Applying two coats of Latexite® will dry and cure much better than one thick coat. All Latexite®sealers are water based, which "cure" via evaporation. A thin coat will evaporate much faster than a thick coat will. If you apply one thick coat, you are "locking in" that initial coat and the sealer will hold water which causes tracking.

A Actually, one coat will seal the threads. You probably will want sufficient coats to create a smooth surface wherein no threads can be detected when scratching with a finger nail. It takes about 5 coats on the norm to pass the finger nail test. This is assuming A thread and no CP. See similar questions...

coats in lightly-used areas like bedrooms, 3 coats in living areas, and 4 coats in entrance halls, kitchens and bathrooms. See similar questions...

A The first coat penetrates and seals the cork. The second coat cannot possibly penetrate, as the first coat has done its job and the cork is sealed. So the second coat merely sits on top of the first coat and there is good reason to believe that it will be subject to peeling in the future. After a year or two of usage, if it appears that another coat would be beneficial ?lightly sand the entire cork coated handle, and apply another coat See similar questions...

All paint manufacturers require two thin coats vs. one thick coat to obtain their warranty. One coat coverage requires the paint film be applied at an inappropriate thickness, which leads to premature cracking and peeling. See similar questions...

You may apply to the Tennessee Vital Records Office for an apostille. Follow the instructions to request a certified copy and include one check made payable to Tennessee Vital Records for the required copies. Include a second check made payable to the Tennessee Secretary of State for the apostille; the fee for the apostille is $2.00 for each document. See similar questions...

These rough breeds don't need a particular toilet. We must avoid frequent washing; if necessary we can rub the coat with a vinegar and water imbued cloth. When dry we may brush it with a large-teeth comb. The moult period (at change of season) is the most binding as we must brush it more than we normally do to completely eliminate the dead hair. These things apart I can say that their management is very easily indeed. See similar questions...

There are some data that indicate some sealants can reduce dislodgeable residues. These data are being considered as part of our bystander exposure assessment. See similar questions...

If they go for long walks in the Vermont winter, they do need coats. If they just go outside for a few minutes to do their business, then no. See similar questions...

A few golf clubs and hotels require this for complete access to their facilities. If you are in doubt, please ask your golf travel specialist who can assist, relative to your trip. On tours with our Concierge Driver you should expect him to “manage” your experience. He will remain with you throughout, from your arrival at the airport until departure. See similar questions...

Ink jet media has a receiver layer on the top of the substrate that acts like a sponge. Ink jet inks are water based, and when sprayed into the receiver layer, the layer absorbs the ink. Even when an image is on the media, the receiver layer still acts like a sponge, and will absorb all moisture, fingerprint oils and atmospheric contaminants. Therefore we strongly recommend to either frame an ink jet print under glass or seal the print with PremierArt Print Shield or PremierArt Eco Print Shield. See similar questions...

That's not a preist, that's Crimson Christian, from a comic written, drawn, and self-published by Matt Williams, I just borrowed him for a crossover for an escuse to have someone quote from Army of Darkness occasionally. See similar questions...

A - Sealing the stone is not required. However, use of a high-quality, "breathable" concrete sealer will reduce water penetration into the stone. Breathable sealers will allow water that does absorb into the stone to come out. Breathable sealers will extend the life of the product by reducing freeze/thaw stress and blocking contaminants from entering the concrete. CAUTION: Sealers will have varying impact on color. A sample should be tested before applying to your project. See similar questions...

Due to the quantity of logos that we have in our library we do not include all images on our site. If there is a particular logo/seal you are looking for send an email to request@robertmonroeco.com with a description of the logo/seal you are looking for. If we have the logo we will send it to you for your verification. See similar questions...

No. Company seals used to be required by the law but now they are optional. Our Constitutions have been drafted accordingly and under them all directors are able to bind the company by their signature alone. See similar questions...

This primarily comes into play if your deck is well above ground (4' or higher). The answer is no. The reason you are sealing your deck is to prevent the sun from aging the wood and more importantly, to prevent rain from rotting your deck. Since the understructure never receives any real sunlight and gravity dictates that water will not stay on the underside, it is not necessary to seal that. See similar questions...

Yes. If you elect not to seal your deck it will age prematurely and will not last as long as a properly maintained deck. A properly maintained deck in our climate should last 30 years. for what type of sealer, we highly recommend to use cost as an indicator. There are definitely reasons why a gallon of Brand X costs $15.00 while Brand Y costs $40.00. Lower cost doesn't necessarily mean better value but it definitely could mean lower performance. See similar questions...

You should seal your Tatouage with several coats of clear acrylic spray when it is applied to semi-gloss/high-gloss surfaces, furniture, floors, floor canvases, high moisture areas or any generally high traffic area. You do not need to seal it when applied to walls that are painted with low-sheen, or matte paint. See similar questions...

If limestone is sealed correctly the first time, it should not require further sealing for many years. See similar questions...