This is a matter of personal preference. Infrared heaters will give you an instantaneous sensation of heat on your skin as long as you stay in range of the bulbs or element. Fan forced heaters raise the temperature of the air in the room so it will take longer to feel the heat. You are restricted to the line of sight that radiant heat requires. If you intend to use this as an emergency backup for freeze protection, definitely use a fan forced unit.

Most FIR sauna heater elements are steel-coated. Steel coating is an older technology that directs the heat source but requires more time to warm up, operates at higher temperatures, and uses more energy to reach the level necessary for deep tissue penetration. Now, ceramic-coated heater elements result in lower temperatures and more efficient energy use. Ceramic-coated FIR heaters produce the same useful energy as the sun at a very safe (. See similar questions...

Yes. Every infra-red heater manufacturer will say different things about why they feel their product is the best. You may need to sift through the garbage to find out for yourself what makes one appliance brand better than another. Most high intensity infra-red heater brands have few differences in performance. The same cannot be said for infra-red radiant tube heaters. See similar questions...

Most infrared heaters employ gas combustion (propane or natural gas) to heat a steel tube (tube heater) or ceramic surface (luminous heater), which subsequently emits infrared heat. It’s important to note how much infrared heat is emitted. You should also be aware that an infrared heater produces both infrared radiant heat (that is directed at people and objects) and convection heat that rises and is for the most part lost. See similar questions...

Infrared heaters warm the body in the same manner as natural sunlight. FIR heat therapy uses the wavelength of the visible and non-visible light spectrum of sunlight that heats the body normally. Traditional steam saunas raise the temperature of the air to a very high level within the chamber to warm the body. FIR saunas work differently. Instead of heating the air within the enclosure, FIR saunas emit a wavelength and heat the body directly. See similar questions...

Schwank infrared heaters meet the strict European standards for efficiency and hence give you far more heat for your money. Our mission is to deliver the best in commercial and industrial heating solutions at the lowest life-cycle cost. Many North American manufacturers have attempted to capture market share by designing and building inexpensive, low efficiency infra-heaters that meet the minimum requirements of North American standards. See similar questions...

Yes, engineering studies supported by ASHRAE have determined that using standard infrared heaters the total BTU input of a heating system can be reduced by up to 15% compared to calculated design heat losses. Tests performed by a certified independent laboratory confirm primoSchwank and supraSchwank radiant efficiencies in the 65 to 82% range. This means the total BTU input with Schwank heaters can be reduced from 27% to 41%, depending on the Schwank infrared heater employed. See similar questions...

No. There could be significant differences in the infrared output, based on the burner material, configuration, operating temperature, mounting angles, combustion air input and reflector design. For example, on average, more than 50% of the heat generated by infrared heaters is convection heat, and in some inferior models the percentage of convection heat is as high as 65%. See similar questions...

HotZONE™ heaters fitted with IRLensesTM increase the amount of infrared energy in the central beam by 3 to 5X that of a conventional heater by "stealing " the energy from the shoulders of the radiation pattern. There is a sharp cutoff between the hot beam and the cold shoulders. See similar questions...

Be sure the voltage supply matches the heater rating, the supply wires are sized properly, and the heater is clean. See similar questions...

Match exactly the wattage and voltage of the baseboard heater you are replacing. Check the baseboard heater for the identification label to determine wattage and voltage. If label is missing, measure the length of the baseboard (most baseboards are approximately 200 – 250 watts per foot), then determine the voltage of the heater by inspecting the circuit breaker. See similar questions...

Ans. Both types that is infrared and forced hot air heating system uses different method to create a comfortable temperature. Infra-red heats the air by using all three methods of heat transfer: radiation, conduction and convection. In other heating unit, the hot air rises to the ceiling and stratifies. It gradually work its way down to thermostat level hence the the floor slab never becomes warm enough to be comfortable. See similar questions...

A traditional steam sauna works primarily on the skin's surface, but far infrared heat penetrates the surface up to two inches. It is more energy efficient and takes less time to heat, and is safer and can be used longer because it runs at lower temperatures. In a comparison between a far infrared and traditional sauna, you can see how the infrared heat is more effective and penetrates the skin deeper than steam heat. See similar questions...

No, No, and again No! Infrared saunas and infrared light isn't at all dangerous. On the contrary, infrared rays are very beneficial and provide all the benefits of sunlight without the harmful UV rays. Using an infrared sauna, a person produces 3 times more perspiration, thus eliminating 4 times more harmful toxins from the body, which definitely makes you healthier. See similar questions...

The QDesign Music Codec takes a fundamentally new approach to encoding audio for low bitrate applications. Older technology, psychoacoustic codecs (such as MPEG, AC-3) analyze the audio through static filterbanks or transforms, which are used to approximate the characteristics of the human auditory system. See similar questions...

We guarantee that the athletes we train will be given the best training available. You will get out of your training what you put into it. See similar questions...

Because of the special training, technical expertise, and unique clinical environmental needs necessary to perform DII, many centers do not have this technology as of yet. Currently, independent digital infrared imaging centers and highly specialized independent breast clinics are the most common place to find this technology. See similar questions...