drive is not being recognized.

Factory installed resistors allow for DSU/QSU/ESU/HSU-200/300 signal line termination in compliance with RS-422 and RS-485 standards. The desired termination can be selected or removed by configuring the associated jumper for each port. The factory default configuration is 'no termination'. Jumpers J2 through J5 (DSU) or J2 through J9 (QSU) allow the selection of RS-422 (100 ohm) termination, RS-485 (120 ohm) termination or no termination.