It is always recommended to refill the cartridge before it runs dry or refill the empty cartridge immediately. Otherwise, inks may dry out and block the print head that consists of very thin and small nozzles backed by a thermal resistor that boils and cools the ink.

Refilling means recycling your ink jet cartridge, mostly containing the print head on the cartridge itself. Refilling is good for the environment and can save you a lot of money on your cartridge cost, too.

YES! Toner is a nontoxic substance of plastic, iron and a very small amount of pigment (this information was provided by the OEM manufacturers). It’s advisable to perform the Toner Refill in a well-ventilated area, especially when using the melt and the refilling process. It’s safe to refill a cartridge as long as you follow the instructions that we provide you along with our Kit. YES. Our toner has the same gram weight as the original toner cartridge.

HP #40 and HP #45 cartridges use a green indicator on the side to indicate how much ink is left. This green indicator moves out of view when the cartridge is empty and may not reappear after refilling. This is due to the way that the indicator is made. However, you can tell that the cartridge is full by its weight. After refilling, the cartridge will be noticeably heavier than when it was empty.

That depends on your market. However, the following cartridge types represent more than 90% of the typical range: 51626, 51629, 51645, 51641, 51625, 51649, BC 01/02.

Refilling means recycling your ink jet cartridge. Basically you reload your existing printer inkjet cartridge with new ink. Refilling is good for the environment and can save you a lot of money on your cartridges costs.

Using the syringe supplied in your refill kit, inject air into the top air vent to clean the nozzles. A small amount of ink should be emitted from the nozzle upon injection. If this procedure is ineffective, fill a small dish with warm water and soak the nozzles for approximately 1 hour. After soaking dry the nozzle using a soft tissue or cotton swab and inject air into the top vent. Reinstall the cartridge and attempt to print again.

No, refilling your cartridge does not have to be a messy process. Latex-free gloves alongwith cleaning tissues are included in your ink refill kit and it is strongly suggested to refill your cartridge over newspaper or a sink. The main thing to remember in order to have a mess-free, successful refill is to inject the ink into the cartridge slowly since you are displacing air with ink.

Refilling your empty inkjet cartridges not only reduces the burden on landfills, but it also has a positive impact on the world's resources.  Inkjet cartridges are made of plastics. It takes approximately 2.5 ounces of oil to manufacture a new cartridge. It is estimated that 8 cartridges are thrown away every second in the United States. It takes hundreds of years for the plastic to decompose. It just makes sense...recycle and  save!

It depends on the cartridge. The HP 15/45 style cartridges are filled through the printhead due to design, but the preferred method for most cartridges is to fill in a vacuum using the fill holes.

NO! OEM's have threatened in the past to void printer warranties when cartridges are refilled. Legislation has since prohibited OEM's from voiding warranties for this reason.

Because of constantly changing market conditions, cartridge prices are good only for the day on which you received our price list or the day which you were quoted the prices. However, pricing usually does not fluctate radically, so pricing will remain generally the same within a small range.

The print quality you receive from recycled laser cartridge will match the print quality of a new cartridge from the manufacturer. Recycled laser cartridge technology has reached such a competitive level where even the same supplies (such as toners, drums, and other parts) are also used by the manufacturers. It does not make sense to pay more for a new cartridge when you can get the same product, for less money, by using recycled laser cartridges. It protects the environment..

Our toner cartridges suppliers are quality remanufacturer. Cartridges are refilled under maximum precision. Any worn out part in a cartridge are replaced with new parts. The cartridges undergo thorough testing before being shipped out. These cartridges have the same page yield as a new OEM and are guaranteed to work as new.

Why are filters sometimes described in terms of "microns?" Manufacturers commonly describe the size of the pores in filters, and therefore the maximum size particle that will flow through a filter in terms of "microns." A micron is 1/1,000,000th of a meter or approximately 0.00004 inches. Unfortunately, manufacturers rate filters based upon this pore size without applying a standard technique to express the ratings.

A prescription may be refilled by contacting your pharmacy. Once all the available refills have been used, the pharmacist will either call our office or send us a fax requesting a refill. We will process the request within 24 hours from the time it is received by our office and you will receive a confirmation call from our office indicating the status of your request. Refills on controlled substances are typically done during an office visit.