The smallest hole that can be perforated is typically equal to the material thickness. The physical and chemical properties of certain materials like brass and aluminum allow smaller holes than the material thickness to be perforated.

Smallest achievable hole size (and largest achievable hole size) is dependent on the material, material thickness and laser used. It is possible to drill 1 micron holes through thin material at aspect ratios of up to 100 to 1. It must be remembered, however, that there will usually be taper associated with the holes and the entrance diameter will be larger than the exit. We normally specify EXIT diameters.

We can effectively make a hole as small as 1.5mm in diameter. This saves you a great deal of time when you have a lot of various diameter holes in a part. We can even make hole in fragile materials, such as glass or tiles, without cracking.

Each Foreign Exchange Company will have a limit as to the lowest transaction size that they can do. Information on request

Insaco is typically capable of generating tightly toleranced features to .001”, or even .0001”, and in some cases even tighter. However, since our work is done by diamond grinding, we do have to have a means to fixture the piece, also to clean and handle. So extremely tiny pieces pose special constraints. (back to the questions)

We can produce components that have a shot weight of less than a gram up to 150g. To give you an idea of the types of components please click here.

Although we believe that no job is too small, currently our smallest job size was approximately two to three thousand dollars.

We have an image of dinosaurs as huge animals, however, the smallest dinosaur was about the size of a rooster.

Normally I make my beads with a 1/16" hole, but they can be made with a 3/32" hole if you request it.

Unless otherwise stated, I make my beads on a 3/32" mandrel which makes the hole about 2.5 mm. A bead made on a 1/16" mandrel will have a hole about 1.5 mm. I can also make them larger. The next size up is 1/8".

For teams 11/12 would be the smallest size of group we handle but the more members in the group the cheaper the cost per head.

of right now the smallest size we carry is 8 and the largest is 12, we do have size 13 in some styles, please contact us first before you order if you are wanting a size larger than 12.

In the “Z” (depth) direction, AMI is sensitive to separations as small as 200 Angstroms. In the X-Y directions, the resolution is based on the ultrasonic frequency and the design of the transducer. Typically the resolution is about 250 microns for 10 MHz, 75 microns for 30 MHz, 25 microns for 100 MHz and 10 microns for 230 MHz. However, a transducer can actually detect defects smaller than its resolution by an order of magnitude.

Answer: Yes. As long as there were sufficient space on the site to build an IPFC plant, there is no reason why it couldn't be built at an existing powerplant or refinery site. Therefore, in utility applications, the IPFC is suitable for both repowering applications and new power plants. Co-location at an existing power plant or refinery could have cost savings associated with sharing fuel preparation and delivery support infrastructure.

All of our Czech Fire Polished Beads have the standard size hole. We recommend using a wire no larger than 0.6mm. The Bead Superstore is an online beads store. Our contact details for formal business mail only are as follows. All other enquiries please use the contact us link at the bottom of this page. The Bead Superstore prides itself on offering a high quality service and customer satisfaction.

With Men's shoes the smallest size is 6.5 and in women's the smallest shoe size is 5. Remember we make a Crib Classic too, and we have sizes all the way down to 0 for your little ones.

The minimum widths are 20” (for hard wired) and 30” (for infrared remote controlled). The largest width is 192”, but in practicality is determined by the blind manufacturers, which typically have maximum widths of 142” for metal blinds, and 96” for wood. Yes, realizing that all blinds on a single Model 8000 head rail will operate simultaneously from one motor. And note that there is an additional charge for this type of fabrication.

Today, practically any size, as antennas the size of grapefruit and weighing 5 pounds or less are available. A circumnavigating rowboat has been fitted.

Our website and software are continually being improved, and because of this sometimes things just do not work right. It is very important to us that you report any bugs, glitches, or things you would like to see improved. To do this, go to the forum sections titled "Bug Report" or "Suggestion Box", and leave a comment in the appropriate location. We check them very regularly, and make the necessary corrections as quickly as possible.

Answer: There is no technical limitation on size. Rather this is a question of economy of scale. We really don't know yet what the economics are for small scale applications, e.g., in the range of 10 kilowatts or larger. The numbers we have generated in our economic reports are for large plants, e.g., 100 MW electrical. However, the long term market for small-scale applications could be quite large.