In normal conditions, the gaps between the wood slats and the special mesh base ensure good airflow and quick drying which inhibits mold and mildew growth on the decking. If installed in exterior areas which remain damp and out of direct sunlight, then some growth of mold or mildew may occur as with conventional wood decking

Palkar will, when subjected to extended damp weather, collect mold and mildew. The material however can be cleaned with a solution of mild household detergent and water. with most vinyl products, Palkar will become less flexible in the coldest weather conditions. However, unless subjected to unusual impact, it will not break or crack. Our products have been engineered to accommodate temperatures ranging from -65?F to 120?F.

Because Sierra Stone forms a porus surface water actually drains off to the grade of the substrate and does not sit on top of the surface. Water doesn't puddle up, which means the surface dries fast and is more resistant to black and green mold and mildew ? it is also less susceptible to icy patches in winter.

Since the home does not leak, the only thing that would cause mold or mildew would be condensation. We have no problem with that because an air handling system is installed that circulates and changes the air. The system also removes any build up of radon. Our homes have far less radon infiltration than a conventional home because of the tightness of the structure, and what does come in is quickly removed by the air handling system.

Yes! Germ Doc™ is our E.P.A. registered Mildew stat that kills mold and mildew and the odors caused by them. Use the B.O.S.S. as your cleaner and Germ Doc as your spores and funguses killer. NO! Germ Doc™ is phosphate free, no chlorine bleaches and no phenols. Safe around people, food and pets.

Ans. Mold and mildew start in a cool, moist, dark environment and spread from there. Inside the evaporator coil or the supply plenum of an air conditioning system is a perfect place if the system is low on freon or the evaporator coil is stopped up with dirt. Ultra Violet lights are good for getting rid of mold and mildew.

The most effective thing to do to avoid mold growth in the home is to keep the indoor relative humidity below 45% year round. Use a hygrometer to monitor relative humidity and dehumidify when necessary. Any structural problems that cause leakage should be fixed. Any materials that have been contaminated should be discarded if they cannot be adequately cleaned to remove mold. Molds are not only powerful allergens but they can also release toxins that can cause health related problems.

Vinyl products will, when subjected to extended damp weather, collect mold and mildew. They are, however, easily cleaned with a solution of mild household detergent and water. [Return]

When household goods are in transit, they generally do not remain stationary long enough to be exposed to mold or mildew. Mold and mildew are excluded in this transit policy.

Mold requires nutrients, water, oxygen and favorable temperatures to grow. These nutrients are present in dead organic materials such as wood, paper or fabrics; from wet construction materials including wood, concrete, drywall, carpet or wallpaper; and from some synthetic products such as paints and adhesives.

Mold and mildew can occur when warm, moist air condenses on a cold surface. Many building products will support mold growth, especially wood-based products. Mold in a home can often go undetected since it tends to occur on the coldest surfaces, such as closets on outside walls (especially when the walls are improperly insulated), behind furniture, and in attics and basements.

Vinyl products will, when subjected to extended damp weather, collect mold and mildew. They are, however, easily cleaned with a solution of mild household detergent and water.

Well first remove the mold and mildew with a detergent and grout brush! Then try getting some natural light into your bathroom! Also keep your shower door open ( After you shower!) along with your bathroom door! You may also want to invest in a after shower product like "clean shower" or x-14 after shower spray and apply as directed.

Again, these can grow on dirty surfaces and if this occurs it is not the product that it is failing, it is the maintenance of the product. Maine Deck - GRAND DESIGNS Finalist 2007 for Best ECO Product. Maine Deck(UK)'s range of products include: Im really pleased that there are now such exciting sustainable materials coming onto the market. I am committed to using these environmentally conscious materials where possible to ensure that my designs have a minimal impact onto the environment.

No! All three of the basic elements – moisture, food and oxygen -- MUST be present to support mold growth. Food sources are plentiful. Typically, wood, fabric, wallpaper, carpet padding paper-faced panels and other similar building products contain sugars and starches, which can support mold growth. In any interior structure, food sources to support mold growth are plentiful. Likewise, it is impossible to eliminate the oxygen source.

Mold needs three things to grow: food, water and the right temperature. Unfortunately, mold thrives in the same temperature range that humans generally prefer (48°F to 70°F), and mold feasts on components of wallboard, carpets and other common household furnishings and construction materials. Thus, the only real way to control mold is to eliminate its water source.

Mold spores are everywhere. They are in every bit of air we breathe. Outside air will contain less concentrations of mold spores because the spores are not contained indoors. In our homes is where there's a problem. In the 1970's housing insulation technologies improved to save us money on our heating bills. But it also made a perfect environment for mold and mildew to grow. Black mold becomes a problem when it is allowed to grow unchecked.

Discard jams and jellies with mold on them. The mold could be producing a mycotoxin (poisonous substance that can make you sick). USDA and microbiologists recommend against scooping out the mold and using the ramaining jam or jelly.