The Brita filter for pitchers and dispensers is designed to filter 40 gallons of water, or approximately 1-2 months for the average family. The Brita replacement filters that we sell have an indicator on the top that tells you when to replace the filter Be aware that the pitcher/dispenser must be used according to you owner's manual for the indicator to work properly. If in doubt, put in a new filter.

Filter replacement is essential for the Brita On Tap Faucet Filter to perform as represented. Filters should be replaced every 100 gallons of water or every four months, whichever comes first. An electronic built-in Filter Replacement Indicator will remind you when it's time to change filters.

The Pur plus filter for pitchers and dispensers is designed to filter 40 gallons of water, or approximately 1-2 months for the average family. The Pur plus replacement filters that we sell have an indicator on the top that tells you when to replace the filter. For 2 gallon pitchers the filter needs to be replaced when the red dot is lined up with the triangle mark on the top of the filter.

The Brita Water Cooler now uses the same filter as the Brita Pitcher, which is different from Elkay Puresmart water cooler filter, model 25008.

The filter is intended to be used only with municipally treated tap water or well water that is regularly tested to be microbiologically safe.

Igloo?, RCA? and Sylvania? are used under license and are registered trademarks of their respective companies.

The water filter is mounted in the plinth grill below the doors. It is removed by turning anti-clockwise about a quarter of a turn and pulling forward. The filter handle is transferred to the new filter, by sliding off, and is refitted by inserting with the handle in the vertical position and rotating clockwise until it stops. The filter must be rotated completely, to open an internal valve, allowing water to flow. Note: you do not need to turn off the water tap to remove the filter.

No. Do not filter water that is over 100?F/38?C. Hot water may release some contaminants that could be found in your tap water. Also, running hot water through the unit can severely diminish the system's filtration abilities. If this happens, you should replace your Brita On Tap faucet filter to ensure you enjoy all of Brita's filtration benefits.

Pitcher and faucet-mounted filters generally rely solely on activated carbon filtration. While activated carbon is very effective at removing a wide range of contaminants, the problem with this type of filters is that they contain a very small amount of activated carbon. Further, the time the water spends in contact with the carbon, particularly with faucet mounted units is too little to provide full absorption.

The Brita Pitcher Filter contains activated carbon and an ion-exchange resin. All of the ingredients in the filter have been approved by NSF International. you may know, activated carbon is widely used in the food and medical industry. Its function in Brita Filters is to reduce the following: chlorine (taste and odor), benzene, tetrachloroethylene, and toluene.

The biggest problem with hot water is the sloughing off of chemicals/compounds which had been adsorbed. The heat causes the carbon pores to open up. which could result in lead or chemicals being released into the water. And, the carbon would not effectively reduce contaminants in the water. Hot water is usually under 212 degrees, and that isn't hot enough to alter the raw materials, so there wouldn't be any damage to the filter itself.

How often and also how much water gets changed in one sitting varies among cichlid hobbyists. A typical regime involves changing 25% of the tank volume weekly. Other aquarists may change a greater amount of water only biweekly. But, exactly how much needs to be changed also depends on the number and type of cichlids kept. A tank that is heavily stocked with fish requires more frequent water changes of larger volume than one with few inhabitants.

There are several ways to successfully perform a water change. Some cichlid hobbyists use elaborate plumbing that constantly supplies fresh water to the aquarium. Others prefer a hose that attaches to the sink that utilizes gravity to siphon out the dirty water and add fresh water via the same tube. Even more common is the useful device called a gravel vacuum.

The filter media is made of activated carbon, a zeolite that acts as a lead scavenger and a binder that holds all the ingredients together in block form. Click here to see the Brita On Tap Faucet Filter at Work.

Brita is great for most pets. Since fish can be especially sensitive to trace elements in their water, we recommend using water from a Brita On Tap Faucet Filter and any neutralizer recommended by your pet store.

Brita is great with coffee, tea, frozen juices and powdered drinks. It's also great for preparing cooked foods and mixing infant formula.

Brita On Tap Faucet Filters can be purchased at mass merchandisers such as Target, Wal-Mart, Kmart; major drug stores; hardware and home improvement stores; grocery stores; specialty stores such as Bed, Bath & Beyond, Linen n' Things; and at warehouse clubs such as BJ's.

The pack station does not boil or treat water. Campsites are remote enough that we feel safe in using the water. It you want to purify water bring your own filter pump or purification tablets.

No. However, the system does need to be flushed for five minutes to activate the filter media and remove any carbon dust. The 100-gallon filter life begins AFTER flushing for five minutes so you are not wasting filter life by the flushing process. No. However, it removes microbiological cysts. It removes cryptosporidium and giardia by mechanical or "barrier" means. These are cysts that are about 3-to-4 microns in size.

The shelf life of a filter is indefinite as long as it is stored in its sealed Brita bag and has not been damaged. Filters should be stored in a cool, dry place.