In the new navigation software, data transfer from Computer to GPS Unit also operates via via USB for Garmin receivers. Although Suunto units can also be connected via USB, a COM interface is emulated here by the Suunto driver software. Installation of the Suunto driver is therefore a prerequisite for data transfer taking place.

In the case of Magellan units with their own hard disk, data is exchanged between PC and GPS via the functions Import/Export. The Magellan driver software must be installed on the PC and the data transmission mode must be set on the GPS unit. When data is being uploaded/downloaded, the Garmin units must be set to GARMIN. In Online Mode, the GPS unit must be set to NMEA. The NMEA setting is also necessary for the Geogrid GPS function “GPS Track from receiver”.

A Waypoint is a place or position with a defined coordinate and a name. For example, Your House, the Church, the road Junction, the Marina. A waypoint may have other attributes such as a Symbol (Icon), Height and Comment. Sometimes waypoints are refered to as Points of Interest (POIs). Marina ===> Church ===> Junction ===> House. You might construct a route so that you can load it to your GPS in order to guide you when visiting each waypoint in order.

Waypoints may have eight characters in the name. (Explorist can have twenty.) The first 200 waypoints may have an additional 30 characters stored in 'comments'. (Explorist can have more.) Once those 200 slots have been filled, additional comments are siliently ignored. These limits apply even to the Meridians and Explorist where you can bank switch waypoints via the card utilities. Up to 20 routes may be loaded, each with a max of 30 points. In version 5.

Any GPS that outputs standard NMEA data is acceptable. See DR135 manual for the connection. A required stereo plug for the data port is provided with the DR135TP/TPG or an optional EJ41U TNC unit to install on DR135T/TG.

Yes, just follow the "Waypoints" link in each section to download a file listing all the grid references for the sites included in that section. You may have to do some work on the file as there are many different formats available.

There are several methods to do this. You can select the waypoint that you want to upload. You can delete the waypoints that you don’t want to download. I prefer to use the "Filtering" feature in GPSU. An example is to open the map (), click the "Current Point" () button on the toolbar, next click a point on the map (such as the inlet you will be leaving from), next click the "Filter" () button on the tool bar.

GPS Tool Beta version 1.0- Transfer waypoints using a GPS Current 3.1 user? Download the GPS tool. Click here.] Right now there is no support for the Garmin eTrex GPS unit. As of right now there is no plans for an update to the GPS Tool program.

No, the SRM 66 is a line level device. It will accept levels from consumer - 10 dBV or professional + 4 dBu sources but a preamp, like the MS 1b, is needed between the microphone and the SRM 66.

GPS stands for Global Positioning System. The unit is about the size of a pocket dictionary. It is secured under the bonnet of your vehicle, where it takes power direct from the battery, with no risk of drainage. A small disc antenna also runs from the unit. This attaches discreetly to the outside of your windscreen. It records your position at regular intervals and sends the information by satellite back to our monitoring centre.

You have the ability to send waypoints to a GPS, but you cannot receive them from the GPS. You set it all up in Configuration\Sensors\Manual and select the COM port the GPS in connected to.

The tracklog and route downloading functionality is not yet complete - for now, please use MacGPSBabel (see above) to download your tracklogs and routes to a GPX file and then open them with Terrabrowser. Terrabrowser 1.5 supports drawing of tracklogs and routes, but the older version 1.1 does not.

The most reliable way to have your tracks appear on the page in the correct order is to name the individual files with track numbers, like this: If you have more than 9 files you need to start numbering with 01 - not 1 - otherwise the files will go in this order: 1, 10, 11, 12, 2, 3 etc.

Sorry, it is not possible to delete individual waypoints in your GPS from a PC. The workaround is to download all the waypoints, delete those you do not need, clear all waypoints in your GPS receiver and then upload those that you want to keep. of midnight on the 1st May 2000, SA was discontinued under orders of the President Clinton. Selective Availability was the purposeful degradation of the GPS signal for civilian users.

USB to SERIAL connection for your GPS -How to make the connection by Steven Hitch (link)GPS hardware and PDA mapping software Vista (Scanned, Vector, and Flight Sectional Charts (Link)Links to Third-Party GPS Intermediate Software D Plots by Height -Both 2-D Profiles and Complete Rotateable 3-D Plots for Viewing at Different Angles ExpertGPS displays your waypoints, routes, and tracks on Terraserver USGS topo maps and aerial photos GARTrip -Upload/download to Garmin Receivers, convert GPS data f.

A USB cable and the presence of USB connections are not yet adequate for exchanging data successfully. However, data transfer can be effected using a USB cable if a serial COM Port is emulated by the GPS receiver. The GPS data must be available in the NMEA 0183 format when data is called up online, so that Geogrid is in a position to evaluate these data.

You can send any brand of hairpiece for repair/remake. Please note that there are two things we cannot do: We do not offer re-coloring and permanent wave (curling). Most other repairs can be done for a $180.00 flat rate, plus shipping. However, the factory does not accept all repairs as some requests involve more labor than a new unit would cost. In such cases, we have to decline your repair request and we cannot offer any refunds.

In Options-Preferences-Map Display, turn ON "Show All Tracks". Then in the Tracks or Routes Database list, a checkbox will appear beside each database name. You can select which individual databases to Draw on the screen. In Tracks list, I have all tracks unchecked, so I expect not any track to be displayed, however, the track that was visible last is still roaming my map :-) The track you are recording to is displayed regardless of the this checkbox.

The MapAdvisor menu option "File->Save track to GPX file on card" will create a file in directory /mapadvisor on storage card. This file includes the current track information and all waypoints you see on the screen. You can open a file later in other programs and view the track there. For example, it can be opened with the PC program QuakeMap.

All our orders are shipped within two days of confirmed payment, and have plain packaging. We use recycled packaging material whenever possible. Shipping prices are listed on the "How to Order" page.