All of Onkyo??s AV receiver are high current power design and its can be drive most of the speakers in the market. However the speaker system has its own specification with difference power requirement. Also difference brands speaker system has its own characteristics. So you are better to consult with the dealer and listen the sound performance you are searching for.

All of Onkyo??s products are come with the both English and Chinese instruction manual. Every user can easy to setting up the system guide by the instruction manual. If the user facing any connection of operation problems. Who can be contact with our Customer Service Center through by either telephone or e-mail. For contact details, please refer to the Customer Support webpage.

To connect the audio output from the computer to the AV receiver, you need a stereo mini-plug to a stereo RCA pin cord. Then connect the line-out from the computer sound card to an available audio input on the receiver. Select the input and adjust the volume output from the receiver.

The short answer is don't try if you are new to home cinema as the back of one of these machines can be very scary. If you are determined to do it yourself then talk to your dealer first to make sure you have all the right cables for your system, then carefully consult the handbook to ensure you have everything in the right place. You will then need to balance the speakers and set up the sound levels.

The Receiver/Speaker is designed to function as a power back up in the event of a power outage. The Receiver/Speaker battery will function for up to 2 hours depending on the amount of speaker activity.________________________________________

The Sensor/Transmitter can be set to activate an unlimited number of Receiver/Speakers. ________________________________________

The Receiver/Speaker is designed to function as a power back up in the event of a power outage. The Receiver/Speaker battery will function for up to 2 hours depending on the amount of speaker activity.

Range from the furthest Sensor/Transmitter to the Receiver/Speaker can be improved significantly by using a Receiver/Speaker and a Transmitter as a repeater. The furthest Sensor/Transmitter sends a signal to a Receiver/Speaker and the "C" relay triggers another Transmitter to send its signal to a further Receiver/Speaker. This solution can be expanded indefinitely as long as there is power available at the site of the repeater station.

Yes. A Sensor can be programmed to trigger recorded messages from one or more Receiver/Speakers (Base Units). For example, suppose you were a Retailer and placed 1 Sensor by the front door. When the Sensor is triggered, you could use one Receiver/Speaker to play a message such as "Welcome to my store. Let us know how we can help you." The same Sensor triggers a second Receiver/Speaker in the back office, notifying staff someone is in the store with the message "A customer is out front.

No, you may only choose a topic for your presentation. After you provide your desired topic, date, time and location information we will match your request to available speakers, preferably in, but not limited to, your area.

To get audio from your TV through your AV receiver, please connect stereo audio cables from an available AV input on the rear of your receiversuch as D-TV/LD or CBL/Sat. Then refer to your TV owner's manual for more information about audio output to an amplifier. You may have to turn off the internal TV speakers in order to get any output from the TV into the AV receiver.

The Sensor/Transmitters will transmit a signal in an open area up to 1000 feet to the Receiver/Speaker. Through walls the Sensor/Transmitters will transmit a signal to the Receiver/Speaker up to 300 feet.________________________________________

There are four "C" relays (aka terminal outputs) on the bottom of the VA-6000S Base Unit. When a Sensor is triggered, you have the option of activating an external device hooked up to one of these dry contacts (in addition to playing the message alert). The four terminal outputs (labeled NO.1 -> NO.4) correlate to message Zone #1 -> Zone #4 on the Speaker/Receiver. Note: These "C" relays do not provide power but function as a switch.

Midwest Speakers Bureau, Inc. will issue a contract. We require a 50% deposit in order to hold the date. The balance is due just before the appearance, and speaker expenses will be billed afterward. You will receive the speaker’s pre-program questionnaire so the speaker can customize your program. We will provide you with a detailed, comprehensive itinerary outlining all pertinent details for your program.

Yes, many Yamaha AV receivers are stable down to, but not below 4 ohms. We recommend that you use only speakers with a minimum of 4 ohms. Also, please make sure that the impedance selector switch is set to the correct position as recommended by the owner's manual.

You typically have two options when connecting a powered sub woofer. Input (1) on the rear of the sub woofer would be used when connecting the sub woofer to the receiver using speaker wires. You would then connect the main speakers to the opposite end, or output or the sub woofer to the main speakers. Option (2) would be using RCA line level output jacks, input (2) on the rear panel of the sub woofer directly to the single sub woofer output on the back of an AV receiver.

In most cases, your TV may only have one set of video inputs. If this is the case then you are limited to the amount of video product that you can connect to the TV. By connecting all your audio/video components directly to the receiver, you would only have to use one video cable from the receiver to the TV. This in turn simplifies the connections, which makes video switching easier.