Since 3/8" Pex is rated to 2.5 gallons per minute (gpm), it is the correct size tubing for all std 2.0 gpm, or less, low-flow fixtures (lav's, toilets, kitchen faucets, dishwashers, washers, icemakers, etc). 1/2" Pex can be used for these fixtures, but more water is wasted waiting for hot water to reach the fixtures (1/2" Pex holds almost twice as much as 3/8" Pex, so it takes almost twice the volume of water to travel between the water heater and the fixture).

Yes. The MXLSA24 3/8" to 1/2" port adapter is used to crimp 3/8" Pex to 1/2" Manabloc ports. The MXLSA24 has a swivel nut, so you can crimp the tubing onto the fitting either before or after the fitting is screwed onto the 1/2" Manabloc port. See similar questions...

All our units perform very well however the 1/2 inch units will give about 40% more sessions before the elements need to be replaced. Also our model pro will yield the same results in 30 minutes that the model I and model II will yield in 40 minutes. See similar questions...

Most floors expand and contract with temperature fluctuations; expanding in the summer, contracting in the winter, throughout their life. Therefore, sealing of the joints will only last until the first heating or cooling season. See similar questions...

PEX tubing and various fittings, either plastic or metal, are tested together as systems for performance and health effects in accordance with industry standards to ensure product quality and end-user safety. [Back] See similar questions...

Yes, if your boiler is corrosion resistant and you use a stainless steel or bronze circulator pump and fittings, but the small additional cost for BPex is well worth the money. We recommend BPex or PAX tubing for all radiant systems. See similar questions...

Yes. Alters may be taught to group themselves in different patterns at different times, or two or more groups of alters may be used to form different patterns. "Back-up" programs are common, and much redundancy is built in. Alters may be programmed to self-replicate, or may be created by other alters. Not all alters have names; some are numbered, some exist only as fragments. See similar questions...

MySQL Cluster is supported on most Unix-like operating systems, including Linux, Mac OS X, Solaris, BSD, HP-UX, AIX, and IRIX, among others, as well as Novell Netware. Cluster is not supported for Windows at this time. However, we are working to add Cluster support for other platforms, including Windows, and our goal is to offer MySQL Cluster on all platforms for which MySQL itself is supported. See similar questions...

ClickOnce" ships in the .NET Framework redist & supports all of the same operating systems & languages as the core .NET Framework. Specifically Windows 98 & up, except for NT4. See similar questions...

Either size will work. However, the protective tape is designed for 5/8" gypsum board, so you may need to use masking tape when painting, if you use 1/2" gypsum board. See similar questions...

Yes, but you should watch the cost of fittings and plastic must be supported every two feet. Do not substitute fittings with Radiantec tubing. If you are using an open system, be sure that the materials are rated potable. All Radiantec polyethylene tubing is highly resistant to nearly everything. The reactivity charts show only a slight reaction to fuming nitric acid (above 1700° F) See similar questions...

the flame nears the bottom of the glass jar and most of the wax is gone, the glass at the base of the candle can get extremely hot and could be dangerous. If you discontinue using the candle with 1/2" of wax remaining, the base should not get too hot. You should also to remember to burn all candles on heat resistant surfaces. See similar questions...

Unless the tape is marked with the format or the machine model it was recorded on, then it's anyone's guess. The only way to find out is to try it on different format machines to identify it, as EIAJ-1, EIAJ-2, Skip Field, Pilot Tone, Pilot Tone A, Concord 12 ips or Shibaden, all use the same half inch reel to reel tape stock. The only way to find out which one, is to try and play them back on the appropriate format machine and see what works.. See similar questions...

Your post is too large for our product to guarantee a fix. The 4.0 inch Fencemender would have to bend out and around your post, which would compromise the integrity of the product. We can't guarantee that it would work, so I would have to discourage you from buying the product for your post, I wouldn't want you to spend more money than you have to.I'm sorry that we can't help you. See similar questions...

The kX driver conforms to the WDM (Windows Driver Model) specification and is therefore compatible with the following Microsoft Windows operating systems: Windows XP, Windows 2000, Windows 98 (Second Edition only), and Windows Me. Windows .NET Server 2003 may also be supported, however, this has not been tested. Windows 98 (First Edition) will not be supported since it has no built-in support for WDM drivers (v1.1 or later). See similar questions...

Currently CoCASA is compatible with Windows 2000 and XP. CoCASA is not compatible with Windows 98. Furthermore, at this time CDC cannot support applications for the new VISTA operating system. See similar questions...

A14. There are a lot of systems and items: radar, depth sounder, global positioning system (GPS), chart plotters with electronic charts, automated information receiver (AIS), weather fax, GRIB data, paper charts, autopilots, sextant, heading sensors, magnetic compass, lead line, barometer, pencils, dividers, rulers, binoculars. Both old and new technology help, and the technologies all complement one another. Generally, we have many ways to do the same thing when it comes to navigation. See similar questions...

PEX tubing was developed in the 1960s in Europe. PEX has been in use in many European countries for decades. In the 1980s, PEX tubing started to be used in the United States. Since that time, there has been a significant increase in both market demand and production of PEX in North America. [Back] See similar questions...

Visual Soakaway Design 4 has a user-definable setting for the Void Ratio of the soakaway. This can be set as high as 0.95 which is comparable to that found in Stormcell units produced by HRD Ltd. See similar questions...