These knives are made of an advanced, high-tech ceramic called zirconium oxide (also called zirconia). Zirconium oxide is extremely hard, wear resistant, and chemically inert. For the technically minded, zirconium oxide has a hardness of 8.2 mohs (vs. steel at 5-6 mohs and diamond at 10 mohs).

You can resharpen your ceramic knife by using our resharpening service. Only Kyocera advanced ceramic knives can be sharpened with this service.

Tests performed in EdgeCraft's laboratories demonstrated that Chef'sChoice® cutlery edges are more durable than ceramic knife edges. And, because of the inherently brittle nature of ceramic, they are prone to fail by chipping. Unlike Chef'sChoice® Trizor® cutlery, ceramic knives cannot be sharpened by any available conventional methods.

a retail bakery, we are primarily concentrating on the creation and sale of our own products. As with the cake toppers, this item is currently not available in our stores.

Store your sharp knives in a block, a knife case, a drawer wood holder, a sheath, a magnetic bar, or back in its original box. If your knives are thrown in a drawer, they will get dulled or possibly chipped, as well as being a potential hazard.

Shun's knives, due to the revolutionary nature of their Pakkawood handles, are dishwasher safe. HOWEVER, as with any lifetime investment, it's important to take the best care possible in order to prolong the life of your knife. For multiple reasons, we do NOT advise you put your knives in the dishwasher: Putting knives in the dishwasher is a major cause of accidents in the home. If you forget the knife is in the washer, you may cause yourself (or another) unintentional harm when unloading.

Due to federal regulations we cannot sell switchblades, gravity knives, "automatics", knives with bear jaw handles, and similar knives. We wish we could but we are not anxious to break federal laws that have been on the books since 1957.

All items sold carry the manufacturers warranty. If you have any difficulty please let us know. In the event the merchandise was damaged during shipping you will need to contact us for a return authorization #.

We are continuously ordering factory fresh inventory from the KA-BAR factory in Orlean New York to re-stock our product supply. These knives are sold to you exactly as they come from the factory. We will never sell a used or returned knife. We will eventually have special collectors website pages in which we will offer certain new and used limited collectors knives, but all items will be plainly marked and described as new or used. )

Two. The LeverEdge knife which is used for cutting hard foods as well as fast chopping and slicing and the bonus ripple cut knife. The bonus ripple knife also works well for fast chopping.

Rock in this case means gemstone, either solid masses or groups of minerals that form semi-precious and precious gemstone Tool Steels are a special classification of steels, made by special metallurgical processes, and must be hardened and tempered I start with a six foot long bar of annealed and spheroidized high grade tool steel and a chunk of raw rock.

The magnetic field of the base pushes sideways on the electrons in the top as they spin through the field. In a metal top, which conducts electricity, the electrons would flow. Resistance in the metal would damp these 'eddy currents' and dissipate the top's rotational energy, causing it to slow down and eventually fall. The ceramic top is an insulator, so the eddy currents cannot flow.

Ans: Packages are pre measured for 1 Gal, 2 Gal and 5 Gallons of paint. Money saving bulk packaging is available also. You can figure on an average coverage rate of 250-300 sq. ft. per gallon for most house paints on smooth surfaces.

Most FIR sauna heater elements are steel-coated. Steel coating is an older technology that directs the heat source but requires more time to warm up, operates at higher temperatures, and uses more energy to reach the level necessary for deep tissue penetration. Now, ceramic-coated heater elements result in lower temperatures and more efficient energy use. Ceramic-coated FIR heaters produce the same useful energy as the sun at a very safe (.

These scissors are made of an advanced, high-tech ceramic called zirconium oxide (also called zirconia). This material, which is second in hardness only to diamond, was originally developed for industrial applications where metal components failed. Zirconium oxide is extremely hard, wear resistant, and chemically inert. For the technically minded, zirconium oxide has a hardness of 8.2 mohs (vs. steel at 5-6 mohs and diamond at 10 mohs).

Even though ceramic coating is one of the superior surface protection methods for the oven cavity, the ceramic coating results in higher power consumption for maintaining a similar microwave density in the oven cavity as compared to an enamel coating. Again, brittle ceramic material tends to chip when subjected to sudden large impacts. In such cases, rusting of the exposed metal will occur leading to further rusting of the metal below the ceramic coating.

Ceramic coating is a thermal skin applied internally and externally to the header. This skin or coat, apart from other properties, consists of ceramic and aluminium. This combination provides very high thermal resistance and is an ideal coating for headers, pistons and other high temperature components. A by-product of ceramic coating is its high lustre or finish, and should increase the life of the product. We at Pacemaker recommend the use of ceramic coated finishes on all of our products.

The coating runs between 2 and 4 mils thick. If there are threaded holes on the part, you may have to re-tap them prior to installing the part. This will insure a proper fit of the threaded fastener. If the threaded area is critical, then notify us when the parts are delivered so we can mask off these areas to protect them from the ceramic coating.

Some of our larger pieces are made using refractory clay. This clay is course in texture, which leads to the finished and glazed product appearing speckled with tiny bubble holes and fine cracks giving it an aged look. Refractory clay is also higher in density, increasing the weight of the finished piece.