QueryCAT Logo
Search 5,000,000+ questions and answers.

Frequently Asked Questions

How much Prime pH should be added to water?

dreddyclinic.com: The Alkalarian diet FAQ page 3
In distilled water? It is recommended to add Prime pH drops to all water, including distilled or reverse osmosis. The drops increase alkalinity and oxygen levels in the water, promoting an internal environment in which invaders like yeast, fungus, mold, and bacteria cannot survive. According to the label, one should add 3-5 drops to 8 ounces of water. Add about 6 drops in 16 ounces or one-half liter, 8 drops to a quart or one liter, 10-12 drops in 64 ounces, and 24 drops in one gallon of water.

What is the pH (acidity level) of my water?

Water Quality FAQ, Answers to Your Most Frequently Asked Wat...
All wells in the system in both Grimes and Montgomery Counties are tapped into the same aquifer and consequently have a close pH range of around 7.1 - 7.27. (Note: pH is measured on a scale of 0 to 14. A pH of 7 is neutral, a pH level above 7 indicates alkalinity, and pH levels of less than 7 indicate acidity.)

How does Essentia Water increase pH level to between 9.2 and 9.7?

Welcome to Essentia Water
Essentia Water uses a proprietary process called Ionic Separation. There are two ions in water. One is negatively charged (alkaline) and the other is positively charged (acidic). This process uses electrolysis to electrically split water into alkaline and acidic streams. We bottle only the alkaline stream. In doing so, we are bottling the water that has had the acidic ion removed, which naturally raises the pH of the remaining water.

How much Prime pH should be added to water? In distilled water?

The SuperGreens & pH Miracle Site: Frequently Asked Question...
It is recommended to add Prime pH drops to all water, including distilled or reverse osmosis. The drops increase alkalinity and oxygen levels in the water, promoting an internal environment in which invaders like yeast, fungus, mold, and bacteria cannot survive. According to the label, one should add 3-5 drops to 8 ounces of water. Add about 6 drops in 16 ounces or one-half liter, 8 drops to a quart or one liter, 10-12 drops in 64 ounces, and 24 drops in one gallon of water.

How does raising my pH level affect my health?

Coral Calcium - Frequently Asked Questions
It is well known that the body fluids of healthy people tend to be more alkaline (high pH) and the body fluids of sick or diseased people are acidic ( low pH). Healthy blood, spinal fluid and saliva are normally at a pH of 7.4. This alkaline state is necessary for cell growth, cell function and cell repair. It has been proven that cancer cannot grow in an alkaline solution because an alkaline solution will hold oxygen at a high level (Cause and Prevention of Cancer, Biochem Zeits, 152: 514-520).

What is a "bought as seen" Product?

Products that are bought as seen are supplied without warranty. We process large volumes of IT equipment some of which we are unable to test, some of which we are not qualified to test and others that are not financially viable to test. They are all ex-corporate items and were covered by a fully serviced maintenance contract whilst in operation and have come straight from the users desk to our warehouse. Some of the items may appear to be faulty because of the above reasons.

What pH level does the AQ-4000 bring to drinking water?

FAQ - AQ-4000 Water Filter
The AQ-4000 will reduce TDS, iron, and rust down to .5 microns (40 times smaller than what is visible to the human eye).

how do i level out the ph in water 4 a hydroponic unit?

What are some good hydroponic resources? - Hydroponics Onlin...
Hi, I'm doing a science project on hydroponic farming, using the Water Culture method, i need to know how to get the best results, especially with pea plants & carrots, if anyone can give me some advice, than post it on the bulletin board, please address it to J.S. of Fl hi ! i am interested in starting a hydroponic vegetable garden as a business, what size should the garden be to be commercially viable ? would appreciate a reply.

Q14. Which level of pH should I keep when drinking alkaline water?

Water ionizer FAQ2
the level of 8.5 to 9 of pH value, water is best absorbed into the body. However, neutral tap water or acidic water produced from a R/O system may not be suitable for you temporarily due to large difference of mineral content. Therefore, it is recommendable to drink water on stage 1 (pH value is 7.5 to 8) initially, and then drink ionized water in which pH value is 8.5 to 9 (generally, on stage 2 at home depending on water pressure).

Which pH factor should a good drinking water possess?

Himalayan Living Salt Frequently Asked Questions
The pH factor should be close to neutral (7). Any pH between 6.5 and 7.5 is good. Remember, 1 is very acidic and 14 is extremely alkaline. Only salt mills and grinders having metal grinding mechanisms will cause a reaction with the salt. Ceramic mills and grinders are recommended.

What is the pH of our water?

NESSWD |- FAQ
The pH of the three wells in the Evans Creek valley is 7.0. The two wells on the plateau have a pH of 7.6. A pH of 7.0 is neutral.

I just bought a house that has a spa. I've never owned one before, how do I operate it?

message board FAQ : questions and answers
This question is so general, it's almost impossible to answer through a text conversation. The best suggestion would be to call a local service technician. They can come out, go over the entire system to make sure it's operating safely and properly, and walk you through everything that's necessary to operate and maintain your spa.

Why are minerals added to Nursery® Water?

Nursery® Water - Frequently Asked Questions
Calcium, magnesium and potassium are added for taste. At the levels used, they do not provide any nutritional benefits.

Why is it important to maintain proper pH?

NEW LIFE ENERGETICS
Pollution, stress and our consumption of coffee, alcohol, carbonated beverages, meat, dairy products and highly processed foods tend to create acidic body fluids. The optimum pH of the body should be slightly alkaline or around 7.4. Pathogens, including viruses, bacteria, fungi and yeast thrive in an acidic, anaerobic environment.

What's the proper moisture level for optimal smoking?

G. L. Pease - Frequently Asked Questions
This is partially a matter of personal taste and smoking style. Generally, a tobacco that is just pliable is ideal for best smoking. If it's too moist, it will be difficult to light, difficult to keep lit and will provide a dilute, "steamy" smoke. This is one of the most common causes of "tongue bite." If the tobacco is too dry, it will burn rapidly, and regulation of the ember can be difficult.

How long will the ionized water maintain its pH Level when stored?

Frequently Asked Questions About Water Ionizers and Ionized ...
Over time, when alkaline water comes in contact with air, the water's pH will start to revert to back to a neutral pH of 7. Simply put, the minerals contained in the water will start to precipitate into solid form when the water is in contact with carbon present in the air.

What is the SPA Water Maintenance Northman Style ?

message board FAQ : questions and answers
To begin with, it should be noted that "Northman" is a frequent posted to our message board. The following is his personal recommendation for water care. The information below is the result of over 10 years experience as a spa owner and a desire to find an effective method of spa sanitation which is simple but effective and leaves very little if any chemical odor.

How do I fill up the spa with water?

Relax Spas - frequently asked spa questions
Use your garden hose to fill the spa. It is best to run the hose first for a few minutes to flush out any stagnant water before filling the spa. There is no special plumbing required for a Relax Spa.

What is pH?

Welcome to Good Earth!
pH is a measure of the acidity ("sourness") or alkalinity ("sweetness") of soil. The scale ranges from 1 to 14, but few soils are more acidic that 5 or more alkaline than 9. A pH of 7 is perfectly neutral, but most plants grow best when the pH is a slightly acidic between 6.5. Soils in areas with low rainfall tend to be alkaline. Where rainfall is high, soils are more often acidic. This happens because rainfall gradually washes calcium from soil.

Why can't I see the gammas I added to the top of my level scheme?

RadWare Frequently Asked Questions (FAQ)
When you keep adding levels and gammas into the level scheme window, the level scheme will eventually go off the top of the level scheme graphics window, and you will not be able to see the top of the level scheme. When this happens, you need to use the RD1 command, or select "redraw entire level scheme" from the display menu. It will recalculate the level scheme limits and redraw.
More Questions >>

© Copyright 2007-2012 QueryCAT
About • Webmasters • Contact