No. All FireWire CCD cameras, manufactured by The Imaging Source get their power via the FireWire interface.

All The Imaging Source FireWire astro CCD cameras have standard a C-Mount. You can purchase adapters for various telescope mounts at your local telescope accessory store.

The Imaging Source manufacturers FireWire cameras. We do not offer any individual consulting at system level. The following recommendations are only general in nature. The responsibility for the correct usage of the camera lies in the hands of the on-site engineer. The Imaging Source does not take any responsibility for errors, loss of data or other damages that are the result of these recommendations.

Y800: Camera based color interpolation is turned off and the raw color data stream from the CCD is outputted in the monochrome format Y800. The camera control software IC Capture.AS displays color images in their raw form. Therefore, they appear to be monochrome at first sight. This mode is not suited to visualization applications. However, should you wish to capture an uncompressed AVI file, you should use this mode. BY8: the structure of this format is equivalent to that of the format Y800.

Yes. However, you may need to purchase a FireWire interface card for your laptop. When choosing such an interface card, it is important that it can also supply the camera with power. Usually, you will need to connect an external power supply to the FireWire interface card in order to power the connected camera.

No, the 810 and 820 series meters operate in using a "single ended supply" meaning you only need between 9 and 25 VDC to operate them. We sell very reasonably priced power supplies that accomplish this in a very economical manner.

The main purpose of your power supply is to run your trains. To run your train your power supply must supply energy for your locomotive, smoke unit, sound system , and any lighted cars. You may also need power for accessories like switches, street lights, building and house lighting or any other accessories. Your TOTAL POWER REQUIREMENTS depends upon the number of locomotives or motors, and ALL OTHER items that require electricity. The length of the track is not a factor.

Check our supported FireWire cameras section for the current list. Note that since FireWire and DCam are standards, many cameras not on this list are supported.

You are not locked in to any supplier. Any deal you find can be your source. Our best wholesale-to-distributor warehouses are out of New York, Texas and California. Most will ship the same day.

Would have been a lot more if not for all the developers, programmers, skinners, electrical gadget makers and posters/members with the needed advice and help on these forums. VIA MII 10000|WD160 GB|Audigy2 NX||512Ram|Orinoco Gold Wifi|Motorized In Dash lilli|GPS Rikaline 6010|Opus 150|Sirius Radio|Nvidia FX5200 PCI|

The AC Power Adapter required to power the film drive is a dual voltage power source +5 (1.1A) and +12(1.3A) VDC provided from one universal 120/240 50/60 cycle AC adapter.

This is the size of a camera sensor's active area. The smaller the dimension, the more "work" the camera will have to do to present a monitor sized picture. A 1/4" CCD will have to magnify the image more to show the image on the monitor. A 1/3" CCD will need less magnification to show the image on the monitor. A 1/3" CCD will cost more and have a better image. Both types are adequate for reaview systems.

Yes. If the Roll-Up III connects via serial port, the external power supply is needed to ensure the digitizer has a constant power source. This is especially true if you are using the digitizer with a laptop computer. The power supply is not needed if the Roll-Up III connects via USB port.

Yes. Although the Roll-Up does get some power from the computer, the external power supply is needed to ensure a constant power source. This is especially true if you are using the digitizer with a laptop computer.