We use the description "Magnetized thru thickness" to identify the locations of the poles on our block magnets. The thickness is always the last dimension listed for block magnets. If you take one of our block magnets and place it on a flat surface with the thickness dimension as the vertical dimension, the poles will be on the top and bottom of the magnet as it sits. For example: Our BX082 blocks are 1" x 1/2" x 1/8" thick.

While geomembranes come in various mil thicknesses, it can be misleading to assume that "thicker is always better" as thickness does not directly correlate across products to puncture and abrasion resistance. Liner thicknesses are determined by the project engineer based on project site specific conditions. The presence of a geotextile also can greatly affect properties (such as puncture resistance).

Once the 10+” of wool layers are stuffed into the cotton cover, the final thickness of the Cuddle Ewe Underquilt is approximately 3”. With use, the Cuddle Ewe Underquilt will compress to a thickness of about 1.5” to 2”. This is very normal and to be expected. Once the wool has compressed, there is nothing that can be done to re-fluff it, but it will still be comfortable. With proper care, you can maintain the Cuddle Ewe’s loftiness for a long time.

The magnet is an anisotropic sintered ceramic containing neodymium, iron and boron (NdFeB). The anisotropic nature of the material (meaning that it has properties that differ according to the direction of the measurement) is due to the tetragonal crystalline structure of the NdFeB molecule. The magnetic dipole associated with each crystal lattice site aligns itself along a well-defined axis within the bulk material.

Genetics and environmental factors (including diet, exposure to carcinogens such as cigarette smoke, and exercise - or the lack of exercise, etc) combine over time to cause inflammation of the inner layers of the artery and the formation of plaque on the inner lining of the arterial wall. This thickening can be measured using ultrasound and sophisticated edge-detection software to quantify the amount of disease present.

StockerYale's low power laser line projectors have a pseudo-Gaussian widthwise intensity profile analogous to that of many gas lasers. The thickness (or width) of the line is measured at the 1/e^2 points of this profile. A chart of LINE THICKNESS VS PROJECTION DISTANCE can be found in many of our Laser data sheets and brochures. In order to guarantee accuracy, the values measured were carefully taken using a Merchantek beam profiler.

The most important thing to understand about the thickness of stone picks is that they are on a whole different scale than plastic picks. This is because of the obvious difference in density between hard agate and plastic. We make the thinnest Stone Picks available, ranging from 1mm to 3mm, and Grip Picks ranging from 2mm to 5mm thick. Thin Picks are extremly sleek and slick but thickness equals mass and enhances tone and volume.

Well apparently it has to do with something called gene expression, which refers to the pattern in which genes are switched on and off. And gene expression has a major effect on your body's biological processes. Each cell in your body contains a 'power-factory' that produces energy, called the mitochondria.

Sintered Nd-Fe-B magnets will remain magnetized indefinitely. They experience a miniscule reduction in flux density over time. Generally the magnet will experience a degradation in its physical properties, such as corrosion, prior to it demagnetizing because of age. However, heat and high magnetic fields can demagnetize these magnets.

Materials Safety, it is against regulations to ship a magnet by air that maintains a field of more than 0.00525 gauss measured at 4.5 meters (15 feet) from any surface of the package. This is to prevent the magnet from interfering with the operation of the aircraft's navigational compass. There are no federal regulations that restrict the shipping of magnetized materials by ground transportation. Please check with your commercial carrier for additional specifics.

That depends on how the magnetism was lost. Usually magnets can regain their original strength unless theyve been exposed to extreme heat.

Since edge thickness is a function of lens power, centre thickness and curvature of the front and back curves (all inter-related) the edge thickness is influenced by the following features:

The model name label for all HealthSmart™ Beds includes the thickness designation of the top after the model name. For example - Haverville™ Luxury Firm 1X. The model name label is sewn into the lower right side of the HealthSmart™ Top. this time, Simmons manufactures HealthSmart™ Beds with a specific thickness of removable top. Higher end models will have thicker tops as part of the luxury step-up within the line.

Isotonic solutions cause no swelling or contraction of the tissues with which they come in contact, and produce no discomfort when instilled in the eye, nasal tract, or other body tissues.

The tonicity of the solution is less than that of the cells. When this occurs, water enters into the blood cells causing them to swell and finally burst, with the liberation of hemoglobin, or water invasion of the body’s cells. If this invasion is beyond the body’s cells, then water intoxication results, with convulsions and edema.