Yes, because the SignaLink doesn't require a connection to the computer's serial port! Unlike other interfaces, the SignaLink never requires a serial port connection. This is particularly handy if your computer doesn't happen to have one! In addition to simplifying your installation, this feature also reduces the likelihood of the computer's RF noise getting into your radio. It also eliminates serial port related transmit problems that plague other interfaces.

The SignaLink SL-1 and SL-1+ only pass audio signals to and from the sound card, so they will work with ANY sound card that has a microphone input and a speaker output. The SignaLink Model SL-1+ also works sound card Line Input and Line Output jacks for greater flexibility. What you should really be asking is if the software will work with your computer and sound card.

The SignaLink SL-1 will work with ANY transceiver, receiver or scanner, that has an external speaker output and a microphone input (required for transmit only). The SignaLink SL-1+ will also work with your radio's Data and Accessory Ports. Unlike many interfaces the SignaLink does not require VOX capability, so it is perfect for that little QRP rig! Specific radio requirements are dependent on the software you choose and the modes that you wish to operate.

Yes, it will. A program called Multimode will let you run PSK31, RTTY, Fax, WeFax, SSTV, ACARS, Packet, DTMF plus some other interesting modes. New software is being developed all the time. See our SignaLink Software page for the latest information.

The SignaLink is not frequency dependent so it will work on any frequency your radio can operate on. The SignaLink only controls the signals going in and out of the radio so it does not affect the actual operating frequency. If your radio can receive the signal, the SignaLink will deliver it to your sound card for processing!

Some laptop computers don't have serial ports, but they do usually have at least one USB port. There are a number of very inexpensive converter cables available. They use a device driver to create a serial port under windows operating system. The driver that comes with the converter cable must be compatible with your version of windows of course, and the USB ports must be functioning, both in hardware and in the operating system and in the drivers for the convertor cable.

When you type a serial number into Phantom 2.5 and click the OK button, Phantom will should accept the number and display a message indicating so. If it does not accept the serial number, the computer will beep. The entry box will remain allowing you to re-enter the number and try again up to five times. If your serial number is rejected, you may have mis-typed it or it may not be valid. If you will be typing the serial number, remember that the serial numbers are case sensitive.

Your Serial Number is shown in the Order Confirmation that was automatically emailed to you when your credit card transaction was approved. In addition, your Serial Number is branded on the opening display (the loading screen) of your product. To locate your Serial Number, boot your PC with your #1-TuffTEST product. As soon as the Loading Screen appears press the [PAUSE] key. This will freeze the display so you have enough time to copy it down.

Your keyboard will still work if you unplug your Reader from the serial port. However, the Reader in the Reader Keyboard will not communicate with the PC if the serial plug is disconnected. If you unplug the Reader or Reader Keyboard from the keyboard port, your keyboard will not work.

The serial port should be located on the back of your computer. An example of a serial port image is provided here.

The IBM ThinkPad also has a IrDA port that can collide with your serial/COM port. The best way to solve this problem is to disable the IrDA port. This can be done in the Device Manager (varies per operating system version). While you're there, verify that the serial/COM port is enabled. When asked, reboot the PC. This will re-enable the serial/COM port. After the computer reboots, return to the Device Manager and determine which port number the serial/COM is now on.

Yes, you can connect LabPro directly to the USB port on your iMac, iBook, G3, or G4 Macintosh computer. You do not need a USB-to-serial adapter. If you are using newer versions of Windows, you can also use USB. Windows 95 does not support USB, but it can use LabPro via a serial connection.

You will need to add a serial port to the computer to be able to connect it to a TNC. There are several companies making serial port adapters that connect to the computer through the USB port. Most require that the operating system in the computer be Windows 98 or later (or a Mac OS). Once that serial port has been connected to the computer and recognized by the operating system in the computer, it should be available for any Windows (or Mac) terminal program to use to communicate with the TNC.

Answer: During hookup make sure that you are installing your PS/2 mouse with your system powered off, otherwise you could permanently damage the Motherboard.

A#8.15: This is usually caused by serial port configuration problems. Common symptoms may be: % copycat .ttyco .ttya Error opening tty .ttya, aborting. or % /usr/sbin/getty 8bit.38400 .ttya getty: .ttya: I/O error The first thing to check is that the following GNO serial port drivers exist: /dev/modem /dev/printer Next, ensure the following two lines are in your /etc/tty.config file, and that they are uncommented: modem 2 .ttya printer 1 .

A000030: If you use the serial port for printing or plotting you need to put the DOS MODE command into your AUTOEXEC.BAT file to set up the serial port before you run DANCAD3D.COM (tm) (if DOS MODE is in your AUTOEXEC.BAT file your serial port will be automatically set up each time you turn your computer on.) Some plotters require a "NUL MODEM" type serial port cable to operate.

After treatment, the eyes go through a natural recovery period. For 97% of patients, the results reach the target standard of vision - or better. A few people do not quite achieve the desired standard of vision - for these people, a re-treatment can be one option. Remember all your aftercare is backed up by our unique Lifetime Care Guarantee.

If your questioned hasn't been answered here go to the Orbiter Forum and ask for help. All the questions and answers on this page came from the forum..