Yes it is. We will routinely repair any damage as part of the resurfacing process but if you have small chips or damage on an otherwise good surface we have a solution. We get many calls from people who have dropped tiles, metal plugs or loose objects into the bath and chipped the surface. If this is the case then don't worry, it is easily repaired! We can repair the damage ourselves to a very high standard or provide you with a DIY enamel chip repair kit in the colour of your choice. See similar questions...

With an oiled floor, just take a bit of sandpaper and gently rub away the scratch until it has disappeared. Then apply oil and allow it to sink in. Buff it gently. That's all. A lacquered floor will need to be completely sanded and relacquered as it cannot be done in small patches. Laminate floors are not real wood floors, but plastic printed with an image of wood. Once scratched they cannot be repaired. See similar questions...

If the damaged area is smaller than an inch in diameter you can use ColorFill Putty to repair the defect. If the damaged area is too large replacing the plank may be required. See the Installation Guidelines for additional information and recommendations. See similar questions...

United States Supply maintains a stock of our most frequently ordered products; particularly with regards to Squeegee, Rubber Belts, Felts, Conveyors, Cheesecloth, Dalo markers, Roll lagging, and Leader tapes. If the product ordered is a stock item, we pledge to ship Domestic orders the same day ordered, if the order is placed before 2:00 PM, EST. Note: Export shipments generally require additional time for paperwork, scheduling bookings, transit to port, etc. See similar questions...

The answer to this question obviously depends on the severity and type of problem and, sometimes, what odds one is willing to take. Some patches, for example, are a high risk, but, nonetheless, still performed as the Belt has a lot of useful rubber remaining. Surface - Cracks on the surface of a Belt, if they are not too numerous or extensive, can be patched using a special repair compound available from United States Supply Co. Please see our Rubber Belt Repair Instructions. See similar questions...

Granite is a very dense material that under normal conditions will not chip or scratch. Only in cases when a direct hit occurs with a hummer or other objects may cause to chip. See similar questions...

Granite is one of the hardest stones available. It cannot be scratched in ordinary use; even a knife blade will not scratch it. It can only be scratched with specially sharpened tools designed to work with granite, like tungsten and diamond tools. Granite will chip only in cases of severe abuse with a hammer or impact tool. In the unlikely event that your granite is chipped, the mark can be filled with a granite dust and epoxy mixture. Granite will not crack with ordinary use See similar questions...

Once you have your precious parts powder coated, you will never be able to have repairs (chips, scratches, etc.) redone in powder, without tanking it apart, stripping and recoating. You can have a small touch up kit made by your local automotive paint supplier "made to match" as close as possible. See similar questions...

No. The contractor is not allowed to resurface any private driveways. The equipment is extremely heavy and could damage most driveways. See similar questions...

There are two options if your bath is just worn. The enamel feels rough to the touch and this tends to occur in the base of the bath. You can have it re-enamelled. See similar questions...

In most cases: YES. By wrong BIOS-Updates, CIH-Virus, Power failure, or if the PC hangs while updating. But, if you have bought a used Mainboard and the first Boot shows a blank/black screen, it don't must be the BIOS-Chip. It could be every part of your Hardware. Please contact first the Mainboard-Seller. least, it could be that the Chip is defective and must be replaced. (see also her: The repaired Chip is back, but it doesn't work?) See similar questions...

It depends if they are chips (small pieces of paint broken out with primer or metal visible at the bottom) or scratches. Chips can be carefully filled in with touchup paint, assuming that the dealers ever get some in stock The process is pretty simple, but requires some practice for best results. Clean the chip out carefully to remove any dirt, wax residue, or loose paint. Then use a fine artist's brush or a toothpick to apply a SMALL amount of touch-up paint to the chipped area. See similar questions...

It’s not recommended. The coefficient of expansion for concrete is different than that for asphalt. The failed areas telegraph through to the new surface of asphalt, cracking not only at the site of the cracks you wanted to repair, but at the expansion joints as well. See similar questions...

The Children's Health Insurance Program, or CHIP is a state health insurance plan for children. Depending on income and family size, working Utah families who do not have other health insurance may qualify for CHIP. See similar questions...

Use a touch-up marker, a wax pencil or colored putty to minimize the damage. View our hardwood installation and warranty page for more information. See similar questions...

High quality wood fillers are commonly available and are recommended to repair chips or gauges in your floor. See similar questions...

A properly repaired chip will almost certainly pass inspection - This is because a properly repaired chip is almost invisible to the unknowing eye. If a chip is in the driver's line of vision and is still visible it may not pass in some states. We recommend that our customer service representatives advise you based on your specific locale and orientation of the chip. See similar questions...

soon as at a ship yard carry out repair works ? "repair" is getting improved (only with the one who is the skipper of the ship, so, it is reasonable, when visiting a ship yard to change ships under various skippers commands to improve this useful function). Repair is growing proportionally to the restored hits of the ship: it is possible either to repair the ship completely or step by step ? the aggregate growth will not change. See similar questions...

In a technical sense, no. For example, Federal and State laws prohibit us from saying that removal of all negatives can be guaranteed. Yet, by the same token, any information, no matter how accurate, which cannot be verified within a reasonable amount of time, according to law, CANNOT be included on your credit report. Our job is not to repair your credit....but to repair the reporting of your credit! See similar questions...

Answer: This software program, AMERICA'S CREDIT BUILDER, guides you, step-by-step, through the full and unlimited exercise of your rights under federal laws to repair your credit. Remember that everything is handled by the software, so your "work" is greatly enhanced and reduced. Many of your rights pertain to the Fair Credit Reporting Act, a.k.a. FCRA. The FCRA passed congress in 1970 to protect the American consumers rights regarding their credit. See similar questions...