Windows 2000, XP or Vista on a PC. You must log in with Administrator Privileges to install and start the software. Minimum RAM: 256K RAM for text chat only, 512K RAM for multi-media presentations, more may be needed for presenting, recording and/or running other programs at the same time. For audio, the Truespeech audio codec must be installed. See Truespeech in "I can't hear anyone".

See Firewalls, Routers and Ports. For more detailed information on opening up ports in a LinkSys router, see hotComm and LinkSys router.

Connect to the router through web browser. Set the broadcasting IP address and Port, select TCP-IP protocol. How to ... If you hear nothing from your broadcasting page, check the 'Tools > Internet Options > Advanced > Java (Sun) > Use JRE v1.x.x_xx for <applet>' option in MS Explorer. If there is no such option or if the JRE version is lower than 1.

Why can't I login to the router? The Internet Explorer gives me "the page can not be displayed."

No. Computers with static or dynamic IP addresses will work with our routers. If statically assigning an IP, make sure the default gateway and the DNS server IP addresses are the same as the LAN IP address of the router (usually 192.168.0.1).

Zolved does not require configuration of routers or firewalls. Just click on download and install the software. Click on the Zolved Icon and you are ready to connect with anyone securely. However, there may be situations where Zolved Remote Control does not work. If it does not work for you, please give us some feedback on your configuration and why you believe it may not be working. Zolved does not require configuration of routers or firewalls. Just click on download and install the software.

If you purchase your hardware through Extreme Internet we will configure the router and CSU/DSU, hand deliver them, and install them with a smile.

Sometimes a graphic is too complex for an equivalent alternative to be given in a sentence or two. This is often the case with 'Real' Graphics, like charts or mathematical formulas. When this is the case, you need to provide a long description. The HTML specification for the Img element allows for a longdesc attribute. The longdesc contains the URL to a web page with a textual description of the image. To return to dog example: lt;img src='images/murray.

We cannot verify the security of any content you provide to the forum, including but not limited to pixel works, personal information, and comments. We appreciate the desire most people have for privacy, thus we will not sell any information you provide to the forum or give that information to any profiteering external entities. However, we do conduct activities in which works may be used to promote or support this forum or services at Pixel-Arts.Org.

There is no general method that works for all firewall / router combinations. Check http://www.portforward.com/ for information, and also try "port forwarding" in Google. Some methods are listed below, but we need help with this section. (The best way to help is to contribute to the forum http://www.rejetto.com/forum/index.php?board=27.0) First, navigate to Network Connections. (Or open it in Control Panel.

While we try to provide the highest level of customer service, we do not provide ISDN modem or router configuration services. We will provide you with all of the information you need from us to connect to our service. If you are new to ISDN and have a limited knowledge of modems and/or routers, we recommend that you have someone with a technical background handle your configuration and setup.

Vigor routers allow the unit to be configured from a remote location. This can be exceedingly convenient for IT Network support staff to configure routers at branches, or from their base without having tmake site visits - but it does add a security risk. From your Vigor router's web configurator Main Menu, select "Management Setup" from the System Management menu.

Both the transmitter and receiver must have equal configuration regarding: - Payload size.- Speed on air.- CRC size and enabled.- Address size and field. Also, see the guidelines on choosing an address in related questions below.The payload can contain any data and doesn't need to be scramble...

You configure each section (numbered 1-10) by pointing DSpy to the proper directory on your network. By putting a shortcut to DSpy in your startup folder, it will start with your TSC client during every boot/login and automatically start tracking your TSC progress.

default, e-TV uses port 12011 for control and 12010 for data. These two ports should be opened when using a router. However you can change them from eTVStation (File/ Set Port Number... ) if these ports cannot be used. You will have to consult your router's manual and look for the port forwarding or virtual servers section. Or refer port forwarding.

Yes, a D-Link DFE-2616i or D-Link DFE-2624i can manage the D-Link DFE-916 models in a single intelligent, SNMP-based hub stack. One stack can have a maximum of five hubs regardless of type. In a typical application for a Fast Ethernet class II repeater, the maximum distance between DTE-to-hub-to DTE is 205m. With a D-Link DFE-260TX module, you can extend the distance between two hub stacks and extend the DTE-to hub-to-DTE distance to 300m.

You will now be taken back to the Setup Wizard. Enter a name for the connection, leave the Username and Password fields empty, leave the VPI and VCI settings at their default, and finally choose "bridge" as the protocol. Connect your router to the ethernet port of the Westell, and proceed with the configuration of your external router according to the instructions provided by its manufacturer. Remember to configure your external router for PPPoE with your DSL username and password.

If your server is behind a firewall or router you will need to allow the relevant ports for the FTP server through. The ports that must be configured for firewalls and routers include port 21 (standard FTP port) and port 990 (for implicit SSL). If you have changed these default port values on your FTP server then you should forward your port values instead. When FTP clients are using PASV mode for files transfers, the FTP server needs to be able to open additional ports.