There are three ways to do this. The first is very easy: you simply use the Memory cdev to adjust the "memory" size, logout and then log back in. You must be 'root' to do it this way. The second way is to use the 'TBMEMORY' environment variable. You can set it's "value" equal to the amount of memory you wish to use. For example, TBMEMORY=10m; export TBMEMORY (in .profile for ksh or sh or /etc/profile) or setenv TBMEMORY 10m (in .login for csh) configures Finder for 10M.

Answer: -- It is easier to make the initial adjustment to your finder scope by day than to fumble around with the adjustments in the dark. Insert the eyepiece marked with the biggest number in the telescope. Focus on a distant object (far out on the horizon, if possible) and center it in the eyepiece field of view. Securely lock the telescope into position on the tripod.

Virtual Memory makes up for the lack of RAM in computers by using space on the hard disk as memory, Virtual Memory. When the actual RAM fills up (actually its before the RAM fills) then virtual memory is created on the hard disk. When physical memory runs out, the Virtual Memory Manager chooses sections of memory that have not been recently used and are of low priority and writes them to the swap file.

Virtual Server 2005 can use up to 64 GB of memory. Large memory support requires Physical Addressing Extensions (PAE) to be enabled on the host operating system. See the Virtual Server 2005 Administrator's Guide and Virtual Server 2005 Programmer's Guide, which are installed with Virtual Server in the Microsoft Virtual Server Program Group on the Start menu.

You can set the size of the tracing buffer in the SpeedTrace user interface. Switch to the 'General' tab and use the input field 'Max. Buffer-Size' You can also choose between a 'Limited' and 'Wrap Around' buffer mode (available only in Pro version). The second option will force SpeedTrace Pro to overwrite the buffer whenever the size limit is reached. Save to disk option is another alternative to adjust the memory usage. 'Max.

Virtual Dedicated Servers can be used by anybody who would require a particular UNIX based service to be running permanently on the internet. This could range from: and loads of other internet services. The most common use of a virtual server would be for Web site Hosting.

start-ups for which the minimalization of costs for the establishment and operation of their own office is important

In order to limit the amount of memory TurboIIS uses, please change the value in regedit "HKEY_LOCAL_MACHINE\SOFTWARE\ObjectsFarm\TurboIIS2003" value "MaxMemoryKeep"... it is the maximum amount of memory that tiis can use. TurboIIS is meant to use all of the available resources in order to deliver the highest level of compression available if you leave the default settings.

There is a file named 'netbeans.conf' which can be found in <NetBeans_home>\etc\ which you can edit to increase the amount of memory that NetBeans...

No. Since a chiropractic adjustment is a specific force, applied in a specific direction to a specific joint, it is virtually impossible to adjust oneself correctly and accurately. It is possible to turn or bend or twist in certain ways to create a "popping" sound that sometimes accompanies a chiropractic adjustment. Unfortunately, this type of joint manipulation is usually counterproductive, often making an already unstable spine even more unstable, and can sometimes be dangerous.

No. RAM and virtual memory are not the same. Virtual memory allows you to use a portion of your hard drive as though it were RAM. Because your hard drive is up to 100 times slower than your RAM, virtual memory is much slower than RAM. When you upgrade your RAM, you may discover that you use your virtual memory less because you will now have more memory available to complete the tasks that were previously handled by your virtual memory.

The Virtual Memory Usage probe checks amount of Virtual memory being used by a host and will generate alerts if the Virtual memory being used exceeds the thresholds set for this probe.

Go into the BIOS setup (hit DELETE key while system is booting up) and go into Integrated Peripherals / SiS OnChip PCI Device / System Share Memory Size. You can select 4, 8, 16, 32, or 64MB.