The Dura-Crib is an injection molded "Lexan" N.A.S.A. plastic product. Lexan is used in bullet-proof glass and astronauts' helmets. The wooden crib is made out of North American white birch and white maple (both hard woods). They are made in America by Americans who receive a fair wage. Yes. Normally, we charge a 35% customization fee. Once the material has been ordered for a Custom Order, Client is responsible for material(s) even if the order is cancelled.

A/: Dura Seal is specifically designed for hardwood floors and for the most part, is primarily sold to professional floor sanders and finishers. [top] A/: Yes this is a two-part question, on gymnasiums that are true sports floors we recommend Gymthane. For multi purpose floors such as stages, dance floor's, museums, Penetrating Gym Treatment is the product recommended. [top]

Hardwood Protection is clear vinyl, which allows the beauty of the hardwood to be seen while it is protected. Dura Runner Plus is available in both gray and brown fabric, with non-slip backing. Hardwood Protection is 27" x 100', while Dura Runner Plus is available in two sizes, 32" x 50' and 32" x 100'. Dura Runner Plus is more versatile and may also be used to protect marble, granite, concrete, vinyl, tile, terrazzo, most natural stone floors and other hard surfaces.

Clear-Lay is a vinyl based film that is very economical, easy to cut, has a low heat tolerance and is acid free. Dura-Lar is a polyester based film known for its clarity and stability. It has a high heat tolerance, will not tear or discolor and is archival. Acetate is a general purpose film that tears easily, does not have a high heat tolerance and is NOT acid free.

A drop gate crib has a split front and the top of the gate actually folds down so that you can reach the child in the crib. A drop side crib has a front that actually slides down to gain access to the child. A stationary side is solid and does not move. Usually, in stationary side cribs, the front is lower to begin with and you have more mattress height adjustments.

The floor should be sanded to abrade any remaining finish, and then thoroughly washed with a powdered cleaner such as Spic-n-Span. Use water as sparingly as possible, and allow the floor to dry thoroughly. Once you are certain that the floor is dry, apply one coat of Hollandlac Oil Primer and allow to dry for at least 24 hours. The floor should then be lightly sanded with a 150-grit paper to the desired level of smoothness, vacuumed and tacked dust-free.

Early racquets date back to the 14th and 15th centuries and were used in games that resembled squash more than modern-day tennis. The heads of these racquets were more oval in shape and smaller than today's racquets, and the handles were very long. The game of tennis as we know it today and its equipment got started in the late 19th century in London, England. In 1874, Major Walter C. Wingfield patented the rules and equipment for a tennis game played outdoors on grass lawns.

Initially I used brass inserts and machine screws to attach modules to the cabinets. Often the brass insert would break the wood and I didn't want to change the panel flange dimension because I like how it looked from the front. Another option was to use a metal bar with machined and tapped holes but the price of this piece (and you need 2 or 4 for each cabinet) was way too much. After much debate with myself, I did many experiments with pre-drilling the wood and using wood screws.

The standard for crib slats was to be no more than 2 3/8th inches apart to prevent your baby from slipping through or getting their head stuck. Also, double latches for drop-down sidebars were to become the norm. The standard for cutouts in the crib end panels are presented. The end panels must not have any decorative cutout designs. Children were getting their limbs or heads caught causing serious injury or death.

Place your baby on his back or on his side for sleeping. Use one piece sleepers rather than blankets. Your baby could slip under the blanket and possibly suffocate. Remove all pillows and toys as well, in order to prevent suffocation.

In order to keep your baby's a safe place, you should make sure to all connections are secure and that there are no broken or missing parts. Regularly, check the teething rail for splits or cracks. Make sure the mattress spring support and your crib will withstand your baby's increasing mobility. The mattress itself should have no splits, tears, or holes.

We have a Graco playpen/crib/changing table or we can assist you in renting a crib for your stay. The closets in two of the bedrooms are large enough to accommodate a crib.

tools for assembly and if a crib is broken, the renter is responsible for replacing the crib at a cost of approximately $300 per crib.

A/: Dura Seal is the professional division of Minwax which includes a complete line of quality hardwoods floor products such as Stains, Sealers, Polyurethane's, Water Base Finishes, Wood Fillers, Wax's & Floor Cleaners. [top]

No, these] are the water flumes (walled tunnels, with a floor, walls, and a roof, of wood) that used to take water from the Truckee to the electric plant just West of Verdi. A flood washed out the flume East of Floriston a few years back, now just a trickle of water goes thru them. The wooden strips you saw, consist of 2x6 strips of Douglas fir, placed 3 feet apart. The workers walked on those strips of wood to repair the flumes, following the winter damage.

Our wooden belts are constructed to put the over lap in the inside of the belt. This gives you the advantage to be able to wear the belt from 1 - 10 inches more than your waist. If you notice your current belt, it probably overlaps on the outside. This does not allow you to have the versatility of changing the length of the belt, especially when you over indulge and add a few pounds, which we all have the tendency to do.

With many wooden slats the belt bends easily. You can bend your body with the wooden belt and not even notice you are wearing a belt. In fact, people go skiing and bowling while wearing their wooden belts feeling very comfortable.

Most building departments will not allow direct mounting of the posts to a wooden deck. However, there are some building departments will allow attaching your deck. Each municipality will have there own requirements. Are going to obtain a building permit to install your awning? In all instances, it is not permissible to mount the awning posts to a handrail of any deck.

Where featured the wooden bases are including in the cost. All our stands are hand-turned in a part of our own workshop, when you order a set of candles the stands are made from a single piece of timbe so they all match.