You have several options. You can purchase a Network Interface Card (NIC) at any computer supply store. This will require a physical installation of the card into your computer. Or you can purchase a USB-Ethernet adaptor which converts a USB port on your computer into an Ethernet port. We have USB-Ethernet adaptors in stock for purchase and delivery with your modem.

The wireless modem connects to your computer via an Ethernet Port. The Ethernet port is located at the back of your computer If you do not have an ethernet port there are other options. Call you nearest reseller.

Some DSL modems carry USB capability. This is useful alternative in instances where a network card cannot be installed. Please note that you cannot use the USB port of a usb HUB to extend the wire length between your modem and PC, or share the access to multiple systems. You can use the USB and Ethernet ports at the same time to facilitate access on two machines provided the advanced modem routing features are enabled.

Yes, you will have to register twice: once for the wired Ethernet connection and once for the wireless connection.

External adaptors are available for both desktop and laptop computers which connect to either a USB port or PCMCIA card slot.

The WLA660's Ethernet port (RJ-45 jack) supports 10 Mbps over a 10Base-T connection (half-duplex only).

Either one will work with the cable modem and service Wave provides. However, not all computer systems allow for a USB installation. Before your Internet installation, you must have a computer with a USB port, or have a 10 Base T Ethernet card installed in your computer.

A. The Targus USB Mobile Port Replicator with Ethernet is the world’s smallest expansion hub that provides instant peripheral device attachment and Ethernet via a single USB connection to Windows 98/ME/2000 based computers. Packaged in a small and attractive enclosure, the PA090U can fit any place on a desktop space. Add devices like mice, keyboards, joysticks, network, printers, PDAs, scanners, speakers, cameras, telephones and many more without rebooting your computer.

Please note: It is usually a bad idea to force the speed of an interface. If possible, leave in Auto-negotiate mode. Contact support@candelatech.com if you have questions. LANforge supports setting the ethernet port speeds through the GUI and CLI. The CLI Scripts page offers the lf_verify.pl script that has an example of setting the port speeds through the CLI. Information on how to set it through the GUI can be found in this section of the LANforge GUI Users Guide.

Unfortunately, this switch is defective. Please go replace you switch ASAP with your Vendor. If you have this switch over 30 days, then please E-mail rma@gigafast.com for future instructions.

Ethernet refers to the family of local-area network (LAN) products covered by the IEEE 802.3 standard and operates using three data rates (10Mbps, 100Mbps, and 1000Mbps) currently defined for operation over optical fiber and twisted-pair cables. Ethernet networks take on many topological configurations, but regardless of their size or complexity, all will be a combination of only three basic interconnection structures or network building blocks.

This happens when 'stackable' switches are stacked. The firmware in the stacked switches use a method to determine port numbers. IntraVUE reports the same numbers as the switch reports. As far as we know, there is no way to configure this in the switch, it is what it is.

Ethernet is the most commonly implemented LAN (Local Area Networking) technology for companies. Ethernet can transmit data through radio frequencies or Cat 5 cable at speeds up to 11 Mbps for wireless and up to 100 Mbps for wired.

Yes! There is a built-in ethernet port on all 61xx macs. It is an AAUI port. You will need to get an AAUI to ethernet adapter, from a company such as Asante. They are available in most of the Mac catalogs and cost around $30.

It is the left hand side of the vessel if you are facing forwards (an easy way to remember that port is left it that they have the same number of letters. Starboard and right have different numbers).