To eliminate this open your audio settings window (Playback) and mute the microphone slider by clicking on the square box next to the word "mute". This will put a check mark in the box muting your audio. It does not affect your microphone audio into the Echolink and internet. [ Top ]

The DVR does not have a built-in speaker to playback audio. A connection from the audio output to a device with audio output is necessary to hear audio.

Loose cables or cables that are not grounded properly can cause static. Check the connections to make sure all cables are connected correctly. Also, try adjusting the input volume from the media player you are using or from the sound control panel in your system tray.

No. The Microphone and the Audio Cord are both used for the same purpose. It is only necessary to use one of the two cords to receive audio.

No, you just need a computer or laptop or even a PDA and connection to Internet. You can schedule calls using dial-up modem too! It's that easy.

One of the keys to getting the most out of your audio investment is choosing gear that will go to work for you now, and won't become obsolete as your system grows. Most car audio amplifiers boast a design flexible enough to keep them in the game as your set-up expands. If you go with a 4-channel amplifier, powering a pair of front speakers and a subwoofer is a breeze. You'll simply want to run your amp in what we call "true" 3-channel mode.

Check if your microphone setting is set properly. The microphone icon is displayed on the upper right side of your screen, right above the volume setting. If these don't work, it could be possible that the audio may be muted on your PC. Check to make sure your PC is not on mute mode. Or maybe the headset or microphone you are using may have a mute switch. Check to make sure your headset is switched on. If the warning message still appears, the sound card may be incompatible with CleverClasses.

Please make sure to turn ON the audio in the Audio preferences window, and you have the correct audio driver selected.

Included with your rental is a PA System with a microphone. However, if previous arrangements have been made with your DJ or band - you can often use their system.

If your microphone has never worked, or it stopped working, first check the physical connection of the microphone. Verify that it is firmly plugged into the microphone port instead of the headphone or speaker port. If you are not sure which port is correct, you can check the sound card to see if it is marked (sometimes with a picture of a microphone), you can use a process of elimination, check the documentation that came with your hardware, or contact the hardware manufacturer.

ANSWER: We have discovered that most Internet users have their speakers turned on most of the time. The reason is simple, many people like to listen for the 'ding' when new email arrives or an instant message is coming in. Furthermore, with the interactivity of the Internet increasing (think music and videos) more and more people have their speakers turned on at all times.

Yes, if you have sophisticated telephony hardware such as the Way2Call Hi-Phone (as opposed to a voice modem with the UnimodemV TSP), plus TeleTools v3.7 Professional or Enterprise. Here's the explanation. TAPI supports two logical "devices": the line device -- controls the phone line, like dialing and tone generation and hanging up. The corresponding control in TeleTools is called etLine. the phone device -- controls phone features like microphones, speakers, and buttons. TeleTools 3.

If it's your first time running the CleverClasses application, your audio setup will pop on your screen right after the completed download process. To check if your microphone is functioning, click on the RECORD button. Test if your microphone works by recording your own voice. Click on the STOP button when you're done. Click on the PLAY button to listen to your recording. If you are done testing your audio, click on STOP.

Recommended cable for speakers is 2-core 0.75mm speaker cable. For standard microphones it will be a 2 + 2-core screened cable however, for microphones with selectable priority or microphones with zone selection etc? a 4-twisted pair with overall screen will be recommended.

If you can't hear sound from your speakers, it means the speakers are not connected properly, the sound card isn't setup correctly, or the speakers could be defective. First, check the speaker-to-computer connections. Make sure the cable connected to the "Audio In" jack on the speakers is also connected to the "Speaker Out" or "Line Out" jack on the sound card. You can test the sound card jack by connecting headphones to it.

If you can't hear sound from your speakers, it means the speakers are not connected properly, the sound card isn't setup correctly, or the speakers could be defective. First, check the speaker-to-computer connections. Make sure the cable connected to the "Audio In" jack on the speakers is also connected to the "Speaker Out" or "Line Out" jack on the sound card. You can test the sound card jack by connecting headphones to it.

Download and install the latest drivers for your sound card. These are usually available from the manufacturer's website. It could also be a conflict with the audio capabilities of your modem. You can disable the voice modem driver in Win 95’s Control Panel | Multimedia | Advanced | Audio Device | Properties | Settings. Click on "Do not use audio features of this device." Or, remove the device entirely.

You enable full duplexing in Cakewalk's Options | Audio | Advanced menu by placing a checkmark next to "Enable Simultaneous Record/Playback". If this option is not available to you, your card does not currently support full duplex operation. Get in touch with the card manufacturer for details.

WMVHD files, typically created for playback on the XBOX360, can contain a 5.1 audio stream. If you play such a file on a computer that only has two speakers then you will only hear the sound from two of the six channels. This causes for example the voices (center channel) to be almost unhearable. The solution is to downmix the 5.1 channels into 2 channels. There are two ways to do this. You can either use AC3Filter or ffdshow. In ffdshow audio decoder configuration, go to the 'Codecs' page.