NTSC is the North American standard format for videos. North America includes both Canada and the USA. PAL is the standard format in Europe for videos. Most European machines can play both NTSC and PAL formats now. You will have to check with your area to find out what format you require. Our DVD's are only available in NTSC but most current machines will play both versions. You'll have to check your specific DVD player to be sure.

_We know the exact format to send you depending on where you're located. For your information, most of the European DVD player can play both PAL and NTSC formats. But in order to obtain the best possible quality for our customers, we make our master copies in both PAL and NTSC.

Different countries use different methods of recording and playback. Please go to Video Standards for a complete explanation of this.

DVD-V has the same NTSC vs. PAL problem as videotape and laserdisc. The MPEG video on DVD is stored in digital format, but it's formatted for one of two mutually incompatible television systems: 525/60 (NTSC) or 625/50 (PAL/SECAM). There are three differences between discs intended for playback on different systems: picture size and pixel aspect ratio (720x480 vs. 720x576), display frame rate (29.97 vs 25), and surround audio (Dolby Digital vs. MPEG). (See 3.4 and 3.6 for details.

PAL format is the kind of video standard that is used in many European Countries. NTSC is used in the United States and many other Countries like Japan for example. PAL has nothing to do with the actual videocassette...VHS is a world standard. PAL has to do with the output Hz of the local electric company therefore affecting the speed at which your TV will be refreshed/drawing on the screen. If you are in doubt, call a local TV repair store; they will give you the correct option to order.

No. All of our videos are NTSC format - - PAL and SECAM are not available. This is an important question, because WE DO NOT GIVE REFUNDS FOR PEOPLE EXPECTING PAL OR SECAM VIDEOS

There are two basic formats of television signal. In the UK and Europe (and Japan) the standard is called 'PAL', yet in America the standard format is 'NTSC'. DVD discs can be encoded in either of these two formats, and this should not be confused with Region Coding as this is something completely different. In almost all cases, NTSC discs can be played within the UK and Europe without any problems.

These are two different TV picture standards. Region 2 (Europe) uses the PAL standard whereas region 1 (USA and Canada) uses the NTSC standard. These standards are incompatible with one another and to be able to view a region 1 DVD on a UK TV, you'll need to have an NTSC compatible or multi-standard TV.

Remove Video Studio, then re-install the software again. During the installation, you can select the video format to be either PAL or NTSC formats. ( refer to graphic) Since the controls of PCI interface are disabled under Windows XP/2000, a new PCI card cannot be installed into your system. Please follow the installation procedures below:

InfoView supports both the NTSC and PAL formats. NTSC is used in the U.S. and by many countries on the American continents as well as many Asian countries, including Japan. PAL is used in most Western European countries, except for France. SECAM is used in France and many Eastern European countries but is not currently supported by InfoView.

PAL and NTSC are the television standards for different parts of the world. There is also a third - SECAM. NTSC covers the United States, Canada, Japan, and a few other places. SECAM covers France and Russia. PAL covers the rest of the world. PAL, SECAM, & NTSC are basically a different way of displaying the picture on the television. The main differences are in the number of horizontal lines displayed on the screen, and the number of frames per second displayed.

Can I read/write PAL video on an NTSC camera, or the opposite, via firewire? Johnson Ching reports that you can freely read and write PAL or NTSC tapes on either a TRV900 (NTSC) or TRV900e (PAL) camera through the firewire. Here is a letter from Jerome Maro explaining the situation: What I understand about how those cameras are working is the following (tested with a PAL TRV900 and also a PC-1 (also PC-100, tnks James)). If you have a DV cassette recorded at 25 p/s (from a PAL camcorder..

This question is particularly important when buying VHS tapes. If you live in North America or Japan, your VCR is (most likely) set up to only play NTSC VHS tapes. If you live in Europe or Australia, your VCR is (most likely) set up to only play PAL VHS tapes. There is also another Region Code Called SECAM that is used in parts of Africa and Russia, but these are not carried by Freedom Footbags.

NTSC and PAL are two different video standards used by countries around the World, and the two standards reflect how many horizontal lines run across a TV set to comprise the video picture. A VHS tape, DVD, or TV is either NTSC or PAL. The United States, Canada, and Japan use NTSC. Britain and many European countries use PAL. Unfortunately, the two are not interchangeable. So for example, if you got a PAL tape from your cousin in England, it would not work on your VCR and TV.

PAL:- Is a format widely used in Europe, Australia, Asia and Africa. PAL stands for Phase Alternation Lines and has various sub-systems for VHF and UHF bands for each country. SECAM:- Is mainly used in Eastern Europe and France (SECAM-L) SECAM stands for System Electronique Couleur Avec Memoire was founded by Frenchs. NTSC stands for the National Television Systems Committee who developed the system and public broadcasting of NTSC began in the United States in 1954.