Using the 'Ping' commands in UserGate is not possible at the moment, because UserGate does not allow ICMP traffic.

For example, if your PC connected to a router with IP address 192.168.1.1, after you type C:>ping 192.168.1.1 you get reply from that IP address, that means your PC is connected to the router. For example, if you type C:>ping 66.218.70.50 you get reply from 66.218.70.50, that means your PC is routed through router to the 66.218.70.50 web server. If you type C:>ping www.yahoo.com then you get reply from 66.218.70.50, that means your PC set up with working DNS server.

NetRanger provides you an easy-to-use Windows application with all necessary tools integrated. You don't need to start a separate command line window and remember the commands and parameters. Everything is just one click away. If you're a system or web administrator and need this information regularly, this can saves you significant time. NetRanger goes much further than just simple command line utilties.

Many players will ask for their pings in games. The "ping" is the time it takes your computer to communicate with the host computer or server. It is measured in milliseconds and anything under 400 is considered to play smoothly.

You can always ping your own computer by using the address "127.0.0.1". As a shortcut you can use "localhost" as a host name. You might also consider adding the line "127.0.0.1 localhost" to your Hosts file.

Ping command is only used on local network. With a PC or a notebook computer, you can assign an IP address to WebEye connected on local network with ping command or setup program. If you cannot assign IP address to WebEye with ping command, you should check under written 2 points. First, you watch the LED in the rear of WebEye. For accurate judgment, you disconnect and re-supply power to WebEye. WebEye has two LED of yellow and green in the rear.

The Dsquery command lets you query Active Directory (AD) for most types of objects according to passed attributes. To see the full list of options, type For example, to find all users whose name starts with the letter J in domain it.uk.savilltech.com, I typed You can also combine switches, if necessary. For example, to find all users whose name starts with the letter J and who hadn't changed their passwords in more than 10 days, I typed

You should ping your first hop apprx fifty times. (To get your first hop do a tracert to anywhere and note the first address like 10.xx.xx.xx The pings to your first hop should normally be under 30ms with an occasional ping in the 60-70ms range. Disregard the first ping. If you see high pings or a high spike and are running Win9x/ME hold down Ctrl/Alt/Del and "End Task" on all programs except for Explorer and Systray. Then try the ping to your first hop again.

File uploads are an often-used feature of MediaWiki, but are disabled by default in all current release versions. To enable them, first make the upload directory (default images) writable by the web server (chmod 777 or allow the Apache user to write to it, etc.) then set $wgEnableUploads to true in LocalSettings.php (i.e. "$wgEnableUploads = true;"). See Manual:Configuring file uploads for more information.

When I try to upload files in Mediawiki 1.5 I always get a "The file is corrupt or has an incorrect extension. Please check the file and upload again." error. When I try to upload bigger files in Mediawiki 1.5 I always get "Internal error! couldn't move "/tmp/somefile" to "/wikidir/images/temp/filename"

Ping is a basic Internet program that lets you verify that a particular Internet address exists and can accept requests. Ping is used diagnostically to ensure that a host computer you are trying to reach is actually operating. If, for example, a user can not ping a host, then the user will be unable to use the File Transfer Protocol (FTP) to send files to that host. Ping can also be used with a host that is operating to see how long it takes to get a response back.

Follow Start Button Control Panel >> Network >> TCP/IP >> Properties >> Specify IP address. Follow Start Button >> CP >> Network >> Protocols >> Select TCP/IP >> Properties >> Specify IP address. Follow Start Button >> Control Panel >> Network and Dial-Up connections >> Select Adapter >> (Right Click) Properties >> Select TCP/IP >> Properties >> Specify IP.

PING stands for "Packet InterNet Groper," and what is measures is the amount of time it takes for data to get from your machine to another machine elsewhere on the Internet and back again. The easiest way to find your ping, is this: In the newly-opened MS-DOS? window, type "ping <host's IP address here>" (without the quotes and fill in the IP address) ideal ping is anywhere in the range of about 100 to 200ms. Anything below 100 is almost unheard of, but very nice.

Command!? is a workflow manager, document retrieval, and time tracking system for Windows text, audio, graphics, video, and other files.